Specifications

Capacities

Crankcase oil volume 15 L
4 U.S. gal.
Fuel tank 168 L
44.4 U.S. gal.
Cooling system Open station: 18.6 L
4.7 U.S. gal.
Cab: 19.1 L
5 U.S. gal.
Transmission-hydraulic system 58 L
15.3 U.S. gal.

Dimensions

Wheelbase 2WD: 2456 mm
96.7 in.
MFWD: 2450 mm
96.5 in.
Approximate shipping weight, Open;Cab 2WD Open: 4064 kg
8960 lb
MFWD: Open: 4268 kg
9410 lb
Cab: 4645 kg
10,240 lb

Drawbar

Drawbar category Standard: Category 2
Optional: Category 2 heavy duty
Maximum vertical load Standard: Category 2 1000-1250 kg
2205-2756 lb
Optional: Category 2 heavy-duty: 1200-1900 kg
2645-4189 lb
Maximum vertical load dependent on drawbar position

Electrical system

Battery options 12 V
Total cold cranking amps 925 CCA
Alternator size 90 amp

Engine performance

PTO torque rise 30 percent
Engine peak torque At 1,600 rpm: 494 Nm
364 lb-ft
Rated PTO power (hp SAE) 76 kW
102 PTO hp
Rated power 97/68EC: 88 kW
120 engine hp

Engine specifications

After treatment type DOC/DPF/SCR
Engine type Diesel, in-line, 4-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Emission level Final Tier 4
Rated speed 2200 rpm
Engine family HJDXL04.5315
Aspiration Turbocharge, wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Displacement 4.5 L
275 cu in.
Description John Deere PowerTech™ PWL (B20 Diesel Compatible)

Front axle

Type Standard: MFWD
Optional: 2WD
Front axle differential lock 2WD: None
MFWD: limited slip

Hydraulic system

SCV control Mechanical
Pump rated output 36.5 cc pump: 75.7 L/min
20 gpm
Number of rear selective control valves (SCVs) Standard: ISO Couplers: 2
Optional: ISO Couplers 3
Available flow at a single rear SCV 75.7 L/min
20 gpm
Type Open-center
Gear Driven

Key Specs

Engine displacement 4.5 L
275 cu in.
Rated engine power 97/68EC: 88 kW
120 engine hp
Transmission type Standard: John Deere 12F/12R PowrReverser™ Transmission: 30 km/h
19 mph
Optional: John Deere 24F/12R PowrReverser Transmission: 40 km/h
25 mph
Rear hitch category (SAE designation) Standard: Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 2: 3318 kg (7300) heavy duty lift at 610 mm behind hitchpoint
Rated PTO power (hp SAE) 76 kW
102 PTO hp
Hydraulic pump rated output 36.5 cc pump: 75.7 L/min
20 gpm
Engine description John Deere PowerTech™ PWL (B20 Diesel Compatible)

Miscellaneous

Country of manufacture Mexico

Operator station

Instructional seat Optional
Display LCD instrument cluster
Seat Standard: Mechanical suspension cloth seat
Optional: Air suspension

Rear axle

Type Flange
Final drive type Inboard planetary
Rear differential lock Full-locking mechanical

Rear hitch

Sensing type Optional
Maximum lift capacity behind lift points Standard: Category 2 with heavy duty lift: 3318 kg
7300 lb
Hitch category (SAE designation) Standard: Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 2: 3318 kg (7300) heavy duty lift at 610 mm behind hitchpoint

Rear power take-off (PTO)

Engine rpm (at rated PTO speeds) 2085 engine rpm at 540 rpm PTO
2067 engine rpm at 1000 rpm PTO
Type Independent
35 mm (1.375 in.) 540 rpm/1000 rpm reversible shaft

Serviceability

Interval for hydraulic/transmission oil change 1,000 hours
Interval for engine coolant change 5,000 hours
Interval for engine oil change 500 hours

Steering

Type Standard: Hydrostatic power

Tires

Wheel tread range 2WD: 1533-2043 mm
60.4-80.4 in.
MFWD: 1516-2016 mm
59.7-79.4 in.

Transmission

Type Standard: John Deere 12F/12R PowrReverser™ Transmission: 30 km/h
19 mph
Optional: John Deere 24F/12R PowrReverser Transmission: 40 km/h
25 mph

Weight

Maximum ballast level 6464 kg
14,250 lb

Additional information

Date collected 9-Feb-17