Specifications

Capacities

Cooling system 28 L
7.4 U.S. gal.
Crankcase oil volume 16 L
4.2 U.S. gal.
Transmission-hydraulic system IVT: 60 L
15.9 U.S. gal.
AutoQuad: 53 L
14 U.S. gal.
Diesel exhaust fluid (DEF) tank 13 L
3.4 U.S. gal.
Fuel tank 195 L
51.5 U.S. gal.

Dimensions

Overall width 1680 mm
66.1 in.
Front axle center 481 mm
18.9 in.
Wheelbase MFWD: 2580 mm
102 in.
Overall length 4533 mm
178.5 in.
Overall height 2861 mm
112.6 in.
Approximate shipping weight, Open;Cab 6000 kg
13,228 lb

Drawbar

Drawbar category Category 2
Maximum vertical load Category 2: 1400-2450 kg
3085-5400 lb
Maximum vertical load dependent on drawbar position

Electrical system

Battery options 12 V
Total cold cranking amps 1200 CCA
Alternator size Standard: 120 amp
Optional: 250 amp
Type of bulb in headlight (Halogen, Zenon, LED) Standard: 65-W halogen W
Optional: LED
Working lights Standard: 14 halogen
Available: 12 LED plus two halogen

Engine performance

Intelligent Power Management (IPM) Transport and/or mobile PTO applications
Additional engine power (hp ISO) at 2100 rpm: 14.9 kW 20 hp
Engine peak torque At 1600 rpm: 515 Nm
380 lb-ft
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) 97/68EC: 81 kW
110 hp
Power boost 10 percent
Rated PTO power (hp SAE) 62 kW
83 hp
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) 97/68EC: 89 kW
119 hp
PTO torque rise 40 percent

Engine specifications

After treatment type DOC/DPF/SCR
Description John Deere PowerTech™ PSS
Aspiration Turbocharged, fixed geometry first stage-variable geometry second stage, air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
Engine type Diesel, in-line, 4-cylinder, wet-sleeve cylinder liners with four valves in head
Engine family NJDXL06.8324
Rated speed 2100 rpm
Displacement 4.5 L
275 cu in.

Front axle

Front axle differential lock MFWD: Limited slip
TLS: Limited slip
TLS with brakes: Full-locking electrohydraulic

Front hitch

Standard lift capacity At hook ends: 3300 kg
7275 lb
Electric power Seven-pin electrical socket
Optional: Three-pin and ISOBUS socket
PTO speed Engine at PTO speed (1000): 1969 rpm
Category Category 3N
Front power take-off (PTO) 1000 rpm, clockwise rotation (from driving position)

Hydraulic system

Pump rated output Standard: 45 cc pump: 114 L/min
30 gpm
Joystick SCV control Available
Available flow at a single rear SCV 100 L/min
26 gpm
Type Closed-center, pressure-and-flow compensated
SCV control Standard: Mechanical
Optional: Electronic
Number of mid selective control valves (SCVs) Up to three
Number of rear selective control valves (SCVs) Standard: Three ISO couplers
Optional: Three to five ISO couplers

Key Specs

Engine displacement 4.5 L
275 cu in.
Base machine weight 6000 kg
13,228 lb
Engine description John Deere PowerTech™ PSS
Rated PTO power (hp SAE) 62 kW
83 hp
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) 97/68EC: 89 kW
119 hp
Hydraulic pump rated output Standard: 45 cc pump: 114 L/min
30 gpm
Rear hitch category (SAE designation) Standard: Category 2/3N: 3600 kg
7937 lb
Optional: Category 2/3N: 4100 kg
9039 lb
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) 97/68EC: 81 kW
110 hp

Loaders

Maximum lift height 620R: 4124 mm
162 in.
640R: 4151 mm
163 in.
Loader 620R
640R
Lift capacity at full height 620R: 2577 kg
5861 lb
640R: 2181 kg
4808 lb

Miscellaneous

Country of manufacture Germany

Operator station

Cab glass area 6.11 m2
65.77 sq ft
Instructional seat Standard
Inner cab volume 3.33 m3
117.59 cu ft
Seat Degree of seat swivel, left hand
CommandARM: 7.5 degree
Degree of seat swivel, right hand
CommandARM: 30 degree
Standard: Air suspension
Optional: Deluxe air suspension
dB(A) rating 71 dB
Radio Optional
Cab suspension Optional: Adaptive Hydraulic Cab Suspension Plus (HCS Plus)

Rear axle

Type Standard: Flange, 1552 mm
61 in.
Optional: Rack and pinion, 2550 mm
100.4 in.
Rack and pinion, 2438 mm
96 in.
Final drive type Inboard planetary three pinion
Differential controls Full-locking electrohydraulic

Rear hitch

Hitch category (SAE designation) Standard: Category 2/3N: 3600 kg
7937 lb
Optional: Category 2/3N: 4100 kg
9039 lb
Sensing type Electrohydraulic
Remote control valves available Available: Remote control switch
Rear axle differential lock Electrohydraulic
Maximum lift capacity behind lift points 4100 kg
9039 lb

Rear power take-off (PTO)

Type Independent
Standard: 540, 540E, 1000 rpm reversible shaft: 35 mm
1.375 in.
Engine rpm (at rated PTO speeds) 1967 engine rpm at 540 rpm PTO
1496 engine rpm at 540E rpm PTO
1962 engine rpm at 1000 rpm PTO
PTO actuation Electrical modulation

Serviceability

Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine oil change 500 hours
Interval for engine coolant change 6,000 hours

Steering

Type Hydrostatic power

Tires

Rear 420/85R30 (16.9R-30)
Wheel tread range MFWD: 1524-2235 mm 60-88 in.
TLS: 1524-2235 mm 60-88 in.

Transmission

Type Standard: IVT, 0.05-42 km/h 0.03-26 mph
Optional: IVT, 0.05-50 km/h 0.03-31 mph
24-speed AutoQuad PLUS ECO (40K)
24-speed AutoQuad PLUS ECO (50K)
Reverser Left-hand electrical reverser
Creeper Available with AutoQuad

Weight

Maximum permissible weight 8950 kg
19,731 lb
Base machine weight Front axle
2400 kg
5291 lb
Rear axle
3600 kg
7936 lb
Total
TLS, AutoQuad, 600/65R38, 540/65R24, shipping fuel, front weight support: 5470 kg
12,059 lb
TLS, IVT, 600/65R38, 540/65R24, shipping fuel, front weight support: 6091 kg
13,428 lb
6000 kg
13,228 lb

Additional information

Date collected 12-Nov-21