Specifications

Capacities

Fuel tank 927 L
245 U.S. gal.
Diesel exhaust fluid (DEF) tank 37.2 L
9.8 U.S. gal.
Transmission-hydraulic system 1930-mm and 2032-mm (76-in. and 80-in.) tread: 250 L
66.1 U.S. gal.
2235-mm and 3048-mm (88-in. and 120-in.) tread: 260.6 L
68.8 U.S. gal.
Cooling system 42.3 L
11.2 U.S. gal.
Crankcase oil volume 26.6 L
7 U.S. gal.

Dimensions

Wheelbase 3235 mm
127.36 in.

Drawbar

Drawbar category Standard: Category 4
Optional: Category 4 with heavy-duty support
Maximum vertical load Standard: 2245 kg
4950 lb
Optional (dependent on drawbar position): 4990 kg
11,000 lb

Electrical system

Total cold cranking amps 1,850 CCA
Battery options 12 V
Working lights Standard: 18 halogen
Available: 18 LED
22 LED
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Available: LED
Alternator size Standard: 200 amp
Optional: 330 amp

Engine performance

Power boost 10 percent
PTO torque rise 40 percent
Rated power ECE-R120: 228 kW
310 hp
Rated PTO power (hp SAE) 191 kW
257 hp
Engine peak torque At 1600 rpm: 1452 Nm
1070 lb-ft
Maximum engine power ECE-R120: 251 kW
341 hp

Engine specifications

Rated speed 2100 rpm
Cylinders liners Wet-sleeve
Emission level Final Tier 4
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Aspiration Single, variable geometry turbo; air-to-air aftercooling and cooled exhaust gas recirculation
Engine family MJDXL09.0333
Displacement 9 L
549 cu in.
Description John Deere PowerTech™ PVS 9.0 L (B20 diesel compatible)

Front axle

Type 1700 Series MFWD
Front axle differential lock Full-locking electrohydraulic (actuated at same time as rear diff-lock)

Hydraulic system

Type Closed-center, pressure/flow compensated system with load sensing
SCV control Electronic
Available flow at front SCVs 96 L/min
25 gpm
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm
Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 4
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 1
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm

Key Specs

Engine description John Deere PowerTech™ PVS 9.0 L (B20 diesel compatible)
Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h (24.9 mph)
Optional: John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h (0.03-26 mph)
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm
Base machine weight e23, 457-mm (18-in.) front/rear and 3048-mm (120-in.) tread: 19,600 kg
43,300 lb
Rear hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg
15,000 lb
Maximum engine power ECE-R120: 251 kW
341 hp
Engine displacement 9 L
549 cu in.
Rated engine power ECE-R120: 228 kW
310 hp
Rated PTO power (hp SAE) 191 kW
257 hp

Miscellaneous

Country of manufacture USA

Operator station

Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Cab suspension Standard: four-post cab suspension
Instructional seat Standard
Cab glass area 6.52 m2
70.18 sq ft
Inner cab volume 3.24 m3
114 cu ft
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Display Standard: 4600 Generation 4 CommandCenter™: 25.4 cm
10 in.

Precision AG

Remote diagnostics JDLink hardware standard
Guidance Integrated AutoTrac™
Telematic JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)

Rear axle

Rear differential lock Full-locking electrohydraulic
Type Flange
Final drive type Inboard planetary

Rear hitch

Sensing type Electrohydraulic
Hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg
15,000 lb
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb

Rear power take-off (PTO)

Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
PTO actuation Electrohydraulic with adjustable modulation
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
Engine rpm (at rated PTO speeds) IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm
e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm

Serviceability

Interval for engine coolant change 6,000 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine oil change 500 hours

Steering

Type Standard: Hydraulic power-steering with electric pump backup

Tires

Turning radius without brakes 9.14 m
30 ft
With 3048-mm (120-in.) tread setting and 457-mm (18-in.) front and rear tracks
Measured center of drawbar in U-turn

Tracks

Tread spacing Available: 1930.4 mm
76 in.
2032 mm
80 in.
2235.2 mm
88 in.
3048 mm
120 in.
Midrollers Front: Two
Rear: Three
Drive type Camso® 4500 and 6500 General Ag Series - reinforced drive lug technology
Track width Available: 457 mm
18 in.
609 mm
24 in.
762 mm
30 in.

Transmission

Type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph
Optional: John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h (0.03-26 mph)

Weight

Maximum ballast level 20,000 kg
44,100 lb
Base machine weight e23, 457-mm (18-in.) front/rear and 3048-mm (120-in.) tread: 19,600 kg
43,300 lb
Maximum permissible weight 24,000 kg
53,000 lb

Additional information

Date collected 22-Jan-2021