Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb

Cab

Visibility 360 degree (angle)
Doors Two
Noise rating 80 dBA
Seat equipment Scissor-link
Compliance Complies with OSHA, SAE, and CSA standards for rollover protection

Dimensions

Wheelbase 1727 mm
68 in.
Front axle clearance Minimum: 171 mm
6.7 in.
Maximum: 299 mm
11.8 in.
Turning radius with brakes 2.7 m
8.8 ft
Approximate shipping weight (open-station; cab) OOS: 1391 kg
3066 lb
Cab: 1818 kg
4008 lb
Turning radius without brakes 2.8 m
9.2 ft

Electrical

Battery size 500 CCA
Alternator (12-V) 75 amp
Starter size 1.4 kW
1.9 hp

Engine

Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Emissions compliance Final Tier 4
Number of cylinders Three
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Engine model 3TNV86CHT-MJTV
Aspiration Turbocharged and intercooled
Air cleaner Dual element
Cooling system Liquid
Cylinders/displacement Three cylinders: 1.57 L
95.7 cu in.
Engine power (gross) SAE J1995 rated power: 33.3 kW
44.7 hp
45.3 PS
Manufacturer Yanmar®
Engine torque at rated speed 112.3 Nm
90 lb-ft
Fuel tank capacity OOS: 37.4 L
10 U.S. gal.
Cab only: 47.6 L
12.6 U.S. gal.
Power take-off (PTO) power Per SAE J1995: 25.3 kW
33.9 hp
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.

Final drive

Type Spur gear

Fluid capacities

Transmission and hydraulic system 26.5 L
7 U.S. gal.
Crankcase with filter 5.7 L
6 qt

Fuel system

Type High pressure common rail direct injection
Fuel consumption

Hydraulics

Type Open center
Draft control sensing Position control
Pump type Single gear
Remote control valves available Up to six rear remotes
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
34.3 L/min
9.1 gpm
57.8 L/min
15.3 gpm
Maximum operating pressure 172 bar
2495 psi

Key Specs

Hitch type Category 1
Cruise control Standard
Standard transmission; forward/reverse eHydro transmission
Lift capacity, 24-in. behind link arms 995 kg
2194 lb
Implement hydraulics 34.3 L/min
9.1 gpm
Steering hydraulics 23.5 L/min
6.2 gpm
Engine power (gross) SAE J1995 rated power: 33.3 kW
44.7 hp
45.3 PS
Power take-off (PTO) power Per SAE J1995: 25.3 kW
33.9 hp
Approximate shipping weight (open-station; cab) Open operator station (OOS): 1391 kg
3066 lb
Cab: 1818 kg
4008 lb
Wheelbase 1727 mm
68 in.

Operator station

Platform - flat/straddle One-piece semi flat
Rollover protective structure Type
Foldable

Power take-off (PTO)

Clutch Wet disk
Optional Mid: 2100 rpm
Control Lever and switch
Brake (for mid and rear PTO) Wet disk
Standard Independent rear: 540 rpm

Tires

Front R1 Bar: 7-14
R3 Turf : 27x8.50-15
R3 Turf Special: 25/10.5LLx15
R4 Industrial: 25x8.5-14 or 27x8.5-15
Front tread range 1117 mm
44 in.
Rear R1 Bar: 11.2-24
R3 Turf: 41x14-20
R3 Turf Special: 41x18LL-16.1
R4 Industrial: 15-19.5 or 43x16-20
Rear tread spacing 1031 mm
40.6 in.

Transmission

Steering Hydrostatic power steering
Cruise control Standard
Standard transmission; forward/reverse eHydro transmission
Transmission gear ranges Three-range, infinitely variable
Final drive Spur gear
Brakes Wet disk
Axle capacity Front
1450 kg
3197 lb
Rear
1850 kg
4079 lb