Specifications

Blades

Length Varies by deck size
Number Three
Blade tip speed Approximately 18,000 fpm
Thickness 0.25 in.
0.64 cm

Brakes

Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake

Buyer's note

Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation

Dimensions

Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight 1,100 to 1,178 lb
499 to 534 kg
Length 84 in.
213 cm
Width With chute down, 62, 68, 74 in.
157, 173, 188 cm

Drivetrain

Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Speed and direction control Twin levers
Filter Internal, replaceable
Transmission Hydrostatic
Hydraulic capacity 5.9 U.S. qt
5.6 L
Travel speed Speed range
0-10 mph
0-16.1 km/h
Forward
0-10 mph
0-16.1 km/h
Reverse
0-4.5 mph
0-7.2 km/h

Electrical system

Charge system 15 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (hand)

Engine

Cylinders Two
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Manufacturer/Model CV742
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Crankcase capacity With filter, 2 U.S. qt
1.9 L
Displacement 45.6 cu in.
747 cc
Power At 3,600 rpm, 25 hp
18.6 kW

Fuel system

Fuel type Gasoline
Fuel tank switch/shut-off valve Yes
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L

Key Specs

Caster wheels 13x5-6
Drive wheels 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)
Engine Manufacturer/model CV742
Transmission Hydrostatic
Blade tip speed Approximately 18,000 fpm
Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation
Mower deck Size 48, 54, 60 in.
122, 137, 152 cm
Engine Power Gross at 3,600 rpm: 25 hp
18.6 kW
Speed range 0-10 mph
0-16.1 km/h
Fuel tank capacity 11.5 U.S. gal.
43.5 L

Mower decks

Deck construction One-piece stamped steel with reinforcements
Discharge Side
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Size 48, 54, 60 in.
122, 137, 152 cm
Cutting width 48, 54, 60 in.
122, 137, 152 cm
Deck thickness 7 gauge
0.18 in.
4.6 mm

PTO

Drive V-belt
Type Electro-magnetic, 200 lb-ft
271 Nm

Tires

Load rating 4 PR
Drive wheels 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)

Wheels

Caster wheel type Pneumatic Front
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
Caster wheels 13x5-6

Additional information

Date collected 11-Sep-2018

John Deere Z915E Image Gallery