Specifications

Capacities

Diesel exhaust fluid (DEF) tank 19 L
5 U.S. gal.
Fuel tank 175 L
46.2 U.S. gal.
Crankcase oil volume 17 L
4.5 U.S. gal.
Cooling system 20 L
5.3 U.S. gal.
Transmission-hydraulic system PowrQuad Plus/AutoQuad Plus: 60 L
15.9 U.S. gal.

Dimensions

Overall length 4377 mm
172.3 in.
Approximate shipping weight, Open;Cab Cab: 5680 kg
12,522 lb
Overall height Minimum: 2715/2763 mm (420/85R30 (148))
106.89/108.78 in.
Maximum: 2850/2900 mm (600/65R38 (175))
112.20/114.17 in.
Front axle center Ground clearance: Minimum: 364 mm
14.3 in.
Maximum: 559 mm
22 in.
Overall width Minimum: 2000 mm (420/85R30 (148)) 78.74 in.
Maximum: 2550 mm (600/65R38 (175)) 100.39 in.
Wheelbase 2400 mm
94.5 in.

Drawbar

Drawbar category Category 2
Maximum vertical load Road/field use (250-mm extended): 2000 kg
4409.2 lb
Field use (350-mm extended): 1400 kg
3086.5 lb
Field use (400-mm extended): 1200 kg
2645.5 lb

Electrical system

Alternator size Standard: 14 V/120 amp
Optional: 14 V/150 amp
14 V/200 amp
Battery options Standard: 12 V/154 amp-hr
Optional: 12 V/174 amp-hr

Engine performance

Power boost 10 percent
PTO torque rise 40 percent
Rated PTO power (hp SAE) 62 kW
84 hp
Engine peak torque At 1600 U/min: 515 Nm
379.84 lb-ft
Maximum PTO power At 1000 PTO rpm with IPM: 80 kW
109 hp
Rated power 81 kW
110 hp
w/ IPM: 96 kW
130 hp
Maximum engine power 90 kW
122 hp
w/ IPM: 98 kW
134 hp

Engine specifications

Displacement 4.5 L
275 cu in.
Rated speed 2100 rpm
Emission level Final Tier 4
Engine family JDXL04.5317
Description John Deere PowerTech EWL
Aspiration Single turbocharger with wastegate
Engine type 4045HL290
After treatment type Diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) using diesel exhaust fluid (DEF)

Front axle

Front axle differential lock Self-locking differential
Type Standard: MFWD
Optional: Two-wheel drive (2WD)
Triple-Link Suspension (TLS) MFWD axle (hydro-pneumatic, permanently active, triple link, self-leveling suspension with 100-mm [3.9-in.] suspension range)
Triple-Link Suspension MFWD with brakes

Front hitch

Category 3N
PTO speed 1000 PTO: 1969 rpm
Front power take-off (PTO) Electrohydraulically engaged with oil-cooled, multi-disc design
Electric power Seven-pin electrical socket
Standard lift capacity 4400 kg
9700.3 lb

Hydraulic system

Joystick SCV control Mechanical/electrical
Number of mid selective control valves (SCVs) Up to three
Pump rated output Standard: 35-cc pump: 80 L/min
21 gpm
Optional: 45-cc pump: 114 L/min
30 gpm
Type Standard: Pressure compensated (PC)
Optional: Pressure-and-flow compensated (PFC) system with Load Sensing function
Number of rear selective control valves (SCVs) Standard: Two ISO couplers
Optional: Two to four ISO couplers

Key Specs

Rear hitch category (SAE designation) 2/3N
Transmission type Standard: John Deere 24-speed PowrQuad™ Plus 40 km/h
Optional: John Deere 16-speed PowrQuad Plus 30 km/h
John Deere 24-speed AutoQuad™ Plus 40 km/h
John Deere 24-speed CommandQuad™ Plus 40 km/h
AutoPowr™/IVT™ 40 km/h
Creeper (PowrQuad Plus and AutoQuad Plus)
Rated engine power 81 kW
110 hp
Rated Power with IPM: 96 kW
130 hp
Engine displacement 4.5 L
275 cu in.
Maximum engine power 90 kW
122 hp
w/ IPM: 98 kW
134 hp
Base machine weight 5680 kg
12,522 lb
Maximum PTO power At 1000 PTO rpm with IPM: 80 kW
109 hp
Engine description John Deere PowerTech™ EWL
Hydraulic pump rated output Standard: 35-cc pump: 80 L/min
21 gpm
Optional: 45-cc pump: 114 L/min
30 gpm
Rated PTO power (hp SAE) 62 kW
84 hp

Loaders

Loader 600R
Lift capacity at full height Non-self-leveling (NSL): 2347 kg
5174.24 lb
Mechanical self-leveling (MSL): 1898 kg
4184.37 lb
Maximum lift height NSL/MSL: 3.9 m
153.56 in.

Miscellaneous

Country of manufacture Germany

Operator station

Inner cab volume 2.73 m3
96.41 cu ft
dB(A) rating 70 dBA
Radio Optional integrated
Cab suspension Optional: Mechanical Cab Suspension (MCS)
Instructional seat Optional
Rollover protective structure, OOS Gearshift location - console/floor
Console
Cab glass area Without roof hatch or panoramic roof: 4.85 m2
52.2 sq ft
Seat Standard: Economy seat with mechanical suspension
Optional: Standard seat with air suspension
Display Cornerpost display (right-hand A-post)
Functionalty: Performance monitor and individual settings

Precision AG

Remote diagnostics Optional: JDLink
Telematic Optional: JDLink™
Guidance Optional: AutoTrac™ on cornerpost display (straight track only), AutoTrac with 4240/4640 Universal Display

Rear axle

Rear differential lock Electrohydraulically with oil-cooled clutch
Final drive type Three planetary gear reduction
Type Standard: flange-type rear axle
Optional: Rack-and-pinion rear axle - 79-mm (3.1-in.) shaft (2.556-m/8.4-ft length)
Rack-and-pinion rear axle - 79-mm (3.1-in.) shaft - short version (2.286-m/7.5-ft length) mm
Brakes, type and control Primary brake (footbrake): Oil-cooled self-equalizing, self-adjusting, hydraulically actuated
Secondary brake: Hydraulically actuated, integrated into primary brake (lever on left-hand side of operator seat)
Park lock: Mechanical transmission park lock
Mechanical front-wheel drive (MFWD) braking: Automatic MFWD engagement (MFWD engaged for braking at speeds less than 5 km/h [3.1 mph])
Front axle brakes (optional): TLS™ with front axle brakes (oil cooled, self-equalizing, self-adjusting, hydraulically actuated)

Rear hitch

Sensing type Electronic lower link
Remote control valves available Standard
Hitch category (SAE designation) 2/3N
Rear axle differential lock Electrohydraulically with oil-cooled clutch
Maximum lift capacity behind lift points Standard: 3750 kg
8267.3 lb
Optional: 5000 kg
11,023.1 lb

Rear power take-off (PTO)

PTO actuation In-cab switch and external fender-mounted remote control
Type Electrohydraulically operated, oil-cooled, multi-disc design
Standard: 38 mm (1.496 in.) 540, 1000 reversible shaft
Engine rpm (at rated PTO speeds) 540: 1977 rpm
1000: 1972 rpm

Serviceability

Interval for engine oil change 500 hours
Interval for engine coolant change 6000 hours
Interval for hydraulic/transmission oil change 1500 hours

Steering

Type Dynamic load sensing, hydrostatic, flow metering

Tires

Rear 600/65R38 (175)

Transmission

Reverser Electronic left-hand reverser
Creeper Optional
Type Standard: John Deere 24-speed PowrQuad Plus 40 km/h
Optional: John Deere 16-speed PowrQuad Plus 30 km/h
John Deere 24-speed AutoQuad Plus 40 km/h
John Deere 24-speed CommandQuad Plus 40 km/h
AutoPowr™/IVT™ 40 km/h
Creeper (PowrQuad Plus and AutoQuad Plus)

Weight

Base machine weight Front axle
2180 kg
4806 lb
Rear axle
3500 kg
7716 lb
5680 kg
12,522 lb
Maximum permissible weight 9500 kg
20,944 lb

Additional information

Date collected 19-Mar-20