Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 944 kg
2081.2 lb

Dimensions

Turning radius with brakes 1.63 m
5.3 ft
Front axle clearance Minimum: 331 mm
13 in.
Maximum: 353 mm
13.9 in.
Wheelbase 1574 mm
62 in.
Approximate shipping weight (open-station; cab) OOS: 1260 kg
2778 lb
Cab: Not applicable

Electrical

Battery size 600 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp

Engine

Aspiration Natural
Cylinders/displacement 3 / 1.64 L
3 / 100.2 cu in.
Number of cylinders Three
Engine torque at rated speed 72.4 Nm
53.4 lb-ft
Fuel tank capacity 36.7 L
9.7 U.S. gal.
Cylinder liners Cast-in-block
Lubrication Pressurized
Air cleaner Dual element
Engine power (gross) 18.2 kW
24.4 hp
Compression ratio 19.1:1
Bore and stroke 88 x 90 mm
3.46 x 3.54 in.
Injection pump type Direct injection
Engine model 3TNV88F-EPJPT
Emissions compliance Final Tier 4
Rated engine speed 2400 rpm
Cooling system Liquid
Manufacturer Yanmar®
Power take-off (PTO) power 15.4 kW
20.7 hp

Final drive

Type Spur gear

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt
Transmission and hydraulic system 33 L
34.8 qt

Fuel system

Fuel consumption
Type Direct injection

Hydraulics

Type Open center
Remote control valves available Up to two (optional)
Pump rated output Steering
14.4 L/min
3.8 gpm
Implement
19.2 L/min
5.1 gpm
33.6 L/min
8.9 gpm
Pump type Single gear
Draft control sensing Position control
Maximum operating pressure 172 bar
2495 psi

Key Specs

Steering hydraulics 14.4 L/min
3.8 gpm
Cruise control No
Hitch type Category 1
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Implement hydraulics 19.2 L/min
5.1 gpm
Approximate shipping weight (open-station; cab) Open operator station (OOS): 1260 kg
2778 lb
Cab: Not applicable
Engine power (gross) 18.2 kW
24.4 hp
Lift capacity, 24-in. behind link arms 944 kg
2081.2 lb
Wheelbase 1574 mm
62 in.
Power take-off (PTO) power 15.4 kW
20.7 hp

Miscellaneous

Toolbox Yes
12-V Outlet No
Tilt steering wheel No

Operator station

Rollover protective structure Type
Foldable
ASABE S478
Gear shift location - console/floor Right-hand side
Platform - flat/straddle Straddle

Power take-off (PTO)

Control Mechanical
Clutch Transmission
Brake (for mid and rear PTO) Wet disk
Standard At 2400 rpm: 540 rpm

Tires

Front R1 Bar: 7-14
R3 Turf: 27x8.5-15
R4 Industrial: 25x8.5-14
Rear R1 Bar: 11.2-24
R3 Turf: 41x14-20
R4 Industrial: 15-19.5

Transmission

Axle capacity Front
880 kg
1940 lb
Rear
1600 kg
3527 lb
Creeper No
Final drive Spur Gear
Left-hand reverser Yes
Differential lock Yes
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Cruise control No
Steering Power steering
Transmission gear ranges Four gears and two ranges
Brakes Wet disk