Specifications

Capacities

Crankcase oil volume 26 L
6.9 U.S. gal.
Diesel exhaust fluid (DEF) tank 26.2 L
6.9 U.S. gal.
Transmission-hydraulic system 160 L
42.3 U.S. gal.
Fuel tank e23™: 463 L
122 U.S. gal.
IVT: 513 L
135 U.S. gal.
Cooling system 39.5 L
10.4 U.S. gal.

Dimensions

Overall length 5540 mm
218 in.
Drawbar clearance Group 47 rear tires: 360 mm
14.2 in.
Group 48 rear tires: 415 mm
16.3 in.
Group 49 rear tires: 461 mm
18.1 in.
Wheelbase 2925 mm
115.2 in.

Drawbar

Maximum vertical load Standard: Category 3: 1837 kg
4050 lb
Optional: Category 3 with heavy-duty support: 4536 kg
10,000 lb
Drawbar category Standard: Category 3
Optional: Category 3 with heavy-duty support
Category 4

Electrical system

Total cold cranking amps With two 925 CCA group 31 batteries: 1850 CCA
Battery options 12 V
Working lights Standard: 18 halogen
Available: 18 LED or 22 LED
Type of bulb in headlight (Halogen, Zenon, LED) Standard: 65-W halogen
Available: LED
Alternator size Standard: 210 amp
Optional: 250 amp

Engine performance

PTO torque rise 40 percent
Rated power ECE-R120: 184 kW
250 hp
Power boost IPM: 25 kW
30 hp
Rated PTO power (hp SAE) 152 kW
205 hp
Engine peak torque At 1600 rpm: 1171 Nm
864 lb-ft
Maximum engine power ECE-R120: 202 kW
275 hp

Engine specifications

Emission level Final Tier 4
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)
Engine family JJDXL06.8309
Rated speed 2100 rpm
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Description John Deere PowerTech™ (B20 diesel compatible) 6.8L
Displacement 6.8 L
415 cu in.

Front axle

Type Standard: 1300 Series MFWD: tread range 1524 to 2235 mm
60 to 88 in.
Optional: TLS: Tread range 1524 to 2235 mm
TLS with front brakes available with 40 km/h
24.9 mph
TLS with front brakes standard with 50 km/h
31 mph
Front axle differential lock 1300 Series MFWD: Limited slip
TLS: Limited slip
TLS with front brakes: Full-locking electrohydraulic (actuated at same time as rear diff lock)

Front hitch

PTO speed 1,000 PTO rpm at 1940 engine rpm
Electric power Seven-pin connector
Category Category 3N, ground engaging
Front power take-off (PTO) Available: 35 mm (1.375 in.) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
Available through Parts: 44.45 mm (1.75 in.), 20 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
Standard lift capacity 5,200 kg
11,464 lb

Hydraulic system

Type Closed-center, pressure/flow compensated system with load sensing
SCV control Electronic
Number of front selective control valves (SCVs) One with front hitch
Available flow at a single rear SCV 132 L/min
35 gpm
Available flow at front SCVs 126 L/min
33 gpm
Number of rear selective control valves (SCVs) Standard: Four SCVs
Optional: Three to six ISO couplers: 12.7 mm
1/2 in.
Five ISO couplers (SCV 1: 19-mm [3/4-in.] couplers, SCV 2-5: 12.7-mm [1/2-in.] coupler)
Pump rated output Standard: 63 cc: 162 L/min
43 gpm
Optional: 85 cc: 222.3 L/min
59 gpm

Key Specs

Hydraulic pump rated output Standard: 63 cc: 162 L/min
43 gpm
Optional: 85 cc: 222.3 L/min
59 gpm
Transmission type Standard: John Deere e23™ 42
26 mph
Optional: John Deere e23 transmission 50 km/h
31 mph
John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph)
John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph)
Base machine weight e23, TLS™, 18.4R46: 10,000 kg
22,000 lb
Engine displacement 6.8 L
415 cu in.
Engine description John Deere PowerTech™ (B20 diesel compatible) 6.8L
Rear hitch category (SAE designation) Standard: Category 3/3N with Quik-Coupler
Optional: Category 3/3N with hook ends
Category 3N/3 with hook ends
Maximum engine power ECE-R120: 202 kW
275 hp
Rated engine power ECE-R120: 184 kW
250 hp
Rated PTO power (hp SAE) 152 kW
205 hp

Loaders

Loader 700M
Lift capacity at full height 2417 kg
5304 lb
Maximum lift height 4741 mm
186 in.

Miscellaneous

Country of manufacture USA

Operator station

Cab suspension Optional
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Instructional seat Standard
Display Standard: 4600 Generation 4 CommandCenter™: 25.4
10 in.
Seat Degree of seat swivel, left hand
Optional: 25 degree
Degree of seat swivel, right hand
40 degree
Standard: air suspension
Optional: ActiveSeat™ II
Inner cab volume 3.24 m3
114 cu ft
Cab glass area 6.56 m2
70.61 sq ft

Precision AG

Guidance Integrated AutoTrac™
Remote diagnostics ServiceADVISOR™ Remote: available with JDLink hardware and activations
Remote Display Access: available with JDLink hardware and activations
Telematic JDLink™

Rear axle

Final drive type Inboard planetary three pinion
Rear differential lock Full-locking electrohydraulic
Type Standard: Rack-and-pinion or flange axles
Optional: Diameter: 110 x 2550 mm
4.33 x 100.4 in.
Diameter: 110 x 3010 mm
4.33 x 118.5 in.
Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Diameter: 120 x 3010 mm
4.72 x 118.5 in.
Flanged axle: 335 mm (13.2 in.)

Rear hitch

Sensing type Electrohydraulic
Maximum lift capacity behind lift points Standard (Category 3): 6894 kg
15,200 lb
Optional (Category 3N): 7847 kg
17,300 lb
Standard (Category 3 with hook ends): 6984 kg
Optional (Category 3 with hook ends): 7847 kg
Hitch category (SAE designation) Standard: Category 3/3N with Quik-Coupler
Optional: Category 3/3N with hook ends
Category 3N/3 with hook ends

Rear power take-off (PTO)

PTO actuation Electric switch with adjustable modulation
Type Independent
Standard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44.45 mm (1.75 in.) 20-spline, 1000 rpm with 35-mm (1.375-in.) 540E/1000/1000E rpm gearcase
44.45 mm (1.75 in.) 20-spline, 1000 rpm with 35-mm (1.375-in.) 540/540E/1000 rpm gearcase
Engine rpm (at rated PTO speeds) 540/1000 PTO rpm at 1950 engine rpm
540E/1000E PTO rpm at 1750 engine rpm

Serviceability

Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours

Steering

Type Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand Steering 2 (ACS2) w/ electronic back-up pump

Tires

Front RCI Group 42/43/44
Rear RCI Group 47/48/49
Turning radius with brakes 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 1300: 7 m
23 ft
600/70R30 group 43 tires at 188.2-cm (74.1-in.) spacing, TLS: 6.7 m
22 ft
620/75R30 group 44 tires at 208.3-cm (82-in.) spacing, TLS: 8.7 m
28.5 ft

Transmission

Type Standard: John Deere e23™ 42 km/h
26 mph
Optional: John Deere e23 transmission 50 km/h
31 mph
John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph)
John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph)

Weight

Maximum ballast level SAE PTO hp: 65.8 kg
145 lb
Base machine weight e23, TLS, 18.4R46: 10,000 kg
22,000 lb

Additional information

Date collected 10-Jul-2020