Specifications

Brakes

Type Internal wet disk
Individual turn brakes Standard
Master brake Standard, locking

Buyer's notes

Warranty 24 months

Dimensions

ROPS Standard (folding)
Overall width With 23x10.5 tires: 51.7 in.
131.3 cm
Overall height with ROPS folded 58 in.
147 cm
Length Less mower deck: 86.7 in.
220.2 cm
Ground clearance 6.5 in.
16.5 cm
Overall height with ROPS 82.7 in.
210 cm
Shipping weight Net weight, 2WD without mower or fuel: 1,675 lb
760 kg
Net weight, 4WD without mower or fuel: 1,835 lb
832 kg
ROPS certification Two-post: OSHA 1928; Canadian Std.: CSA-352
Four-post: SAE J2194; EU Standard: 86/298/EEC; ISO 21299:2009
Wheelbase 49.2 in.
125 cm

Drivetrain

Transmission Hydrostatic 2WD, optional full time or on demand 4WD
Hi/Lo range No, single speed transmission
Speed and direction control Two-pedal foot
Cruise control Optional

Engine

Rated engine rpm 3,000 rpm
Cylinders Three
Injection Indirect
Fuel type Diesel (optional kit permits B20 compatibility)
Cooling Liquid
Air cleaner Dual element dry type
Air restriction indicator Standard
Charging system Automotive type
Alternator, amp 75 amp
Battery 12 V
Manufacturer/model 3TNV80F
Power Gross
PS: 25 hp
18.4 kW
Fuel tank capacity 16 U.S. gal.
60.6 L
Cooling capacity 7.5 U.S. qt
7.1 L
Displacement 77 cu in.
1.26 L
Maximum torque At 1,900 rpm: 47.2 lb-ft
64 Nm

Hydraulics

Type Open center
Spool valve Front lift, standard
Lift cylinders Two
Pump capacity 5.1 U.S. gpm
19.3 L/min

Key Specs

Warranty 24 monhts
Engine Manufacturer/model 3TNV80F
Caster wheels Flat free, 11x4-5
Transmission Hydrostatic 2WD, optional full time or on demand 4WD
Engine Power Gross PS: 25 hp
18.4 kW
Mower deck Size 60 or 72 in.
152 or 183 cm
Blade tip speed 18,000 fpm
5,486 m/min
Fuel tank capacity 16 U.S. gal.
60.6 L
Speed range 0-12 mph
0-19.3 km/h
Drive wheels 23x10.5-12
Optional: 23x8.5-12

Mower deck (rear discharge)

Cutting height 1-6 in.
2.5-15.2 cm
Cutting width 62, 72 in.
157, 183 cm
Caster wheels Type
Flat free
Size
11x4-5

Mower decks

Belt tensioning Spring loaded
Construction One-piece stamped: 7-Iron PRO
Front anti-Scalp rollers Yes, gauge wheels
Deck offset Yes
Rear anti-scalp rollers Yes, gauge wheels
Cutting height 1-6 in.
2.54-15.24 cm
Deck thickness 7 gauge
0.18 in.
4.6 mm
Blade tip speed 18,000 fpm
5,486 m/min
Caster wheels Type
Flat free
Size
11x4-5
Size 60 or 72 in.
152 or 183 cm

Steering

Type Hydraulic cylinder
Turns lock-to-lock 2 maximum, 1.5 minimum

Tires

Steering 2WD: 18x8.5-8
4WD: 18x8.5-10
Drive wheels 23x10.5-12
Optional: 23x8.5-12

Travel speed

Hi forward 0-12 mph
0-19.3 km/h
Hi reverse 0-5 mph
0-8 km/h

Weight transfer

Type Optional hydraulic

Additional information

Date collected 23-Dec-2020