Specifications

Blades

Length Varies by deck size
Number Three
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Thickness 0.25 in.
0.64 cm

Brakes

Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake

Buyer's note

Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation

Dimensions

Length 84 in.
213.4 cm
Weight 1,275 to1,365 lb
578 to 619 kg
Width With chute down, 74 in.
188 cm
Height With ROPS up, 73 in.
185.4 cm
With ROPS down, 47 in.
119.4 cm

Drivetrain

Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Speed and direction control Twin levers
Filter Internal, replaceable
Transmission Hydrostatic
Travel speed Speed range
0-10 mph
0-16.1 km/h
Forward
0-10 mph
0-16.1 km/h
Reverse
0-4.5 mph
0-7.2 km/h
Hydraulic capacity 5.9 U.S. qt
5.6 L

Electrical system

Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (hand)

Engine

Cylinders Two
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Power Gross at 3,600 rpm, 27 hp
20.1 kW
Manufacturer/Model ECV850 EFI
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Displacement 50.3 cu in.
824 cc
Crankcase capacity With filter, 2.7 U.S. qt
2.6 L

Fuel system

Fuel type Gasoline
Fuel tank switch/shut-off valve Yes
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.0-1.8 U.S. gal./hr
3.8-6.8 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L

Key Specs

Fuel tank capacity 11.5 U.S. gal.
13.5 L
Drive wheels 24x12-12
Mower deck Size 60 in.
152 cm
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Engine Power Gross at 3,600 rpm: 27 hp
20.1 kW
Caster wheels 13x6.5-6
Engine Manufacturer/model ECV850 EFI
Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation
Transmission Hydrostatic
Speed range 0-10 mph
0-16.1 km/h

Mower decks

Deck construction 7Iron PRO, one-piece stamped steel with reinforcements
Size 60 in.
152 cm
Discharge Side, Mulch On Demand™ system
Deck thickness 7 gauge
0.18 in.
4.6 mm
Cutting width 60 in.
152 cm
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm

PTO

Drive V-belt
Type Electro-magnetic, 225 lb-ft
305 Nm

Tires

Load rating 4 PR
Drive wheels 24x12-12

Wheels

Caster wheel type Flat free
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
Caster wheels 13x6.5-6

Additional information

Date collected 11-Sep-2017

John Deere Z945M EFI Image Gallery