The 600R Loader has been redesigned to work effortlessly with the model year 2020 6110M and 6120M Tractors. In cadence with the sloped hood design of the tractor, the 600R Loader features curved booms, making an ideal tractor-loader combination. This combination also includes a 22.9-cm (9-in.) reduction in overall machine and loader length, improving forward visibility by over 2.1-m (7 ft). Pairing the model year 2020 6110M or 6120M Tractor with the 600R Loader allows visibility directly to the loader attachment, providing more efficient performance with any loader application.
Panoramic roof for increased visibility
600R Loader through 6120M Tractor panoramic roof
As the lift height of the R-Series Loaders increases, the larger panoramic roof inside the model year 2020 6110M and 6120M Tractor cabs provides additional visibility to the entire lift cycle of the loader. The 600R Loader has a lift height up to 391.2 cm (154 in.), allowing an operator to stack three bales. With the larger panoramic roof, tasks that require maximum loader height can be performed more easily.
Light-emitting diode (LED) light option for variable operating conditions
6110M Tractor and 600R Loader with LED light package
To further enhance visibility, the model year 2020 6110M/6120M Tractors and 600R Loader have the option to include LED lights. With LED lights emitting from the tractor cab and the loader boom, performing loader applications in variable operating conditions is made easier. Pairing the loader LED light option with an LED light package on the 6110M or 6120M Tractor will provide unmatched visibility to enhance operator experience during any task.
All 6M models come with the option to upgrade from mechanical to electronically controlled SCVs. To control a rear implement, up to four electrical SCVs or three electrical SCVs plus power beyond can be ordered. Each SCV features four positions – neutral, raise, lower, and float. The electrical SCVs are fully adjustable with the digital cornerpost display. Additionally, you can choose what SCVs are right for your operation with the following combinations of SCVs:
With Compact CommandARM™ console:
Up to four electrical SCVs possible or three plus power beyond
Loader packages with electrical joystick available
Mechanical SCVs are not available
With right-hand console:
Up to three mechanical SCVs possible plus power beyond
Up to four electrical SCVs possible or three plus power beyond
Combination of two electrical and one or two mechanical SCVs available
Loader packages with maximum of three mechanical SCVs available
Loader packages with electrical joystick available
For all 6M Series Tractors, an optional integrated John Deere Category 3N front hitch with hook-end draft links can be factory installed. The high lift capacity of 4400 kg (9,700 lb) maximum and 3300 kg (7,275 lb) through the full lift range ensures compatibility with heavy front implements and ballasts. If the tractor is not equipped with Triple-Link Suspension (TLS™), an accumulator will be installed to ensure driving comfort. The front hitch allows:
Maximum uptime with quick and easy changing from folded to working position
The operator to be highly flexible with the front ballast
Optional availability of integrated front power take-off (PTO)
If you are looking for a low-cost integrated guidance system, 6M Tractors come equipped with AutoTrac guidance using the digital cornerpost display. For this straight track only feature, you no longer need an additional display or activation. To utilize AutoTrac on the cornerpost display, simply order your 6M Tractor as AutoTrac Ready (code 1758) and install a StarFire™ 6000 Receiver (code 1881). While AutoTrac makes straight passes, you can focus more on job quality and leave the field less fatigued after a long day of mowing, spraying, or other field work.
Benefits of AutoTrac on the cornerpost display include:
Easy to access, setup, and initiate
Eliminate implement overlap and optimize machine efficiency
Reduce operator fatigue
Less cost than adding an additional display and activation
If you need more capabilities, like different track types or documentation, John Deere also offers a 4240 and 4640 Universal Display. These displays enable AutoTrac guidance that provides enhanced usability, increased performance, and greater operator choice. Additional benefits include:
The 6M Tractor was designed to ensure maximum maneuverability and visibility, no matter the job. With an updated sloped hood design, you can see it all – your front loader, attachments, and front-mounted implements – with an improved 5.5-m (18-ft) front view distance. This is 2.2 m (7.3 ft) more of visibility compared to previous models.
If you work in corrals and other small spaces, then you know how beneficial a shorter wheelbase can be when it comes to getting in and out of tight spots. The 6110M and 6120M feature a 17.8-cm (7-in.) shorter wheelbase (240 cm [94.5 in.]), giving you the power of a 6M Tractor with the nimbleness of a smaller tractor. Take advantage of a 4.3-m (14-ft) turning radius, perfect for cleaning out barns, working livestock, baling hay, roadside mowing applications, and more.
The 6110M through 6140M Tractors come equipped with Intelligent Power Management (IPM). IPM provides a 14.9-kW (20-hp) boost for operations that use rear power take-off (PTO) in high-power applications or in transport. Benefits of IPM include improved productivity, increased acceleration, and the ability to maintain desired transport speeds. The requirements for IPM to be active include:
Transport applications: The minimum ground speed where additional power begins to be applied for all models is 15 km/h (9.3 mph), assuming the engine is already fully loaded. Ramp-up to full additional power occurs as speed continues to increase.
PTO activation: Power must be sensed going through the PTO drive clutch by the electronic system. When using PTO-driven implements, engine power is increased gradually when ground speed exceeds 1 km/h (0.6 mph) if the electronic system detects a correspondingly high PTO power requirement. Full power becomes available from a speed of 2.5 km/h (1.5 mph).
John Deere 6120M with StarFire™ 6000 Receiver and tablet with JDLink
Operators looking to remotely access critical machine data and manage their fleet in one place can with JDLink. JDLink is the telematics system from John Deere that connects all machines in the field with office and mobile devices. The technology is based on a Modular Telematics Gateway (MTG) controller that collects and transmits data via a cellular network using selective data points in near-real time. With JDLink, operators can:
Remotely view information from a computer, phone, or tablet
Access machine data like engine hours and fuel level
Track machine location and history
Set up and manage geofence and curfews
Manage maintenance plans and alerts
John Deere 6155M and 835 Mower Conditioner with StarFire 6000 Receiver and JDLink
When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly—in the cab or anywhere you are.
John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink™ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.
With your permission, John Deere Connected Support:
Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
Saves time by remotely viewing in-cab displays, reducing trips to the machine
Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
Connects experts with the information needed to respond to downtime faster and prevent it altogether
With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.
6M Series Tractors have been redesigned to meet stringent reliability and serviceability requirements. Daily service requirements have been reduced and are simple to accomplish with improved accessibility to the engine. All 6M models are equipped with a 60-degree hood, and the 6110M and 6120M feature removable side panels, allowing easy access to reduce time and make serviceability even easier.
These features allow you to quickly and easily check parts like:
Engine oil filter
Engine fuel filter
Coolant recovery tank
Air cleaner
Additionally, the oil dipstick on the 6110M and 6120M allows you to check the engine oil level without opening the hood.
6155M with Premium light-emitting diode (LED) light package
Lights on the 6M Series Tractors have been positioned and designed to provide maximum visibility to the front, sides, and rear to increase productivity in any operating conditions. The updated cab lighting pattern provides 330 degrees of coverage while the hood lighting provides the remaining 30 degrees. You have two options to upgrade lighting with the Economy and Premium light packages available:
Economy light package
Two additional work lights in the front, side, and rear
Premium light package
Two additional work lights in the front, side, and rear
All lights are LED lights
Both packages require the 14-V/150-amp alternator (code 8741) and 12-V/174-amp-hr battery (code 8747).
Operators looking for a more comfortable, fuel efficient, and proven transmission can upgrade to an Infinitely Variable Transmission (AutoPowr™/IVT) system for any 6110M through 6140M tractor. The IVT system utilizes a combination of mechanical and hydrostatic power, providing stepless and continuous power across an infinitely variable range of speeds.
The single-speed lever is used for intuitive and accurate control of ground speeds as slow as 0.05 km/h (0.03 mph) to 40 km/h (25 mph). The wheel is quick and easy to adjust with the operator’s thumb to set the maximum commanded forward or reverse speed in each speed band. Operators can also enjoy reduced fuel costs and a quieter, more comfortable ride with transport speeds being reached at lower engine rpms. Additional benefits include:
Easy to operate
Less shifting time for better management of implements
Precise management of speeds
Under acceleration, engine rpm is kept to a minimum within the engines peak torque band to reduce noise and fuel consumption
6120M standard cab with Compact CommandARM™ console
There’s no denying you spend plenty of time in the cab. Make it quality time with the redesigned 6M Tractor cab. Guided by best-practice ergonomic principles and four different cab packages to customize the way you work, you’ll enjoy a more productive, comfortable, and efficient experience. All 6M Tractors will come standard with a digital cornerpost display, eliminating the previous instrument cluster behind the steering wheel. This easy-to-read digital display gives you access to all critical machine data and settings in one place. Additionally, premium options have been made available to let you customize your 6M to fit any operation including:
Mechanical or electrical reconfigurable joystick with PowrReverser™ functionality
Quickly and easily change directions with the push of a button while doing loader work
Compact CommandARM™ console
Swivel in your seat and have all the controls at your fingertips
Triple-Link Suspension (TLSTM)
Increase both transport and field productivity with superior stability, ride, and comfort with a suspended front axle
Mechanical cab suspension
Panoramic roof
Panoramic roof
Cornerpost display
Bluetooth is a trademark of Bluetooth SIG, Inc.
Capacities
Diesel exhaust fluid (DEF) tank
19 L 5 U.S. gal.
Fuel tank
175 L 46.2 U.S. gal.
Crankcase oil volume
17 L 4.5 U.S. gal.
Cooling system
20 L 5.3 U.S. gal.
Transmission-hydraulic system
PowrQuad Plus/AutoQuad Plus: 60 L 15.9 U.S. gal.
Dimensions
Overall length
4377 mm 172.3 in.
Approximate shipping weight, Open;Cab
Cab: 5680 kg 12,522 lb
Overall height
Minimum: 2715/2763 mm (420/85R30 (148)) 106.89/108.78 in. Maximum: 2850/2900 mm (600/65R38 (175)) 112.20/114.17 in.
Front axle center
Ground clearance: Minimum: 364 mm 14.3 in. Maximum: 559 mm 22 in.
Overall width
Minimum: 2000 mm (420/85R30 (148)) 78.74 in. Maximum: 2550 mm (600/65R38 (175)) 100.39 in.
Wheelbase
2400 mm 94.5 in.
Drawbar
Drawbar category
Category 2
Maximum vertical load
Road/field use (250-mm extended): 2000 kg 4409.2 lb Field use (350-mm extended): 1400 kg 3086.5 lb Field use (400-mm extended): 1200 kg 2645.5 lb
Standard: Pressure compensated (PC) Optional: Pressure-and-flow compensated (PFC) system with Load Sensing function
Number of rear selective control valves (SCVs)
Standard: Two ISO couplers Optional: Two to four ISO couplers
Key Specs
Rear hitch category (SAE designation)
2/3N
Transmission type
Standard: John Deere 24-speed PowrQuad™ Plus 40 km/h Optional: John Deere 16-speed PowrQuad Plus 30 km/h John Deere 24-speed AutoQuad™ Plus 40 km/h John Deere 24-speed CommandQuad™ Plus 40 km/h AutoPowr™/IVT™ 40 km/h Creeper (PowrQuad Plus and AutoQuad Plus)
Non-self-leveling (NSL): 2347 kg 5174.24 lb Mechanical self-leveling (MSL): 1898 kg 4184.37 lb
Maximum lift height
NSL/MSL: 3.9 m 153.56 in.
Miscellaneous
Country of manufacture
Germany
Operator station
Inner cab volume
2.73 m3 96.41 cu ft
dB(A) rating
70 dBA
Radio
Optional integrated
Cab suspension
Optional: Mechanical Cab Suspension (MCS)
Instructional seat
Optional
Rollover protective structure, OOS
Gearshift location - console/floor Console
Cab glass area
Without roof hatch or panoramic roof: 4.85 m2 52.2 sq ft
Seat
Standard: Economy seat with mechanical suspension Optional: Standard seat with air suspension
Display
Cornerpost display (right-hand A-post) Functionalty: Performance monitor and individual settings
Precision AG
Remote diagnostics
Optional: JDLink
Telematic
Optional: JDLink™
Guidance
Optional: AutoTrac™ on cornerpost display (straight track only), AutoTrac with 4240/4640 Universal Display
Rear axle
Rear differential lock
Electrohydraulically with oil-cooled clutch
Final drive type
Three planetary gear reduction
Type
Standard: flange-type rear axle Optional: Rack-and-pinion rear axle - 79-mm (3.1-in.) shaft (2.556-m/8.4-ft length) Rack-and-pinion rear axle - 79-mm (3.1-in.) shaft - short version (2.286-m/7.5-ft length) mm
Brakes, type and control
Primary brake (footbrake): Oil-cooled self-equalizing, self-adjusting, hydraulically actuated Secondary brake: Hydraulically actuated, integrated into primary brake (lever on left-hand side of operator seat) Park lock: Mechanical transmission park lock Mechanical front-wheel drive (MFWD) braking: Automatic MFWD engagement (MFWD engaged for braking at speeds less than 5 km/h [3.1 mph]) Front axle brakes (optional): TLS™ with front axle brakes (oil cooled, self-equalizing, self-adjusting, hydraulically actuated)
Rear hitch
Sensing type
Electronic lower link
Remote control valves available
Standard
Hitch category (SAE designation)
2/3N
Rear axle differential lock
Electrohydraulically with oil-cooled clutch
Maximum lift capacity behind lift points
Standard: 3750 kg 8267.3 lb Optional: 5000 kg 11,023.1 lb
Rear power take-off (PTO)
PTO actuation
In-cab switch and external fender-mounted remote control
Standard: John Deere 24-speed PowrQuad Plus 40 km/h Optional: John Deere 16-speed PowrQuad Plus 30 km/h John Deere 24-speed AutoQuad Plus 40 km/h John Deere 24-speed CommandQuad Plus 40 km/h AutoPowr™/IVT™ 40 km/h Creeper (PowrQuad Plus and AutoQuad Plus)
Weight
Base machine weight
Front axle 2180 kg 4806 lb Rear axle 3500 kg 7716 lb 5680 kg 12,522 lb
Fill out this form to request a quote. A representative will get in touch with you as soon as possible.
Thank you for submitting.
Request Service
Fill out our request form to contact us about service.
Thank you for submitting.
Request Parts
Fill out our request form to contact us about parts.
Thank you for submitting.
Request Used Parts
Fill out our request form to contact us about used parts.
Thank you for submitting.
Request Rental
Fill out our request form to contact us about rentals.
Thank you for submitting.
Contact us about Precision Ag
Fill out our request form to contact us about precision ag technology.
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Learn More About Our Service Programs
Thank you for submitting.
Send us your feedback
We'd love to hear your feedback! Please fill out the form below to share.
Thank you for submitting.
Body Shop
Fill out this form to get in contact with our body shop. A representative will get in touch with you as soon as possible.
Thank you for submitting.
Papé Technician Training Program Interest Application
Thank you for submitting.
Technician Application
Thank you for submitting.
Events, Donations and Sponsorships
Thank you for submitting.
Join The Papé Team
Fill out our career form and a representative will be back in touch with you soon.
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Thank you for coming in, you are important to us! Please fill in your information below and one of our members will help you as soon as we can.
Thank you for submitting.
Thank you for your interest in electrification, you are important to us! Please fill in your information below and one of our members will reach out to you as soon as we can.
Thank you for submitting.
Giveaway Submission
Thank you for submitting.
Vaccination Status Survey
Thank you for submitting.
General Newsletter
Thank you for submitting.
Hawaii Newsletter
Thank you for submitting.
Request Dealer Transfer
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Thank you for your interest in upgrading to a premium John Deere compact utility tractor. Please fill in your information below and a Papé Machinery member will contact you shortly.