Specifications

Capacities

Transmission-hydraulic system MFWD: 140 L
37 U.S. gal.
ILS: 165 L
43.6 U.S. gal.
Crankcase oil volume 1500 MFWD: 28 L
7.4 U.S. gal.
ILS: 27.5 L
7.3 U.S. gal.
Cooling system 32.6 L
8.6 U.S. gal.
Fuel tank Group 47/48: 615 L
162.5 U.S. gal.
Group 49: 676 L
178.6 U.S. gal.
Diesel exhaust fluid (DEF) tank 23 L
6 U.S. gal.

Dimensions

Overall length 6,636 mm
261.3 in.
Drawbar clearance 376 mm
14.8 in.
Front axle center MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.
Wheelbase MFWD: 3,080 mm
121.3 in.
ILS: 3,050 mm
120.1 in.

Drawbar

Maximum vertical load 4,990 kg
11,000 lb
Drawbar category Standard: Category 4
Optional: Category 4 with heavy duty support

Electrical system

Type of bulb in beacon (Halogen, Zenon, LED)
Type of bulb in headlight (Halogen, Zenon, LED)
Total cold cranking amps 1,850 CCA
Battery options 12 V
Alternator size Standard: 200 amp

Engine performance

Rated power 97/68EC: 294 kW
400 hp
Power boost 8 percent
PTO torque rise 35 percent
Engine peak torque At 1600 rpm: 1,806 Nm
1,332 lb-ft
Rated PTO power (hp SAE) 233 kW
313 hp

Engine specifications

Aspiration Dual series turbocharger with fixed geometry first stage, variable geometry second stage; air-to-air aftercooling and cooled exhaust gas recirculation
Description John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Emission level Final Tier 4
Displacement 9 L
549 cu in.
Engine family JJDXL09.0308
After treatment type DOC/DPF/SCR
Rated speed 2,100 rpm
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head

Front axle

Type Standard: ILS
Optional: 1500 Series MFWD
Front axle differential lock 1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic

Front hitch

Standard lift capacity Category 3N ground engaging front hitch: 5,200 kg (11,464 lb) lift capacity
Category Category 3N
PTO speed 1,000 PTO rpm at 2,000 engine rpm
Front power take-off (PTO) 44 mm (1.75 in) 20 spline, 1,000 rpm
35 mm (1.375 in) 21 spline, 1,000 rpm
35 mm (1.375 in) 6 spline, 1,000 rpm (available dependent on location)

Hydraulic system

Number of rear selective control valves (SCVs) Standard: 0.5 in. ISO couplers: 10
Optional: 0.5 in. ISO Couplers: 5 and 6 available
3/4 in. ISO couplers: 7
Available flow at a single rear SCV 0.5 in. couplers: 132 L/min
35 gpm
0.75 in coupler: 159 L/min
42 gpm
Type Closed-center, pressure/flow compensated
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321 L/min
85 gpm
Available flow at front SCVs 96 L/min
25 gpm
SCV control Electronic

Key Specs

Engine description John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Base machine weight ILS/e23: 14,270 kg
31,459 lb
Engine displacement 9 L
549 cu in.
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321 L/min
85 gpm
Rated PTO power (hp SAE) 233 kW
313 hp
Rated engine power 97/68EC: 294 kW
400 hp
Transmission type Standard: e23 Powershit with Efficiency Manager™ 40K, 40 km/h
26 mph
Optional: e23 Powershift with Efficiency Manager™ 50K, 50 km/h
31 mph
Rear hitch category (SAE designation) Standard: Category 4N/3: 9,072 kg (20,000 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 4N/3: 6,803 kg (15,000 lb) at 610 mm behind hitchpoint

Loaders

Lift capacity at full height 2,486 kg
5469 lb
measured at 800 mm ahead of pivot
Maximum lift height 4,735 mm
186 in.
Loader H480

Miscellaneous

Country of manufacture USA

Operator station

Rollover protective structure, OOS

Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Display Standard: 4100 Generation 4 CommandCenter™ with 7 in. display
Optional: 4600 Generation 4 CommandCenter™ with 10 in. display
Cab suspension Optional
Instructional seat Standard
Inner cab volume 3.597 m3
127 cu ft
Seat Standard: ComfortCommand™
Optional: ActiveSeat™
Cab glass area 6.52 m2
70.18 sq ft

Precision AG

Remote diagnostics Available with activated JDLink™ hardware and activations
Guidance AutoTrac Ready
Telematic Available with JDLink™ hardware, activations, and Ethernet Harnesses (availability dependent upon destination)

Rear axle

Rear differential lock Full-locking electrohydraulic
Type Standard: Rack-and-pinion, double flat, or flange axles
Optional: short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Long, double flat axle with single taper hub: Diameter: 120 x 3010 mm
4.72 x 118.5 in.
Final drive type Inboard planetary three pinion

Rear hitch

Hitch category (SAE designation) Standard: Category 4N/3: 9,072 kg (20,000 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 4N/3: 6,803 kg (15,000 lb) at 610 mm behind hitchpoint
Maximum lift capacity behind lift points Standard: 12,124 kg (26,729 lb) at 610 mm behind hitchpoint
Sensing type Electrohydraulic

Rear power take-off (PTO)

Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 45 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
Engine rpm (at rated PTO speeds) e23 PST: 1,000 PTO rpm at 1,995 engine rpm
1,000 ECO PTO at 1,590 engine rpm
540 PTO rpm at 1,810 engine rpm

Serviceability

Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours

Steering

Type Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand™ Steering (ACS) with electric pump back-up

Tires

Turning radius without brakes ILS with 380/85R34 group 42 tires at 60 in. spacing, 5.42 m
17.8 ft
Wheel tread range 1500 Series MFWD: 1,524-3,657 mm
60-144 in.
ILS: 1,524-3,657 mm

Transmission

Type Standard: e23 Powershit with Efficiency Manager™ 40K, 40 km/h
26 mph
Optional: e23 Powershift with Efficiency Manager™ 50K, 50 km/h
31 mph

Weight

Base machine weight

ILS/e23: 14,270 kg
31,459 lb
Maximum ballast level SAE PTO kW: 88.6 kg
SAE PTO hp: 145 lb