Key Features & Specs
- 7-Iron™ PRO Mowing Deck
- Electronic Fuel Injection
- Gasoline Engine
- Rear Discharge Deck
- California CARB Approved
- 7-Iron™ PRO Mulch On Demand deck options n/a
- Fuel options Electronic Fuel Injected Gasoline
- Rear Discharge Deck options 60", 72"
- 7-Iron™ PRO side discharge deck options 60", 72"
- 7-Iron™ II side discharge deck options n/a
- HP* 29.0 (21.6 kW)
Specifications
Blades
Number | Three |
Thickness | 0.25 in. 0.64 cm |
Blade tip speed | Approximately 18,000 fpm |
Length | Varies by deck size |
Brakes
Park brake actuation | Foot brake |
Park brake | Internal wet disk integrated in the transmission |
Dynamic braking | Twin levers |
Buyer's note
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Dimensions
Length | 84 in. 213.4 cm |
Height | With ROPS up, 73 in. 185.4 cm With ROPS down, 47 in. 119.4 cm |
Width | With chute down, 74 in. 188 cm |
Weight | 1,275 to1,365 lb 578 to 619 kg |
Drivetrain
Speed and direction control | Twin levers |
Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor |
Hydraulic capacity | 5.9 U.S. qt 5.6 L |
Transmission | Hydrostatic |
Filter | Internal, replaceable |
Travel speed | Speed range 0-12 mph 0-19.3 km/h Forward 0-12 mph 0-19.3 km/h Reverse 0-4.5 mph 0-7.2 km/h |
Electrical system
Cold cranking amp | 300 amp |
Charge system | 20 amp |
Hour meter | Standard, digital |
Operator presence starting system | Brake-N-Go (foot) |
Battery voltage | 12 V |
Engine
Air cleaner | Pre-cleaner Yes Heavy-duty canister type with safety element |
Crankcase capacity | With filter, 2.7 U.S. qt 2.6 L |
Oil filter | Full flow, replaceable |
Displacement | 50.3 cu in. 824 cc |
Lubrication | Full pressure |
Power | Gross t 3,600 rpm: 29 hp 21.6 kW |
Cylinders | Two |
Manufacturer/Model | ECV860J EFI |
Cooling | Air |
Fuel system
Fuel type | Gasoline |
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
Fuel tank switch/shut-off valve | Yes |
Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.0-1.8 U.S. gal./hr 3.8-6.8 L/hr |
Key Specs
Blade tip speed | Approximately 18,000 fpm |
Engine Power | Gross at 3,600 rpm: 29 hp 21.6 kW |
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Mower deck Size | 60 in. 152 cm |
Transmission | Hydrostatic |
Caster wheels | 13x6.5-6 |
Engine Manufacturer/model | ECV860J EFI |
Speed range | 0-12 mph 0-19.3 km/h |
Drive wheels | 24x12-12 |
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
Mower decks
Size | 60 in. 152 cm |
Discharge | Side |
Deck thickness | 7 gauge 0.18 in. 4.6 mm |
Height-of-cut range | Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm |
Cutting width | 60 in. 152 cm |
Deck construction | 7-Iron™ PRO, one-piece stamped steel with reinforcements |
PTO
Drive | V-belt |
Type | Electro-magnetic, 225 lb-ft 305 Nm |
Tires
Load rating | 4 PR |
Drive wheels | 24x12-12 |
Wheels
Front anti-scalp rollers | RH, center, LH |
Rear anti-scalp rollers | Optional |
Caster wheels | 13x6.5-6 |
Caster wheel type | Flat free |
Additional information
Date collected | 9-Aug-2019 |