Specifications

Brakes

Type Internal wet disk
Individual turn brakes Standard
Master brake Standard, locking

Buyer's notes

Warranty 24 months

Dimensions

ROPS Standard (folding)
Length Less mower deck: 86.7 in.
220.2 cm
Overall height with ROPS folded 58 in.
147 cm
Shipping weight Net weight, 2WD without mower or fuel: 1,800 lb
816 kg
Net weight, 4WD without mower or fuel: 1,960 lb
889 kg
Wheelbase 49.2 in.
125 cm
Ground clearance 6.5 in.
16.5 cm
ROPS certification Two-post: OSHA 1928; Canadian Std.: CSA-352
Four-post: SAE J2194; EU Standard: 86/298/EEC; ISO 21299:2009
Overall height with ROPS 82.7 in.
210 cm
Overall width With 23x10.5 tires: 51.7 in.
131.3 cm

Drivetrain

Speed and direction control Two-pedal foot
Transmission Hydrostatic 2WD, optional full time or on demand 4WD
Cruise control Optional
Hi/Lo range No, single speed transmission

Engine

Rated engine rpm 3,000 rpm
Cylinders Three
Injection Direct
Fuel type Diesel (B20 compatible)
Cooling Liquid
Air cleaner Dual element dry type
Air restriction indicator Standard
Charging system Automotive type
Alternator, amp 75 amp
Battery 12 V
Manufacturer/model 3TNV88C
Cooling capacity 8 U.S. qt
7.6 L
Power
Gross
PS, 37.4 hp
27.5 kW
Displacement 100.2 cu in.
1.64 L
Fuel tank capacity 16 U.S. gal.
60.6 L
Maximum torque At 1,950 rpm: 80.4 lb-ft
109 Nm

Hydraulics

Type Open center
Spool valve Front lift, standard
Lift cylinders Two
Pump capacity 5.1 U.S. gpm
19.3 L/min

Key Specs

Caster wheels Flat free, 11x4-5
Engine Manufacturer/model 3TNV88C
Warranty 24 months
Transmission Hydrostatic 2WD, optional full time or on demand 4WD
Blade tip speed 18,000 fpm
5,486 m/min
Fuel tank capacity 16 U.S. gal.
60.6 L
Drive wheels 23x10.5-12
Optional 23x8.5-12
Mower deck Size 60 or 72 in.
152 or 183 cm
Speed range 0-12 mph
0-19.3 km/h
Engine Power Gross PS: 37.4 hp
27.5 kW

Mower deck (rear discharge)

Caster wheels Type
Flat free
Size
11x4-5
Cutting height 1-6 in.
2.54-15.2 cm
Cutting width 62, 72 in.
157, 183 cm

Mower decks

Belt tensioning Spring loaded
Deck offset Yes
Front anti-Scalp rollers Yes, gauge wheels
Construction One-piece stamped steel; 7-Iron PRO
Rear anti-scalp rollers Yes, gauge wheels
Cutting height 1-6 in.
2.54-15.24 cm
Deck thickness 7 gauge
0.18 in.
4.6 mm
Caster wheels Type
Flat free
Size
11x4-5
Size 60 or 72 in.
152 or 183 cm
Blade tip speed 18,000 fpm
5,486 m/min

Steering

Type Hydraulic cylinder
Turns lock-to-lock 2 maximum, 1.5 minimum

Tires

Drive wheels 23x10.5-12
Optional 23x8.5-12
Steering 2WD: 18x8.5-8
4WD: 18x8.5-10

Travel speed

4-wheel drive

Hi forward 0-12 mph
0-19.3 km/h

Weight transfer

Type Optional hydraulic

Additional information

Date collected 23-Dec-2020