Specifications

Capacities

Cooling system 44.5 L
11.8 U.S. gal.
Crankcase oil volume 23 L
6.1 U.S. gal.
Fuel tank e23™: 463 L
122 U.S. gal.
IVT: 513 L
135 U.S. gal.
Diesel exhaust fluid (DEF) tank 26.2 L
6.9 U.S. gal.
Transmission-hydraulic system 160 L
42.3 U.S. gal.

Dimensions

Drawbar clearance Group 48 rear tires: 415 mm
16.3 in.
Group 49 rear tires: 461 mm
18.1 in.
Overall length 5,540 mm
218 in.
Wheelbase 2,925 mm
115.2 in.

Drawbar

Drawbar category Standard: Category 4
Maximum vertical load Standard: Category 3: 1,837 kg
4,050 lb
Optional: Category 3 with heavy-duty support: 4,536 kg
10,000 lb

Electrical system

Battery options 12 V
Total cold cranking amps With two 925 CCA group 31 batteries: 1850 CCA
Alternator size Standard: 210 amp
Optional: 250 amp
Working lights Standard: 18 halogen
Available: 18 LED or 22 LED
Type of bulb in headlight (Halogen, Zenon, LED) Standard: 65-W halogen
Available: LED

Engine performance

PTO torque rise 40 percent
Power boost 22.4 kW
30 hp
Rated PTO power (hp SAE) 193 kW
260 hp
Engine peak torque At 1600 rpm: 1,545 Nm
1,139 lb-ft
Rated power ECE-R120: 243 kW
330 hp
Maximum engine power ECE-R120: 267 kW
363 hp

Engine specifications

Aspiration Single turbocharger, variable geometry turbo
Engine family JJDXL09.0308
Emission level Final Tier 4
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves in head
Rated speed 2100 rpm
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)
Description John Deere PowerTech™ PVS (B20 Diesel Compatible) 9.0L
Displacement 9 L
549 cu in.

Front axle

Front axle differential lock 1300 Series MFWD: Limited slip
TLS: Limited slip
TLS with front brakes: Full-locking electrohydraulic (actuated at same time as rear diff lock)
Type Standard: 1300 Series MFWD: tread range 1524 to 2235 mm
60 to 88 in.
Optional: TLS: Tread range 1524 to 2235 mm
TLS with front brakes available with 40 km/h
24.9 mph
TLS with front brakes standard with 50 km/h
31 mph

Front hitch

Category Category 3N, ground engaging
Electric power Seven-pin connector
PTO speed 1,000 PTO rpm at 1940 engine rpm
Front power take-off (PTO) Available
Optional: 44.45 mm (1.75 in.), 20 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
35 mm (1.375 in.) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
35 mm (1.375 in.) 6 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)**
Standard lift capacity 5,200 kg
11,464 lb

Hydraulic system

Type Closed-center, pressure/flow compensated system with load sensing
SCV control Electronic
Number of front selective control valves (SCVs) One with front hitch
Available flow at front SCVs 126 L/min
33 gpm
Pump rated output Standard: 63 cc: 162 L/min
43 gpm
Optional: 85 cc: 222.3 L/min
59 gpm
Number of rear selective control valves (SCVs) Standard: Four SCVs
Optional: Three to six ISO couplers: 12.7 mm
1/2 in.
Five ISO couplers (SCV 1: 19-mm [3/4-in.] couplers, SCV 2-5: 12.7-mm [1/2-in.] coupler)
Available flow at a single rear SCV 132 L/min
35 gpm

Key Specs

Engine displacement 9 L
549 cu in.
Transmission type Standard: John Deere e23™ 42 km/h
26 mph
Optional: John Deere e23 transmission 50 km/h
31 mph
John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph)
John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph)
Hydraulic pump rated output Standard: 63 cc: 162 L/min
43 gpm
Optional: 85 cc: 222.3 L/min
59 gpm
Base machine weight e23, TLS™, 18.4R46: 10,000 kg
22,000 lb
Maximum engine power ECE-R120: 267 kW
363 hp
Engine description John Deere PowerTech™ PVS (B20 Diesel Compatible) 9.0L
Rear hitch category (SAE designation) Standard: Category 3N/3 with Quik-Coupler
Optional: Category 3/3N with hook ends
Category 3N/3 with hook ends
Rated PTO power (hp SAE) 193.9 kW
260 hp
Rated engine power ECE-R120: 243 kW
330 hp

Loaders

Loader H480
Lift capacity at full height 2,411 kg
5,315 lb
Maximum lift height 4,704 mm
185.2 in.

Miscellaneous

Country of manufacture USA

Operator station

Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Cab suspension Optional
Instructional seat Standard
Cab glass area 6.56 m2
70.61 sq ft
Display Standard: 4100 Generation 4 CommandCenter™: 17.8 cm
7 in.
Optional: 4600 Generation 4 CommandCenter: 25.4 cm
10 in.
Inner cab volume 3.24 m3
114 cu ft
Seat Degree of seat swivel, left hand
25 degree
Degree of seat swivel, right hand
40 degree
Standard: air suspension
Optional: ActiveSeat™ II

Precision AG

Guidance Integrated AutoTrac™
Telematic JDLink™
Remote diagnostics ServiceADVISOR™ Remote: available with JDLink hardware and activations
Remote Display Access: available with JDLink hardware and activations

Rear axle

Rear differential lock Full-locking electrohydraulic
Final drive type Inboard planetary three pinion
Type Standard: Rack-and-pinion or flange axles
Optional: Diameter: 110 x 2550 mm
4.33 x 100.4 in.
Diameter: 110 x 3010 mm
4.33 x 118.5 in.
Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Diameter: 120 x 3010 mm
4.72 x 118.5 in.
Flanged axle: 335 mm (13.2 in.)

Rear hitch

Sensing type Electrohydraulic
Hitch category (SAE designation) Standard: Category 3N/3 with Quik-Coupler
Optional: Category 3/3N with hook ends
Category 3N/3 with hook ends
Maximum lift capacity behind lift points Standard (Category 3): 6,894 kg
15,200 lb
Optional (Category 3N): 7,847 kg
17,300 lb
Standard (Category 3 with hook ends): 6,894 kg
Optional (Category 3N with hook ends): 7,847 kg

Rear power take-off (PTO)

PTO actuation Electric switch with adjustable modulation
Type Independent
Standard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44.45 mm (1.75 in.) 20-spline, 1000 rpm with 35-mm (1.375-in.) 540E/1000/1000E rpm gearcase
44.45 mm (1.75 in.) 20-spline, 1000 rpm with 35-mm (1.375-in.) 540/540E/1000 rpm gearcase
Engine rpm (at rated PTO speeds) 540/1000 PTO rpm at 1950 engine rpm
540E/1000E PTO rpm at 1750 engine rpm

Serviceability

Interval for engine coolant change 6,000 hours
Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1,500 hours

Steering

Type Standard: Hydrostatic power
Optional: ActiveCommand Steering (ACS™) with electric pump back-up

Tires

Rear RCI Group 48/49
Front RCI Group 43/44
Turning radius with brakes 600/70R30 group 43 tires at 188.2-cm (74.1-in.) spacing, TLS: 6.7 m
22 ft
620/75R30 group 44 tires at 208.3-cm (82-in.) spacing, TLS: 8.7 m
28.5 ft

Transmission

Type Standard: John Deere e23™ 42 km/h
26 mph
Optional: John Deere e23 transmission 50 K
31 mph
John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph)
John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph)

Weight

Base machine weight e23, TLS, 18.4R46: 10,000 kg
22,000 lb
Maximum ballast level SAE PTO hp: 61.2 kg
135 lb

Additional information

Date collected 12-Oct-19