Specifications

Blades

Length Varies by deck size
Number Three
Thickness 0.25 in.
0.64 cm
Blade tip speed Approximately 18,000 fpm
5,486 m/min

Brakes

Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Foot brake

Buyer's note

Warranty 36 months or 1500 hours, whichever comes first
First 24 months, no hour limitation

Dimensions

Width With chute down, 74, 86 in.
188, 218 cm
Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight 1,292 to 1,340 lb
586 to 608 kg
Length 84 in.
213 cm

Drivetrain

Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Speed and direction control Twin levers
Filter Internal, replaceable
Transmission Hydrostatic
Hydraulic capacity 5.9 U.S. qt
5.6 L
Travel speed Speed range
0-12 mph
19.3 km/h
Forward
0-12 mph
19.3 km/h
Reverse
0-4.5 mph
0-7.2 km/h

Electrical system

Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (foot)

Engine

Cylinders Two
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Manufacturer/Model FX850V
Power Gross at 3,600 rpm, 27 hp
20.1 kW
Displacement 52 cu in.
852 cc
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Crankcase capacity With filter, 2 U.S. qt
1.9 L

Fuel system

Fuel type Gasoline
Fuel tank switch/shut-off valve Yes
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L

Key Specs

Engine Manufacturer/model FX850V
Drive wheels 24x12-12
Caster wheels 13x6.5-6
Transmission Hydrostatic
Warranty 36 months or 1500 hours, whichever comes first
First 24 months, no hour limitation
Mower deck Size 60, 72 in.
152, 183 cm
Engine Power Gross at 3,600 rpm: 27 hp
20.1 kW
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Speed range 0-12 mph
0-19.3 km/h
Fuel tank capacity 11.5 U.S. gal.
43.5 L

Mower decks

Deck construction 7-Iron PRO, one-piece stamped steel with reinforcements
Discharge Side, Mulch On Demand™ system
Size 60, 72 in.
152, 183
Cutting width 60, 72 in.
152, 183 cm
Deck thickness 7 gauge
0.18 in.
4.6 mm
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm

PTO

Drive V-belt
Type Electro-magnetic, 225 lb-ft
305 Nm

Tires

Load rating 4 PR
Drive wheels 24x12-12

Wheels

Caster wheel type Flat free
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
Caster wheels 13x6.5-6

Additional information

Date collected 11-Sep-2018

John Deere Z950R Image Gallery