Specifications

Capacities

Fuel tank 764 L
202 U.S. gal.
Crankcase oil volume 25.7 L
6.8 U.S. gal.
Cooling system 42.3 L
11.2 U.S. gal.
Diesel exhaust fluid (DEF) tank 31.3 L
8.3 U.S. gal.
Transmission-hydraulic system 197 L
52 U.S. gal.

Drawbar

Drawbar category Standard: Category 4
Optional: Category 4 with heavy-duty support
Maximum vertical load Standard: 2245 kg
4950 lb
Optional (dependent on drawbar position): 4990 kg
11,000 lb

Electrical system

Total cold cranking amps 1,850 CCA
Battery options 12 V
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Available: LED
Working lights Standard: 18 halogen
Available: 18 LED
22 LED
Alternator size Standard: 200 amp
Optional: 330 amp

Engine performance

Power boost 8 percent
PTO torque rise 40 percent
Rated power ECE-R120: 302 kW
410 hp
Engine peak torque At 1600 rpm: 1851 Nm
1365 lb-ft
Maximum engine power ECE-R120: 326 kW
443 hp
Rated PTO power (hp SAE) 231 kW
310 hp

Engine specifications

Rated speed 2100 rpm
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
Cylinders liners Wet-sleeve
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Engine family MJDXL09.0333
Description John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Displacement 9 L
549 cu in.

Hydraulic system

SCV control Electronic
Type Closed-center, pressure/flow compensated system with load sensing
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm
Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 4
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 1

Key Specs

Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Engine displacement 9 L
549 cu in.
Rated engine power ECE-R120: 302 kW
410 hp
Rated PTO power (hp SAE) 231 kW
310 hp
Base machine weight e23, 63.5-cm (25-in.) tracks: 15,600 kg
34,400 lb
Maximum engine power ECE-R120: 326 kW
443 hp
Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h (24.9 mph)
Engine description John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Rear hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg
15,000 lb

Miscellaneous

Country of manufacture USA

Operator station

Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Cab suspension Standard: four-post cab suspension
Instructional seat Standard
Cab glass area 6.52 m2
70.18 sq ft
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Display Standard: 4600 Generation 4 CommandCenter™: 25.4 cm
10 in.
Inner cab volume 3.24 m3
114 cu ft

Precision AG

Remote diagnostics JDLink hardware standard
Guidance Integrated AutoTrac™
Telematic JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)

Rear axle

Final drive type Inboard planetary three pinion

Rear hitch

Sensing type Electrohydraulic
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb
Hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg
15,000 lb

Rear power take-off (PTO)

PTO actuation Electrohydraulic with adjustable modulation
Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
Engine rpm (at rated PTO speeds) e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm

Serviceability

Interval for engine coolant change 6,000 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine oil change 500 hours

Steering

Type Standard: Hydraulic power-steering with electric pump backup

Tracks

Midrollers Three
Drive type Camso® 4500 and 6500 General Ag Series - friction drive track belts
Tread spacing Standard: 1,828.8 to 3,048 mm
72 - 120 in.
Track width Standard: 635 mm
25 in.
Available: 406 mm
16 in.
457 mm
18 in.
609 mm
24 in.
762 mm
30 in.

Transmission

Type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph

Weight

Base machine weight e23, 63.5-cm (25-in.) tracks: 15,600 kg
34,400 lb
Maximum ballast level 17,700 kg
39,000 lb
Maximum permissible weight 18,200 kg
40,100 lb

Additional information

Date collected 22-Jan-2021