Key Features & Specs
- 7-Iron™ PRO deck
- Mulch On Demand™ Available
- Gasoline Engine
- Propane Option Available
- Rear Discharge Deck
- Fuel options Gasoline
- HP* 25.5 (19.0 kW)
- 7-Iron™ PRO Mulch On Demand deck options 60"
- 7-Iron™ PRO side discharge deck options 54", 60"
- 7-Iron™ II side discharge deck options n/a
- Rear Discharge Deck options 60"
Specifications
Blades
| Length | Varies by deck size |
| Number | Three |
| Blade tip speed | Approximately 18,000 fpm 60 in. rear discharge: approximately 15,000 fpm |
| Thickness | 0.25 in. 0.64 cm |
Brakes
| Dynamic braking | Twin levers |
| Park brake | Internal wet disk integrated in the transmission |
| Park brake actuation | Hand brake |
Buyer's note
| Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Dimensions
| Weight | 1,275 to 1,365 lb 578 to 619 kg |
| Length | 84 in. 213 cm |
| Width | With chute down, 68, 74 in. 173, 188 cm Rear discharge, 63.5 in. 161.3 cm |
| Height | With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm |
Drivetrain
| Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor |
| Speed and direction control | Twin levers |
| Filter | Internal, replaceable |
| Transmission | Hydrostatic |
| Hydraulic capacity | 5.9 U.S. qt 5.6 L |
| Travel speed | Speed range 0-10 mph 0-16.1 km/h Forward 0-10 mph 0-16.1 km/h Reverse 0-4.5 mph 0-7.2 km/h |
Electrical system
| Charge system | 20 amp |
| Battery voltage | 12 V |
| Cold cranking amp | 300 amp |
| Hour meter | Standard, digital |
| Operator presence starting system | Brake-N-Go (hand) |
Engine
| Cylinders | Two |
| Oil filter | Full flow, replaceable |
| Lubrication | Full pressure |
| Cooling | Air |
| Manufacturer/Model | FX801V |
| Power | Gross at 3,600 rpm 25.5 hp 19 kW |
| Air cleaner | Pre-cleaner Yes Heavy-duty canister type with safety element |
| Crankcase capacity | With filter, 2.4 U.S. qt 2.3 L |
| Displacement | 52 cu in. 852 cc |
Fuel system
| Fuel type | Gasoline |
| Fuel tank switch/shut-off valve | Yes |
| Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
| Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 4.2-7.2 L/hr |
Key Specs
| Drive wheels | 24x12-12 |
| Caster wheels | 13x6.5-6 |
| Engine Manufacturer/model | FX801V |
| Transmission | Hydrostatic |
| Mower deck size | 54, 60 in. 137, 152 cm |
| Blade tip speed | Approximately 18,000 fpm 60 in. rear discharge: approximately 15,000 fpm |
| Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
| Speed range | 0-10 mph 0-16.1 km/h |
| Engine power | Gross at 3,600 rpm 25.5 hp 19 kW |
| Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Mower decks
| Cutting width | 54, 60 in. 137, 152 cm |
| Discharge | Side, Mulch On Demand™ system, rear |
| Size | 54, 60 in. 137, 152 cm |
| Deck thickness | 7 gauge 0.18 in. 4.6 mm |
| Height-of-cut range | Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm |
Operation
| Rollover protective structure (ROPS) | Yes |
| Slope operating limit | 20 degrees (10 degrees with material collection system installed) |
PTO
| Drive | V-belt |
| Type | Electro-magnetic, 225 lb-ft 305 Nm |
Tires
| Load rating | 4 PR |
| Drive wheels | 24x12-12 |
Wheels
| Caster wheel type | Flat free |
| Front anti-scalp rollers | RH, center, LH |
| Caster wheels | 13x6.5-6 |
| Rear anti-scalp rollers | Standard |
Additional information
| Date collected | 1-Sep-2020 |
John Deere Z930M Image Gallery

