Specifications

Brakes

Type Internal wet disk
Individual turn brakes Standard
Master brake Standard, locking

Buyer's notes

Warranty 24 months

Dimensions

ROPS Factory installed ComfortCab
Wheelbase 49.2 in.
125 cm
Shipping weight Net weight without mower or fuel: 2,436 lb
1,105 kg
Ground clearance 6.5 in.
16.5 cm
Overall height with ROPS With cab: 83.9 in.
213 cm
Overall width With 26x12 wide-stance tires: 58 in.
147.3 cm
Length Less mower deck: 86.7 in.
220.2 cm
ROPS certification Two-post: OSHA 1928; Canadian Std.: CSA-352
Four-post: SAE J2194; EU Standard: 86/298/EEC; ISO 21299:2009

Drivetrain

Transmission Hydrostatic full time 4WD, on-demand
Cruise control Optional
Speed and direction control Two-pedal foot
Hi/Lo range No, single speed transmission

Engine

Rated engine rpm 3,000 rpm
Cylinders Three
Injection Direct
Fuel type Diesel (B20 compatible)
Cooling Liquid
Air cleaner Dual element dry type
Air restriction indicator Standard
Charging system Automotive type
Alternator, amp 95 amp
Battery 12 V
Manufacturer/model 3TNV88C
Fuel tank capacity 16 U.S. gal.
60.6 L
Cooling capacity 10 U.S. qt
9.5 L
Maximum torque At 1,950 rpm: 80.4 lb-ft
109 Nm
Power Gross
PS, 37.4 hp
27.5 kW
Displacement 100.2 cu in.
1.64 L

Hydraulics

Type Open center
Spool valve Front lift, standard
Lift cylinders Two
Pump capacity 5.1 U.S. gpm
19.3 L/min

Key Specs

Engine Manufacturer/model 3TNV88C
Transmission Hydrostatic full time 4WD, on-demand
Caster wheels Flat free, 11x4-5
Drive wheels 23x10.5-12
Warranty 24 months
Speed range 0-12 mph
0-19.3 km/h
Engine Power Gross PS: 37.4 hp
27.5 kW
Fuel tank capacity 16 U.S. gal.
60.6 L
Blade tip speed 18,000 fpm
5,486 m/min
Mower deck Size 60 or 72 in.
152, 183 cm

Mower deck (rear discharge)

Cutting width 62, 72 in.
157, 183 cm
Caster wheels Type
Flat free
Size
11x4-5
Cutting height 1-6 in.
2.54-15.24 cm

Mower decks

Front anti-Scalp rollers Yes, gauge wheels
Rear anti-scalp rollers Yes, gauge wheels
Deck offset Yes
Belt tensioning Spring loaded
Construction One-piece stamped steel; 7-Iron PRO
Blade tip speed 18,000 fpm
5,486 m/min
Cutting height 1-6 in.
2.54-15.24 cm
Deck thickness 7 gauge
0.18 in.
4.6 mm
Size 60 or 72 in.
152 or 183 cm
Caster wheels Type
Flat free
Size
11x4-5

Steering

Type Hydraulic cylinder
Turns lock-to-lock 2 maximum, 1.5 minimum

Tires

Drive wheels 23x10.5-12
Steering 18x8.5-10

Travel speed

Hi forward 0-8 mph
0-12 km/h

Weight transfer

Type Optional hydraulic

Additional information

Date collected 23-Dec-2020