Specifications

Capacities

Diesel exhaust fluid (DEF) tank 26.2 L
6.9 U.S. gal.
Cooling system 39.5 L
10.4 U.S. gal.
Crankcase oil volume 26 L
6.9 U.S. gal.
Fuel tank e23™: 463 L
122 U.S. gal.
IVT: 513 L
135 U.S. gal.
Transmission-hydraulic system 160 L
42.3 U.S. gal.

Dimensions

Overall length 5520 mm
217 in.
Drawbar clearance Group 47 rear tires: 360 mm
14.2 in.
Group 48 rear tires: 415 mm
16.3 in.
Wheelbase 2,925 mm
115.2 in.

Drawbar

Drawbar category Standard: Category 3
Optional: Category 3 with heavy-duty support
Category 4
Maximum vertical load Standard: Category 3: 1,837 kg
4,050 lb
Optional: Category 3 with heavy-duty support: 4,536 kg
10,000 lb

Electrical system

Battery options 12 V
Total cold cranking amps With two 925 CCA group 31 batteries: 1850 CCA
Working lights Standard: 18 halogen
Available: 18 LED or 22 LED
Alternator size Standard: 210 amp
Optional: 250 amp
Type of bulb in headlight (Halogen, Zenon, LED) Standard: 65-W halogen
Available: LED

Engine performance

PTO torque rise 40 percent
Rated PTO power (hp SAE) 126 kW
170 hp
Engine peak torque At 1600 rpm: 983 Nm
725 lb-ft
Maximum engine power ECE-R120: 170 kW
231 hp
Rated power ECE-R120: 154 kW
210 hp
Power boost IPM: 23 kW
30 hp

Engine specifications

Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)
Rated speed 2100 rpm
Aspiration Single turbocharger, variable geometry turbo
Engine family JJDXL06.8309
Emission level Final Tier 4
Description John Deere PowerTech™ PVS (B20 Diesel Compatible) 6.8L
Displacement 6.8 L
415 cu in.

Front axle

Front axle differential lock 1150 Series MFWD: Limited slip
TLS: Limited slip
TLS with front brakes: Full-locking electrohydraulic (actuated at same time as rear diff lock)
Type Standard: 1150 Series MFWD: tread range 1524 to 2235 mm
60 to 88 in.
Optional: TLS: Tread range 1524 to 2235 mm
TLS with front brakes available with 40 km/h
24.9 mph
TLS with front brakes standard with 50 km/h
31 mph

Front hitch

Category Category 3N, ground engaging
Electric power Seven-pin connector
PTO speed 1,000 PTO rpm at 1940 engine rpm
Standard lift capacity 5,200 kg
11,464 lb
Front power take-off (PTO) Available: 35 mm (1.375 in.) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
Available through Parts: 44.45 mm (1.75 in.), 20 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)

Hydraulic system

SCV control Electronic
Number of front selective control valves (SCVs) One with front hitch
Type Closed-center, pressure/flow compensated system with load sensing
Pump rated output Standard: 63 cc: 162 L/min
43 gpm
Optional: 85 cc: 222.3 L/min
59 gpm
Available flow at a single rear SCV 132 L/min
35 gpm
Number of rear selective control valves (SCVs) Standard: four SCVs
Optional: Three to six ISO couplers: 12.7 mm
1/2 in.
Five ISO couplers (SCV 1: 19-mm [3/4-in.] couplers, SCV 2-5: 12.7-mm [1/2-in.] coupler)
Available flow at front SCVs 126 L/min
33 gpm

Key Specs

Hydraulic pump rated output Standard: 63 cc: 162 L/min
43 gpm
Optional: 85 cc: 222.3 L/min
59 gpm
Rear hitch category (SAE designation) Standard: Category 3/3N with Quik-Coupler
Optional: Category 3/3N with hook ends
Rated engine power ECE-R120: 154 kW
210 hp
Engine description John Deere PowerTech™ PVS (B20 Diesel Compatible) 6.8L
Base machine weight e23, TLS™, 18.4R46: 10,000 kg
22,000 lb
Transmission type Standard: John Deere e23™ 42 km/h
26 mph
Optional: John Deere e23 transmission 50 km/h
31 mph
John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph)
John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph)
Maximum engine power ECE-R120: 170 kW
231 hp
Rated PTO power (hp SAE) 126 kW
170 hp
Engine displacement 6.8 L
415 cu in.

Loaders

Loader 700M
Lift capacity at full height 2417 kg
5304 lb
Maximum lift height 4741 mm
186 in.

Miscellaneous

Country of manufacture USA

Operator station

Instructional seat Standard
Cab suspension Optional
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume 3.24 m3
114 cu ft
Display Standard: 4200 Generation 4 CommandCenter™: 17.8 cm
7 in.
Optional: 4600 Generation 4 CommandCenter: 25.4 cm
10 in.
Seat Degree of seat swivel, left hand
Optional: 25 degree
Degree of seat swivel, right hand
40 degree
Standard: air suspension
Optional: ActiveSeat™ II
Cab glass area 6.56 m2
70.61 sq ft

Precision AG

Telematic JDLink™
Remote diagnostics ServiceADVISOR™ Remote: available with JDLink hardware and activations
Remote Display Access: available with JDLink hardware and activations
Guidance Integrated AutoTrac™

Rear axle

Final drive type Inboard planetary three pinion
Rear differential lock Full-locking electrohydraulic
Type Standard: Rack-and-pinion or flange axles
Optional: Diameter: 100 x 3010 mm
3.94 x 118.5 in.
Diameter: 100 x 2808 mm
3.94 x 110.5 in.
Diameter: 100 x 2550 mm
3.94 x 100.4 in.
Flanged Axle: 335 mm
13.2 in.

Rear hitch

Sensing type Electrohydraulic
Hitch category (SAE designation) Standard: Category 3/3N with Quik-Coupler
Optional: Category 3/3N with hook ends
Maximum lift capacity behind lift points Standard (Category 3): 5443 kg
12,000 lb
Optional (Category 3N): 6894 kg
15,200 lb
Standard (Category 3 with hook ends): 5443 kg
Optional (Category 3 with hook ends): 6894 kg
15,000 lb

Rear power take-off (PTO)

PTO actuation Electric switch with adjustable modulation
Engine rpm (at rated PTO speeds) 540/1000 PTO rpm at 1950 engine rpm
540E/1000E PTO rpm at 1750 engine rpm
Type Independent
Standard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35 mm (1.375 in.) 540E/1000/1000E rpm gearcase
44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35 mm (1.375 in.) 540/540E/1000 rpm gearcase

Serviceability

Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours

Steering

Type Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand Steering 2 (ACS2) w/ electronic back-up pump

Tires

Front RCI Group 42/43
Rear RCI Group 47/48
Turning radius with brakes 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing 1300: 7 m
23 ft
600/70R30 group 43 tires at 188.2-cm (74.1-in.) spacing TLS: 6.7 m
22 ft

Transmission

Type Standard: John Deere e23™ 42 km/h
26 mph
Optional: John Deere e23™ Transmission 50 km/h
31 mph
John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph)
John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph)

Weight

Base machine weight e23, TLS, 18.4R46: 10,000 kg
23,000 lb
Maximum ballast level SAE PTO hp: 65.8 kg
145 lb

Additional information

Date collected 10-Jul-2020