Specifications

Capacities

Crankcase oil volume 1500 MFWD: 28 L
7.4 U.S. gal.
ILS: 27.5 L
7.3 U.S. gal.
Fuel tank Group 47/48: 615 L
162.5 U.S. gal.
Group 49: 676 L
178.6 U.S. gal.
Cooling system 32.6 L
8.6 U.S. gal.
Transmission-hydraulic system MFWD: 140 L
37 U.S. gal.
ILS: 165 L
43.6 U.S. gal.
Diesel exhaust fluid (DEF) tank 23 L
6 U.S. gal.

Dimensions

Drawbar clearance 376 mm
14.8 in.
Front axle center MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.
Overall length 6,636 mm
261.3 in.
Wheelbase MFWD: 3,080 mm
121.3 in.
ILS: 3,050 mm
120.1 in.

Drawbar

Maximum vertical load 4,990 kg
11,000 lb
Drawbar category Standard: Category 4
Optional: Category 4 with heavy duty support

Electrical system

Alternator size Standard: 200 amp
Type of bulb in headlight (Halogen, Zenon, LED)
Battery options 12 V
Total cold cranking amps 1,850 CCA
Type of bulb in beacon (Halogen, Zenon, LED)

Engine performance

Power boost 10 percent
Engine peak torque At 1600 rpm: 1,732 Nm
1,277 lb-ft
Rated power 97/68EC: 272 kW
370 hp
PTO torque rise 40 percent
Rated PTO power (hp SAE) 233 kW
313 hp

Engine specifications

Rated speed 2,100 rpm
Displacement 9 L
549 cu in.
Aspiration Dual series turbocharger with fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
After treatment type DOC/DPF/SCR
Engine family JJDXL09.0308
Emission level Final Tier 4

Front axle

Type Standard: ILS
Optional: 1500 Series MFWD
Front axle differential lock 1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic

Front hitch

Category Category 3N
Front power take-off (PTO) 44 mm (1.75 in) 20 spline, 1,000 rpm
35 mm (1.375 in) 21 spline, 1,000 rpm
35 mm (1.375 in) 6 spline, 1,000 rpm (available dependent on location)
Standard lift capacity Category 3N ground engaging front hitch: 5,200 kg (11,464 lb) lift capacity
PTO speed 1,000 PTO rpm at 2000 engine rpm

Hydraulic system

SCV control Electronic
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321 L/min
85 gpm
Available flow at a single rear SCV 0.5 in. couplers: 132 L/min
35 gpm
0.75 in coupler: 159 L/min
42 gpm
Available flow at front SCVs 96 L/min
25 gpm
Type Closed-center, pressure/flow compensated
Number of rear selective control valves (SCVs) Standard: 0.5 in. ISO couplers: 9
Optional: 0.5 in. ISO Couplers: 5 and 6 available
0.75 in. ISO couplers: 6

Key Specs

Rated PTO power (hp SAE) 233 kW
313 hp
Rated engine power 97/68EC: 272 kW
370 hp
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321 L/min
85 gpm
Transmission type Standard: e23 Powershit with Efficiency Manager™ 40K, 40 km/h
26 mph
e23 Powershift with Efficiency Manager™ 50K, 50 km/h
31 mph
John Deere AutoPowr™ IVT™ 40K, 26 mph (0.05-42 km/h)
John Deere AutoPowr™ IVT™ 50K, 31 mph (0.05-50 km/h)
Base machine weight ILS/e23: 14,270 kg
31,459 lb
Engine displacement 9 L
549 cu in.
Engine description Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Rear hitch category (SAE designation) Standard: Category 4N/3: 9,072 kg (20,000 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 4N/3: 6,803 kg (15,000 lb) at 610 mm behind hitchpoint

Loaders

Lift capacity at full height 2,486 kg
5,469 lb
measured at 800 mm ahead of pivot
Loader H480
Maximum lift height 4,735 mm
186 in.

Miscellaneous

Country of manufacture USA

Operator station

Cab glass area 6.52 m2
70.18 sq ft
Inner cab volume 3.597 m3
127 cu ft
Instructional seat Standard
Rollover protective structure, OOS

Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Cab suspension Optional
Seat Standard: ComfortCommand™
Optional: ActiveSeat™
Display Standard: 4100 Generation 4 CommandCenter™ with 7 in. display
Optional: 4600 Generation 4 CommandCenter™ with 10 in. display

Precision AG

Remote diagnostics Available with activated JDLink™ hardware and activations
Guidance AutoTrac Ready
Telematic Available with JDLink™ hardware, activations, and Ethernet Harnesses (availability dependent upon destination)

Rear axle

Final drive type Inboard planetary three pinion
Type Standard: Rack-and-pinion, double flat, or flange axles
Optional: Long, dual taper hub: Diameter: 120 x 3010 mm
4.72 x 118.5 in.
Short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Rear differential lock Full-locking electrohydraulic

Rear hitch

Sensing type Electrohydraulic
Maximum lift capacity behind lift points Standard: 12,124 kg (26,729 lb) at 610 mm behind hitchpoint
Hitch category (SAE designation) Standard: Category 4N/3: 9,072 kg (20,000 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 4N/3: 6,803 kg (15,000 lb) at 610 mm behind hitchpoint

Rear power take-off (PTO)

Engine rpm (at rated PTO speeds) IVT: 1,000 PTO rpm at 2,000 engine rpm 1,000 ECO PTO at 1594 engine rpm 540 PTO rpm at 1,814 engine rpm
e23 PST: 1,000 PTO rpm at 1,995 engine rpm 1,000 ECO PTO at 1,590 engine rpm 540 PTO rpm at 1,810 engine rpm
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm

Serviceability

Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours
Interval for engine oil change 500 hours

Steering

Type Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand™ Steering (ACS) with electric pump back-up

Tires

Wheel tread range 1500 Series MFWD: 1,524-3,657 mm
60-144 in.
ILS: 1,524-3,657 mm
Turning radius without brakes ILS with 380/85R34 group 42 tires at 60 in. spacing,

Transmission

Type Standard: e23 Powershit with Efficiency Manager™ 40K, 40 km/h
26 mph
e23 Powershift with Efficiency Manager™ 50K, 50 km/h
31 mph
John Deere AutoPowr™ IVT™ 40K, 26 mph (0.05-42 km/h)
John Deere AutoPowr™ IVT™ 50K, 31 mph (0.05-50 km/h)

Weight

Maximum ballast level SAE PTO kW: 88.6 kg
SAE PTO hp: 145 lb
Base machine weight

ILS/e23: 14,270 kg
31,459 lb