Specifications

3-point hitch

Type Category 1/Category 2
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Dimensions

Wheelbase 185.5 cm
73 in.
Turning radius with brakes 2.8 m
9.19 ft
Turning radius without brakes 3 m
9.84 ft
Approximate shipping weight (open-station; cab) Open station: 1943 kg
4255 lb
Cab: Not applicable
Front axle clearance 35.1 cm
13.8 in.

Electrical

Battery size 770 CCA
Alternator (12-V) 75 amp
Starter size 2 kW
2.68 hp

Engine

Rated engine speed 2600 rpm
Cylinder liners Cast-in-block
Number of cylinders Four
Type Diesel
Injection pump type High-pressure common rail direct injection
Cooling system Liquid
Emissions compliance Final Tier 4
Air cleaner Dual element with electronic restriction indicator
Aspiration Turbocharged
Engine model 4TNV86CT-MJT
Compression ratio 19.1:1
Lubrication Pressurized
Cylinders/displacement 4 cylinders
2.091 L
127.6 cu in.
Manufacturer Yanmar®
Engine power (gross) 37.9 kW
51.5 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power eHydro™ transmission: 30.5 kW
40.9 hp
Per SAE J1995
Family EYDXL2.09TDA
FYDXL2.09TDA
GYDXL2.09TDA
Fuel tank capacity 56.9 L
15 U.S. gal.
Engine torque at rated speed 139 Nm
102.5 lb-ft
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.

Final drive

Type Planetary
Differential lock Yes

Fluid capacities

Crankcase with filter 5.3 L
1.4 qt
Transmission and hydraulic system 47.3 L
12.5 gal.

Fuel system

Type High pressure common rail direct injection
Fuel consumption

Hydraulics

Remote control valves available Two remotes standard
Draft control sensing Position control
Pump type Single gear
Type Open center
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2 gpm

Key Specs

Hitch type Category 1/Category 2
Standard transmission; forward/reverse eHydro transmission
Cruise control Standard
Approximate shipping weight (open-station; cab) Open station: 1943 kg
4255 lb
Cab: Not applicable
Power take-off (PTO) power eHydro™ transmission: 30.5 kW
40.9 hp
Per SAE J1995
Implement hydraulics 42.3 L/min
11.2 gpm
Wheelbase 185.5 cm
73 in.
Steering hydraulics 23.5 L/min
6.2 gpm
Engine power (gross) 37.9 kW
51.5 hp
PS at 2600 rpm
SAE J1995 rated power
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Operator station

Platform - flat/straddle Flat
Rollover protective structure Type
Foldable
Yes

Power take-off (PTO)

Control Independent
Standard Independent 540 rpm at 2600 rpm
Optional 540E rpm
Clutch Wet disc

Tires

Front R4 Industrial 31.5x13-16.5
Rear R4 Industrial 16.9-24
R4 Industrial 19.5L-24
Rear tread spacing 1375 mm
54.1 in.
1495 mm
58.9 in.
Front tread range 1374.6 mm
54.1 in.

Transmission

Brakes Multi-plate wet disc
Clutch, wet/dry Wet
Transmission gear ranges eHydro - Infinitely-variable three range
Final drive Planetary
Differential lock Yes
Steering Hydrostatic power steering
Standard transmission; forward/reverse eHydro transmission
Cruise control Standard
Axle capacity Front
1600 kg
3528 lb
Rear
2400 kg
5292 lb
Creeper SpeedMatch™ standard
Clutch disk diameter wet clutch 129 mm
5.08 in.