Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 944 kg
2081.2 lb

Dimensions

Turning radius with brakes 1.63 m
5.3 ft
Wheelbase 1574 mm
62 in.
Approximate shipping weight (open-station; cab) OOS: 1275 kg
2811 lb
Cab: Not applicable
Front axle clearance Minimum: 331 mm
13 in.
Maximum: 353 mm
13.9 in.

Electrical

Battery size 600 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp

Engine

Aspiration Natural
Air cleaner Dual element
Injection pump type High pressure common rail direct injection
Cylinders/displacement 3 / 1.64 L
3 / 100.2 cu in.
Number of cylinders Three
Fuel tank capacity 36.7 L
9.7 U.S. gal.
Cylinder liners Cast-in-block
Lubrication Pressurized
Emissions compliance Final Tier 4
Compression ratio 19.1:1
Bore and stroke 88 x 90 mm
3.46 x 3.54 in.
Engine model 3TNV88C-KJPT
Engine torque at rated speed 87 Nm
64.2 lb-ft
Rated engine speed 2800 rpm
Cooling system Liquid
Engine power (gross) 25.5 kW
34.2 hp
Power take-off (PTO) power 22.7 kW
30.4 hp
Manufacturer Yanmar®

Final drive

Type Spur gear

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt
Transmission and hydraulic system 33 L
34.8 qt

Fuel system

Fuel consumption
Type High pressure common rail direct injection

Hydraulics

Draft control sensing Position control
Type Open center
Remote control valves available Up to two (optional)
Pump rated output Steering
16.8 L/min
4.4 gpm
Implement
22.4 L/min
5.9 gpm
39.2 L/min
10.3 gpm
Pump type Single gear
Maximum operating pressure 172 bar
2495 psi

Key Specs

Steering hydraulics 16.8 L/min
4.4 gpm
Cruise control No
Hitch type Category 1
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Implement hydraulics 22.4 L/min
5.9 gpm
Lift capacity, 24-in. behind link arms 944 kg
2081.2 lb
Engine power (gross) 25.5 kW
34.2 hp
Power take-off (PTO) power 22.7 kW
30.4 hp
Wheelbase 1574 mm
62 in.
Approximate shipping weight (open-station; cab) Open operator station (OOS): 1275 kg
2811 lb
Cab: Not applicable

Miscellaneous

Toolbox Yes
12-V Outlet No
Tilt steering wheel No

Operator station

Rollover protective structure Type
Foldable
ASABE S478
Gear shift location - console/floor Right-hand side
Platform - flat/straddle Straddle

Power take-off (PTO)

Control Mechanical
Clutch Transmission
Brake (for mid and rear PTO) Wet disk
Standard At 2400 rpm: 540 rpm

Tires

Rear R1 Bar: 11.2-24
R3 Turf: 41x14-20
R4 Industrial: 15-19.5
Front R1 Bar: 7-14
R3 Turf: 27x8.5-15
R4 Industrial: 25x8.5-14

Transmission

Axle capacity Front
880 kg
1940 lb
Rear
1600 kg
3527 lb
Creeper No
Final drive Spur Gear
Left-hand reverser Yes
Differential lock Yes
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Cruise control No
Steering Power steering
Brakes Wet disk
Transmission gear ranges Four gears and two ranges