Specifications

Capacities

Cooling system 20 L
5.3 U.S. gal.
Diesel exhaust fluid (DEF) tank 19 L
5 U.S. gal.
Fuel tank 175 L
46.2 U.S. gal.
Crankcase oil volume 17 L
4.5 U.S. gal.
Transmission-hydraulic system PowrQuad Plus/AutoQuad Plus: 60 L
15.9 U.S. gal.

Dimensions

Overall length 4377 mm
172.3 in.
Front axle center Ground clearance: Minimum.: 364 mm
14.3 in.
Maximum: 559 mm
22 in.
Overall width Minimum: 2000 mm (420/85R30 (148)) 78.74 in.
Maximum: 2550 mm (600/65R38 (175)) 100.39 in.
Approximate shipping weight, Open;Cab Cab: 5680 kg
12,522 lb
Overall height 2940 mm
115.75 in.
Wheelbase 2400 mm
94.5 in.

Drawbar

Drawbar category Category 2
Maximum vertical load Road/field use (250-mm extended): 2000 kg
4409.2 lb
Field use (350-mm extended): 1400 kg
3086.5 lb
Field use (400-mm extended): 1200 kg
2645.5 lb

Electrical system

Alternator size Standard: 14 V/120 amp
Optional: 14 V/150 amp
14 V/200 amp
Battery options Standard: 12 V/154 amp-hr
Optional: 12 V/174 amp-hr

Engine performance

PTO torque rise 40 percent
Power boost 10 percent
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) 98 kW
133 hp
w/ IPM: 106 kW
144 hp
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) 88 kW
120 hp
w/ IPM: 103 kW
140 hp
Rated PTO power (hp SAE) 69 kW
94 hp
Engine peak torque At 1600 U/min: 562 Nm
414.5 lb-ft
Maximum PTO power At 1000 PTO rpm with IPM: 87 kW
118 hp

Engine specifications

Engine family JDXL04.5317
Rated speed 2100 rpm
Engine type 4045HL290
Description John Deere PowerTech EWL
Aspiration Single turbocharger with wastegate
Emission level Final Tier 4
After treatment type Diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) using diesel exhaust fluid (DEF)
Displacement 4.5 L
275 cu in.

Front axle

Front axle differential lock Self-locking differential
Type Standard: MFWD
Optional: Two-wheel drive (2WD)
Triple-Link Suspension (TLS) MFWD axle (hydro-pneumatic, permanently active, triple link, self-leveling suspension with 100-mm [3.9-in.] suspension range)
Triple-Link Suspension MFWD with brakes

Front hitch

Electric power Seven-pin electrical socket
PTO speed 1000 PTO: 1969 rpm
Category 3N
Front power take-off (PTO) Electrohydraulically engaged with oil-cooled, multi-disc design
Standard lift capacity 4400 kg
9700.3 lb

Hydraulic system

Joystick SCV control Mechanical/electrical
Number of mid selective control valves (SCVs) Up to three
Type Standard: Pressure compensated (PC)
Optional: Pressure-and-flow compensated (PFC) system with Load Sensing function
Number of rear selective control valves (SCVs) Standard: Two ISO couplers
Optional: Two to four ISO couplers
Pump rated output Standard: 35-cc pump: 80 L/min
21 gpm
Optional: 45-cc pump: 114 L/min
30 gpm

Key Specs

Rear hitch category (SAE designation) 2/3N
Base machine weight 5680 kg
12,522 lb
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) 98 kW
133 hp
w/ IPM: 106 kW
144 hp
Rated PTO power (hp SAE) 69 kW
94 hp
Transmission type Standard: John Deere 24-speed PowrQuad™ Plus 40 km/h
Optional: John Deere 16-speed PowrQuad Plus 30 km/h
John Deere 24-speed AutoQuad™ Plus 40 km/h
John Deere 24-speed CommandQuad™ Plus 40 km/h
AutoPowr™/IVT™ 40 km/h
Creeper (PowrQuad Plus and AutoQuad Plus)
Maximum PTO power At 1000 PTO rpm with IPM: 87 kW
118 hp
Engine displacement 4.5 L
275 cu in.
Hydraulic pump rated output Standard: 35-cc pump: 80 L/min
21 gpm
Optional: 45 cc-pump: 114 L/min
30 gpm
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) 88 kW
120 hp
w/ IPM: 103 kW
140 hp
Engine description John Deere PowerTech™ EWL

Loaders

Loader 600R
Lift capacity at full height Non-self-leveling (NSL): 2347 kg
5174.24 lb
Mechanical self-leveling (MSL): 1898 kg
4184.37 lb
Maximum lift height NSL/MSL: 3.9 m
153.56 in.

Miscellaneous

Country of manufacture Germany

Operator station

Radio Optional integrated
dB(A) rating 70 dBA
Cab suspension Optional: Mechanical Cab Suspension (MCS)
Instructional seat Optional
Seat Standard: Economy seat with mechanical suspension
Optional: Standard seat with air suspension
Inner cab volume 2.73 m3
96.41 cu ft
Cab glass area Without roof hatch or panoramic roof: 4.85 m2
52.2 sq ft
Rollover protective structure, OOS Gearshift location - console/floor
Console
Display Cornerpost display (right-hand A-post)
Functionalty: Performance monitor and individual settings

Precision AG

Remote diagnostics Optional: JDLink
Telematic Optional: JDLink™
Guidance Optional: AutoTrac™ on cornerpost display (straight track only), AutoTrac with 4240/4640 Universal Display

Rear axle

Final drive type Three planetary gear reduction
Rear differential lock Electrohydraulically with oil-cooled clutch
Brakes, type and control Primary brake (footbrake): Oil-cooled self-equalizing, self-adjusting, hydraulically actuated
Secondary brake: Hydraulically actuated, integrated into primary brake (lever on left-hand side of operator seat)
Park lock: Mechanical transmission park lock
Mechanical front-wheel drive (MFWD) braking: Automatic MFWD engagement (MFWD engaged for braking at speeds less than 5 km/h [3.1 mph])
Front axle brakes (optional): TLS™ with front axle brakes (oil cooled, self-equalizing, self-adjusting, hydraulically actuated)
Type Standard: Flange-type rear axle
Optional: Rack-and-pinion rear axle - 79-mm (3.1-in.) shaft (2.556-m/8.4-ft length)
Rack-and-pinion rear axle - 79-mm (3.1-in.) shaft - short version (2.286-m/7.5-ft length) mm

Rear hitch

Remote control valves available Standard
Rear axle differential lock Electrohydraulically with oil-cooled clutch
Hitch category (SAE designation) 2/3N
Sensing type Electronic lower link
Maximum lift capacity behind lift points Standard: 3750 kg
8267.3 lb
Optional: 5000 kg
11,023.1 lb

Rear power take-off (PTO)

PTO actuation In-cab switch and external fender-mounted remote control
Engine rpm (at rated PTO speeds) 540: 1977 rpm
1000: 1972 rpm
Type Electrohydraulically operated, oil-cooled, multi-disc design
Standard: 38 mm (1.496 in.) 540, 1000 reversible shaft

Serviceability

Interval for engine coolant change 6000 hours
Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1500 hours

Steering

Type Dynamic load sensing, hydrostatic, flow metering

Tires

Rear 600/65R38 (175)

Transmission

Creeper Optional
Reverser Electronic left-hand reverser
Type Standard: John Deere 24-speed PowrQuad Plus 40 km/h
Optional: John Deere 16-speed PowrQuad Plus 30 km/h
John Deere 24-speed AutoQuad Plus 40 km/h
John Deere 24-speed CommandQuad Plus 40 km/h
AutoPowr/IVT 40 km/h
Creeper (PowrQuad Plus and AutoQuad Plus)

Weight

Base machine weight Front axle
2180 kg
4806 lb
Rear axle
3500 kg
7716 lb
5680 kg
12,522 lb
Maximum permissible weight 9500 kg
20,944 lb

Additional information

Date collected 19-Mar-20