Specifications

Capacities

Fuel tank 727 L
192 U.S. gal.
Cooling system

40.3 L
10.6 U.S. gal.
Transmission-hydraulic system MFWD: 140 L
37 U.S. gal.
ILS: 165 L
43.6 U.S. gal.
Crankcase oil volume 1300 MFWD: 25 L
6.6 U.S. gal.
1500 MFWD: 28 L
7.4 U.S. gal.
ILS: 27.5 L
7.3 U.S. gal.
Diesel exhaust fluid (DEF) tank 37.2 L
9.8 U.S. gal.

Dimensions

Drawbar clearance 376 mm
14.8 in.
Wheelbase MFWD: 3,080 mm
121.3 in.
ILS: 3,050 mm
120.1 in.
Overall length 6,636 mm
261.3 in.
Front axle center MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.

Drawbar

Drawbar category Standard: Category 3
Optional: Category 4
Category 4 with heavy-duty support
Maximum vertical load Dependent on drawbar position: 1837 to 2700 kg
4050 to 6000 lb
Optional: 2,245 kg
4,950 lb
4,990 kg
11,000 lb

Electrical system

Total cold cranking amps 1,850 CCA
Alternator size Standard: 200 amp
Optional: 330 amp
Type of bulb in beacon (Halogen, Zenon, LED)
Battery options 12 V
Working lights Standard: 18 halogen
Available: 18 LED
22 LED
Type of bulb in headlight (Halogen, Zenon, LED)
Standard: halogen, 65 W
Available: LED

Engine performance

Rated power ECE-R120: 184 kW
250 hp
Maximum engine power ECE-R120: 202 kW
275 hp
Engine peak torque At 1600 rpm: 1171 Nm
863 lb-ft
Rated PTO power (hp SAE) 149 kW
200 hp
Power boost 10 percent
PTO torque rise 40 percent

Engine specifications

After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Description John Deere PowerTech™ PVS 9.0 L (B20 diesel compatible)
Rated speed 2100 rpm
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Emission level Final Tier 4
Engine family JJDXL09.0308
Cylinders liners Wet-sleeve
Displacement 9 L
549 cu in.
Aspiration Single, variable geometry turbo; air-to-air aftercooling and cooled exhaust gas recirculation

Front axle

Front axle differential lock 1300 Series MFWD: Limited Slip
1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic
Type Standard: 1300 Series MFWD
Optional: 1500 Series MFWD
ILS

Front hitch

Standard lift capacity Category 3N ground-engaging front hitch: 5200 kg
11,464 lb
PTO speed 1,000 PTO rpm at 2000 engine rpm
Category Category 3N
Front power take-off (PTO) 44 mm (1.75 in.) 20 spline, 1000 rpm
35 mm (1.375 in.) 21 spline, 1000 rpm
35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)

Hydraulic system

Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321 L/min
85 gpm
SCV control Electronic
Available flow at front SCVs 96 L/min
25 gpm
Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 5
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 2
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm
Type Closed-center, pressure/flow compensated system with load sensing

Key Specs

Engine displacement 9 L
549 cu in.
Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h (24.9 mph)
Optional: 16-speed PowerShift 40 km/h (24.9 mph)
e23 PowerShift with Efficiency Manager 50K, 50 km/h (31 mph)
John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h (0.03-26 mph)
John Deere AutoPowr IVT 50K, 0.05-50 km/h (0.03-31 mph)
Rated PTO power (hp SAE) 149 kW
200 hp
Rear hitch category (SAE designation) Standard: Category 3/3N standard lift at 610 mm (24 in.) behind hitchpoint: 6350
14,000 lb
Optional: Category 3/3N at 610 mm (24 in.) behind hitchpoint: 8391 kg
18,500 lb
Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb
Engine description John Deere PowerTech™ PVS 9.0 L (B20 diesel compatible)
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321 L/min
85 gpm
Base machine weight MFWD/PowerShift: 11,700 kg
25,800 lb
ILS™/e23: 12,700 kg
28,000 lb
Maximum engine power ECE-R120: 202 kW
275 hp
Rated engine power ECE-R120: 184 kW
250 hp

Loaders

Maximum lift height 4735 mm
186 in.
Loader H480
Lift capacity at full height 2,486 kg
5469 lb
measured at 800 mm (31.5 in.) ahead of pivot

Miscellaneous

Country of manufacture USA

Operator station

Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II
Inner cab volume 3.24 m3
114 cu ft
Cab suspension Optional
Rollover protective structure, OOS

Display Standard: Generation 4 4100 CommandCenter™ with 17.8-cm (7-in.) display
Optional: Generation 4 4600 CommandCenter with 25.4-cm (10-in.) display
Cab glass area 6.52 m2
70.18 sq ft
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Instructional seat Standard

Precision AG

Telematic Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnostics Available with activated JDLink hardware and activations
Guidance Integrated AutoTrac™

Rear axle

Final drive type Inboard planetary three pinion
Type Standard: Rack-and-pinion, double flat, or flange axles
Optional: Long, single taper hub: Diameter: 110 x 3010 mm
4.33 x 118.5 in.
Long, dual taper hub: Diameter: 110 x 3010 mm
Long, dual taper hub: Diameter: 120 x 3010 mm
4.72 x 118.5 in.
Short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Rear differential lock Full-locking electrohydraulic

Rear hitch

Rear axle differential lock Electrohydraulic
Sensing type Electrohydraulic
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb
Hitch category (SAE designation) Standard: Category 3/3N standard lift at 610 mm (24 in.) behind hitchpoint: 6350 kg
14,000 lb
Optional: Category 3/3N at 610 mm (24 in.) behind hitchpoint: 8391 kg
18,500 lb
Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb

Rear power take-off (PTO)

Engine rpm (at rated PTO speeds) 16-speed PowerShift: 1,000 PTO rpm at 2,003 engine rpm, 1,000 ECO PTO rpm at 1,596 engine rpm, 540 PTO rpm at 1,817 engine rpm
IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm
e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
PTO actuation Electrohydraulic with adjustable modulation

Serviceability

Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine oil change 500 hours
Interval for engine coolant change 6,000 hours

Steering

Type Standard: Hydrostatic power-steering with electric pump back-up

Tires

Turning radius without brakes 1300 Series with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 5.4 m
17.7 ft
ILS with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 5.42 m
17.8 ft
Wheel tread range 1300 Series MFWD: 1524-2235 mm
60-88 in.
1500 Series MFWD: 1524-3657 mm
60-144 in.
ILS: 1524-3657 mm

Transmission

Type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph
Optional: 16-speed PowerShift 40 km/h
e23 PowerShift with Efficiency Manager 50K, 50 km/h
31 mph
John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h (0.03-26 mph)
John Deere AutoPowr IVT 50K, 0.05-50 km/h (0.03-31 mph)

Weight

Base machine weight

MFWD/PowerShift: 11,700 kg
25,800 lb
ILS™/e23: 12,700 kg
28,000 lb
Maximum permissible weight 20,000 kg
44,100 lb
Maximum ballast level 20,000 kg
44,100 lb

Additional information

Date collected 23-Jan-20