Specifications

Capacities

Fuel tank 727 L
192 U.S. gal.
Crankcase oil volume 1500 MFWD: 27.6 L
7.3 U.S. gal.
ILS: 25.8 L
6.8 U.S. gal.
Cooling system 42.3 L
11.2 U.S. gal.
Transmission-hydraulic system 1500 MFWD: 184.6 L
48.8 U.S. gal.
ILS: 207.2 L
54.7 U.S. gal.
Diesel exhaust fluid (DEF) tank 37.2 L
9.8 U.S. gal.

Dimensions

Wheelbase MFWD: 3,080 mm
121.3 in.
ILS: 3,050 mm
120.1 in.
Drawbar clearance 376 mm
14.8 in.
Overall length 6,636 mm
261.3 in.
Front axle center MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.

Drawbar

Drawbar category Standard: Category 4
Optional: Category 4 with heavy-duty support
Maximum vertical load Dependent on drawbar position: 1837 to 2700 kg
4050 to 6000 lb
Optional: 2,245 kg
4,950 lb
4,990 kg
11,000 lb

Electrical system

Battery options 12 V
Total cold cranking amps 1,850 CCA
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Available: LED
Working lights Standard: 18 halogen
Available: 18 LED
22 LED
Alternator size Standard: 200 amp
Optional: 330 amp

Engine performance

PTO torque rise 40 percent
Power boost 10 percent
Rated PTO power (hp SAE) 231 kW
310 hp
Engine peak torque At 1600 rpm: 1732 Nm
1277 lb-ft
Maximum engine power ECE-R120: 299 kW
407 hp
Rated power ECE-R120: 272 kW
370 hp

Engine specifications

After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Cylinders liners Wet-sleeve
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Emission level Final Tier 4
Rated speed 2100 rpm
Engine family MJDXL09.0333
Displacement 9 L
549 cu in.
Description John Deere PowerTech™ 9.0 L (B20 diesel compatible)

Front axle

Front axle differential lock 1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic
Type Standard: ILS
Optional: 1500 Series MFWD

Front hitch

Category Category 3N
PTO speed 1,000 PTO rpm at 2000 engine rpm
Front power take-off (PTO) 44 mm (1.75 in.) 20 spline, 1000 rpm
35 mm (1.375 in.) 21 spline, 1000 rpm
35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)
Standard lift capacity Category 3N ground-engaging front hitch: 5200 kg
11,464 lb

Hydraulic system

SCV control Electronic
Type Closed-center, pressure/flow compensated system with load sensing
Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 4
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 1
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm

Key Specs

Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm
Engine description John Deere PowerTech™ 9.0 L (B20 diesel compatible)
Base machine weight ILS™/e23: 12,700 kg
28,000 lb
Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h (24.9 mph)
Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h (31 mph)
John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h (0.03-26 mph)
John Deere AutoPowr IVT 50K, 0.05-50 km/h (0.03-31 mph)
Rear hitch category (SAE designation) Standard: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg
15,000 lb
Optional: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb
Engine displacement 9 L
549 cu in.
Rated PTO power (hp SAE) 231 kW
310 hp
Maximum engine power ECE-R120: 299 kW
407 hp
Rated engine power ECE-R120: 272 kW
370 hp

Loaders

Loader H480
Lift capacity at full height 2,486 kg
5469 lb
measured at 800 mm (31.5 in.) ahead of pivot
Maximum lift height 4735 mm
186 in.

Miscellaneous

Country of manufacture USA

Operator station

Instructional seat Standard
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Display Standard: 4600 Generation 4 CommandCenter™: 25.4 cm
10 in.
Inner cab volume 3.24 m3
114 cu ft
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II
Cab glass area 6.52 m2
70.18 sq ft

Precision AG

Remote diagnostics JDLink hardware standard
Guidance Integrated AutoTrac™
Telematic JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)

Rear axle

Final drive type Inboard planetary three pinion
Rear differential lock Full-locking electrohydraulic
Type Standard: Rack-and-pinion, double flat, or flange axles
Optional: short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Long, double flat axle with single taper hub: Diameter: 120 x 3010 mm
4.72 x 118.5 in.

Rear hitch

Rear axle differential lock Electrohydraulic
Sensing type Electrohydraulic
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb
Hitch category (SAE designation) Standard: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg
15,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb

Rear power take-off (PTO)

PTO actuation Electrohydraulic with adjustable modulation
Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
Engine rpm (at rated PTO speeds) IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm
e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm

Serviceability

Interval for engine oil change 500 hours
Interval for engine coolant change 6,000 hours
Interval for hydraulic/transmission oil change 1,500 hours

Steering

Type Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand Steering 2 (ACS™ 2) with electronic backup pump

Tires

Central Tire Inflation System (CTIS) Optional
Turning radius without brakes ILS with 380/80R38 group 43 tires at 152.4-cm (60-in.) spacing: 5.77 m
18.9 ft
ILS with 600/70R30 group 43 tires at 187-cm (74-in.) spacing: 6.14 m
20.1 ft
Wheel tread range 1500 Series MFWD: 1524-3657 mm
60-144 in.
ILS: 1524-3657 mm

Transmission

Type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph
Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h
31 mph
John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h (0.03-26 mph)
John Deere AutoPowr IVT 50K, 0.05-50 km/h (0.03-31 mph)

Weight

Maximum ballast level 20,000 kg
44,100 lb
Base machine weight ILS™/e23: 12,700 kg
28,000 lb
Maximum permissible weight 20,000 kg
44,100 lb

Additional information

Date collected 1 March 2021