Specifications

Capacities

Diesel exhaust fluid (DEF) tank 37.2 L
9.8 U.S. gal.
Cooling system 42.3 L
11.2 U.S. gal.
Crankcase oil volume 1300 MFWD: 25.7 L
6.8 U.S. gal.
1500 MFWD: 27.6 L
7.3 U.S. gal.
ILS: 25.8 L
Fuel tank 727 L
192 U.S. gal.
CTIS: 651 L
172 U.S. gal.
Transmission-hydraulic system 1300 MFWD: 180.7 L
47.7 U.S. gal.
1500 MFWD: 184.6 L
48.8 U.S. gal.
ILS: 207.2 L
54.7 U.S. gal.

Dimensions

Overall length 6,636 mm
261.3 in.
Drawbar clearance 376 mm
14.8 in.
Front axle center MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.
Wheelbase MFWD: 3,080 mm
121.3 in.
ILS: 3,050 mm
120.1 in.

Drawbar

Drawbar category Standard: Category 3
Optional: Category 4
Category 4 with heavy-duty support
Maximum vertical load Dependent on drawbar position: 1837 to 2700 kg
4050 to 6000 lb
Optional: 2,245 kg
4,950 lb
4,990 kg
11,000 lb

Electrical system

Total cold cranking amps 1,850 CCA
Battery options 12 V
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Available: LED
Working lights Standard: 18 halogen
Available: 18 LED
22 LED
Alternator size Standard: 200 amp
Optional: 330 amp

Engine performance

Power boost 10 percent
PTO torque rise 40 percent
Maximum engine power ECE-R120: 186 kW
253 hp
Engine peak torque At 1600 rpm: 1077 Nm
794 lb-ft
Rated PTO power (hp SAE) 135 kW
182 hp
Rated power ECE-R120: 169 kW
230 hp

Engine specifications

Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Emission level Final Tier 4
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Aspiration Single, variable geometry turbo; air-to-air aftercooling and cooled exhaust gas recirculation
Rated speed 2100 rpm
Cylinders liners Wet-sleeve
Engine family MJDXL09.0333
Displacement 9 L
549 cu in.
Description John Deere PowerTech™ PVS 9.0 L (B20 diesel compatible)

Front axle

Front axle differential lock 1300 Series MFWD: Limited Slip
1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic
Type Standard: 1300 Series MFWD
Optional: 1500 Series MFWD
ILS

Front hitch

Category Category 3N
PTO speed 1,000 PTO rpm at 2000 engine rpm
Standard lift capacity Category 3N ground-engaging front hitch: 5200 kg
11,464 lb
Front power take-off (PTO) 44 mm (1.75 in.) 20 spline, 1000 rpm
35 mm (1.375 in.) 21 spline, 1000 rpm
35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)

Hydraulic system

SCV control Electronic
Type Closed-center, pressure/flow compensated system with load sensing
Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 4
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 1
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm
Available flow at front SCVs 96 L/min
25 gpm

Key Specs

Rated engine power ECE-R120: 169 kW
230 hp
Rated PTO power (hp SAE) 135 kW
182 hp
Engine displacement 9 L
549 cu in.
Maximum engine power ECE-R120: 186 kW
253 hp
Engine description John Deere PowerTech™ PVS 9.0 L (B20 diesel compatible)
Rear hitch category (SAE designation) Standard: Category 3/3N standard lift at 610 mm (24 in.) behind hitchpoint: 6350
14,000 lb
Optional: Category 3/3N at 610 mm (24 in.) behind hitchpoint: 8391 kg
18,500 lb
Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm
Base machine weight MFWD/PowerShift: 11,700 kg
25,800 lb
ILS™/e23: 12,700 kg
28,000 lb
Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h (24.9 mph)
Optional: 16-speed PowerShift 40 km/h (24.9 mph)
e23 PowerShift with Efficiency Manager 50K, 50 km/h (31 mph)
John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h (0.03-26 mph)
John Deere AutoPowr IVT 50K, 0.05-50 km/h (0.03-31 mph)

Loaders

Loader H480
Lift capacity at full height 2,486 kg
5469 lb
measured at 800 mm (31.5 in.) ahead of pivot
Maximum lift height 4735 mm
186 in.

Miscellaneous

Country of manufacture USA

Operator station

Cab suspension Optional
Instructional seat Standard
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Cab glass area 6.56 m2
70.61 sq ft
Inner cab volume 3.24 m3
114 cu ft
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II
Display Standard: 4600 Generation 4 CommandCenter™: 25.4 cm
10 in.

Precision AG

Remote diagnostics JDLink hardware standard
Guidance Integrated AutoTrac™
Telematic JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)

Rear axle

Final drive type Inboard planetary three pinion
Rear differential lock Full-locking electrohydraulic
Type Standard: Rack-and-pinion, double flat, or flange axles
Optional: Long, single taper hub: Diameter: 110 x 3010 mm
4.33 x 118.5 in.
Long, dual taper hub: Diameter: 110 x 3010 mm
Long, dual taper hub: Diameter: 120 x 3010 mm
4.72 x 118.5 in.
Short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.

Rear hitch

Sensing type Electrohydraulic
Rear axle differential lock Electrohydraulic
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb
Hitch category (SAE designation) Standard: Category 3/3N standard lift at 610 mm (24 in.) behind hitchpoint: 6350 kg
14,000 lb
Optional: Category 3/3N at 610 mm (24 in.) behind hitchpoint: 8391 kg
18,500 lb
Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb

Rear power take-off (PTO)

Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
PTO actuation Electrohydraulic with adjustable modulation
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
Engine rpm (at rated PTO speeds) 16-speed PowerShift: 1,000 PTO rpm at 2,003 engine rpm, 1,000 ECO PTO rpm at 1,596 engine rpm, 540 PTO rpm at 1,817 engine rpm
IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm
e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm

Serviceability

Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours

Steering

Type Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand Steering 2 (ACS™ 2) with electronic backup pump

Tires

Central Tire Inflation System (CTIS) Optional
Wheel tread range 1300 Series MFWD: 1524-2235 mm
60-88 in.
1500 Series MFWD: 1524-3657 mm
60-144 in.
ILS: 1524-3657 mm
Turning radius without brakes 1300 Series with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 5.4 m
17.7 ft
ILS with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 5.42 m
17.8 ft

Transmission

Type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph
Optional: 16-speed PowerShift 40 km/h
e23 PowerShift with Efficiency Manager 50K, 50 km/h
31 mph
John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h (0.03-26 mph)
John Deere AutoPowr IVT 50K, 0.05-50 km/h (0.03-31 mph)

Weight

Maximum ballast level 20,000 kg
44,100 lb
Maximum permissible weight 20,000 kg
44,100 lb
Base machine weight MFWD/PowerShift: 11,700 kg
25,800 lb
ILS™/e23: 12,700 kg
28,000 lb

Additional information

Date collected 22-Jan-2021