Specifications

Blades

Length Varies by deck size
Number Three
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Thickness 0.25 in.
0.64 cm

Brakes

Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake

Buyer's note

Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation

Dimensions

Length 84 in.
213.4 cm
Weight 1,275 to1,365 lb
578 to 619 kg
Width With chute down, 74, 86 in.
188, 218.4 cm
Height With ROPS up, 73 in.
185.4 cm
With ROPS down, 47 in.
119.4 cm

Drivetrain

Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Speed and direction control Twin levers
Filter Internal, replaceable
Transmission Hydrostatic
Travel speed Speed range
0-10 mph
0-16.1 km/h
Forward
0-10 mph
0-16.1 km/h
Reverse
0-4.5 mph
0-7.2 km/h
Hydraulic capacity 5.9 U.S. qt
5.6 L

Electrical system

Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (hand)

Engine

Cylinders Two
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Power Gross t 3,600 rpm: 29 hp
21.6 kW
Manufacturer/Model ECV860J EFI
Crankcase capacity With filter, 2.7 U.S. qt
2.6 L
Displacement 50.3 cu in.
824 cc
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element

Fuel system

Fuel type Gasoline
Fuel tank switch/shut-off valve Yes
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.0-1.8 U.S. gal./hr
3.8-6.8 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L

Key Specs

Engine Power Gross at 3,600 rpm: 29 hp
21.6 kW
Drive wheels 24x12-12
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Caster wheels 13x6.5-6
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Mower deck Size 60, 72 in.
152, 183 cm
Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation
Transmission Hydrostatic
Engine Manufacturer/model ECV860J EFI
Speed range 0-10 mph
0-16.1 km/h

Mower decks

Deck construction 7Iron PRO, one-piece stamped steel with reinforcements
Discharge Side, MOD
Size 60, 72 in.
152, 183 cm
Deck thickness 7 gauge
0.18 in.
4.6 mm
Cutting width 60, 72 in.
152, 183 cm
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm

PTO

Drive V-belt
Type Electro-magnetic, 225 lb-ft
305 Nm

Tires

Load rating 4 PR
Drive wheels 24x12-12

Wheels

Caster wheel type Flat free
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
Caster wheels 13x6.5-6

Additional information

Date collected 23-May-2018

John Deere Z955M EFI Image Gallery