1600 Turbo Series III

  • John Deere
  • Front & Wide Area Mowers

Contact Your Preferred Store:

John Deere 1600 Turbo Series III
Key Features & Specs
  • Turbocharged diesel engine
  • B20 compatible
  • Rear-discharge decks
  • FT4 engine compliant
  • Fuel Options Diesel
  • Features B20 Compatible
  • HP 60.0 hp
  • Deck Options 7-gauge steel deck
    62 in. center, (2) 42 in. wings
    Rear discharge

Specifications

Anti-scalp rollers

Type Flat-free
Wing deck caster wheels Four, 11x4-5, flat-free
Front deck caster wheels Two, 11x4-5, flat-free

Blades

Total mower blades Seven, three center and two each side
Interchangeable mower blades between all decks Yes
Blade length 22 in.
55.88 cm
Blade width 2.5 in.
6.35 cm
Blade tip speed 13,000 fpm
3,962 m/min
Blade thickness 0.312 in.
0.79 cm

Brakes

Type Internal, wet disc
Steering brakes Standard
Parking brakes Hand brake

Buyer's notes

Certification ANSI B71.4
Warranty 24 months

Controls

Throttle Hand
Forward/reverse Two-pedal
Mower lift Three two-function switches
Park brake Foot pedal/disk
Indicator lights Engine air heater, oil pressure light, engine temperature light, fuel gauge, hydraulic oil temperature light
PTO engagement/disengagement Electric solenoid
Circuit Series
Deck drive pump Displacement, axial piston pump, 2.48 cu in.
40.6 cc
PTO engagement Type
Hydraulic, independent
Electric solenoid switch
Deck motor Type
Hydraulic, open center, closed loop
Displacement, gear motor, 2.5 cu in.
41 cc

Dimensions

Length (with deck) 132 in.
335 cm
Wheel base 60 in.
152 cm
Tread width 52 in.
131 cm
Ground clearance 6.5 in.
16.5 cm
Vehicle weight 4,173 lb
1,892.8 kg
Height with ROPS ROPS up, 98 in.
249 cm
ROPS down, 74 in.
188 cm
With four-post canopy ROPS, 82 in.
208 cm
Machine weight without the deck 3,264 lb
1,474.2 kg
Transport width 84 in.
213 cm
Width with decks down 134 in.
340 cm

Drivetrain

Transaxle type Dual range
Transaxle Tuff Torque (Kanzaki)
4 wheel drive type Mechanical rear-wheel drive
Differential lock Mechanical, foot activated
Final drive Planetary
Transmission Hydrostatic
4 wheel drive On demand or full time

Electrical

Charging system Automotive type
Alternator 75 amp
Battery voltage 12 V
Battery cold crank amps 675 CCA
Starter size 1.9 hp
1.4 kW

Engine

Model 4TNV86CT-DJWM (T4)
Injection Direct
Starting aid Engine glow plug
Cylinders Four
Cycle Four
Rated engine speed 3,000 rpm
Operating range With isochronous governor 1,400-3,030 rpm
Lubrication Pressurized by lobe-style pump
Oil filter Spin-on
Cooling Liquid-cooled water centrifugal
Compression ratio 19:01
Air cleaner Dual element, dry type
Air restriction indicator Standard, progressive type
Engine shutoff Key
Radiator location Rear mounted
Radiator fins per inch 10 fins per inch
Power Gross power SAE J1995 at 3,000 rpm, PS 60 hp
44 kW
Max Torque per SAE J1349 (net continuous) 117.3 lb-ft
159 Nm
Crankcase capacity 6.1 U.S. qt
5.8 L
Bore and stroke 3.4x3.5 in.
86x90 mm
Cooling system capacity 2.5 U.S. gal.
7.5 L
Displacement 127.6 cu in.
2.091 L
2,091 cc
Operating torque (net continuous @ 3000 rpm) 103 lb-ft
140 Nm

Frame

Frame type Welded, tubular steel
Thickness 11 gauge
0.12 in.
3 mm

Fuel consumption

One-half load 1.93 U.S. gal./hr
7.31 L/hr
Full load 3.33 U.S. gal./hr
12.7 L/hr

Fuel system

Fuel type Diesel
Fuel transfer pump Electric
Fuel filter Replaceable, spin-on type
Water separator Replaceable, 100-mesh element
Cold start device Increased timing for better cold starting
Fuel pump type Mechanical
Fuel tank location Left side of the machine
Self bleeding System is self-bleeding because of the electric fuel transfer pump
Fuel tank capacity 22 U.S. gal.
83.3 L
Fuel neck opening 3 in.
7.6 cm

Hydraulic system

Type Closed loop, hydrostatic
Steering relief 1,087 psi
Implement relief 1,600 psi
Traction drive pump Displacement, axial piston pump, 3 cu in.
49 cc
Motor Displacement, axial piston pump, 2 cu in.
33 cc
Hydraulic reservoir capacity 14 U.S. gal.
53 L

Implement lift

Type Hydraulic, open center
Pump Gear
Lift cylinders Bore 2 in.
50.8 mm

Key Specs

Warranty 24 monhs
Engine Manufacturer/model 4TNV86CT-DJWM (T4)
Transmission Hydrostatic
Drive tires 26x12-12
Engine Power Gross power SAE J1995 at 3,000 rpm, PS 60 hp
44 kW
Mower deck Size 62, 94, 128 in.
157, 239, 325 cm
Speed range 0-15 mph
0-24 km/h
Fuel tank capacity 22 U.S. gal./hr
83.3 L
Blade tip speed 13,000 fpm
3,962 m/min
Caster wheels Four, 11x4-5, flat-free
Two, 11x4-5, flat-free

Mower decks

Deck drive type Hydraulic, closed loop
Spindle bearings greaseable Yes
Energy-absorbing wing decks Yes
Deck circuit Series
Blade drive C-section, V-belt
Transport lock Standard
Discharge Rear
Deck construction Fabricated steel
Height-of-cut range 1-5.5 in.
2.5-13.9 cm
Center deck cutting width 62 in.
157 cm
Size 62, 94, 128 in.
157, 239, 325 cm
Wing deck cutting width 42 in.
107 cm
Spindles Heat treated, diameter, 1 in.
2.54 cm
Deck thickness 7 gauge
0.18 in.
4.6 mm
Wing deck float Up (while maintaining PTO engagement)
45 degrees
Down (while maintaining PTO engagement)
20 degrees

Mowing rate

80% field efficiency 85% field efficiency at 10 mph
16 km/h
11 acres/hr

Operator station

Safety Safety interlock and operator presence system
Seat Adjustment positions
Multi
Armrests
Yes, adjustable
Air-ride suspension seat, adjustable, deluxe, high-backed, back angle adjustment, lumbar adjustment, standard armrests

ROPS

Type Standard two-post folding ROPS or four-post canopy ROPS meets ISO21299 standard

Sound level (without cab)

With deck 94 dBA
Without deck 89 dBA

Steering

Type Power, hydrostatic
Tilt steering wheel Standard
Turns lock-to-lock 2.5
Turning radius 39 in.
99 cm

Tires

Steering tires (rear) 18x9.5-8
Tread Multi-trac
Ply rating 6 PR (both)
Drive tires Pressure
30 psi , 206.8 kPa (front)
28 psi, 193.1 kPa (rear)
26x12-12

Travel speed

Low reverse speed 0-4.5 mph
0-7.2 km/h
High reverse speed 0-7.5 mph
0-12 km/h
Low forward speed 0-9 mph
0-14.5 km/h
Speed range 0-15 mph
0-24 km/h
High forward speed 0-15 mph
0-24 km/h

Additional information

Date collected 12-Oct-2017