Fuel tank Standard: 410 L
108.3 U.S. gal.
Crankcase oil volume 23.5 L
6.2 U.S. gal.
Cooling system 29.4 L
7.7 U.S. gal.
Transmission-hydraulic system IVT: 160 L
42.2 U.S. gal.
Diesel exhaust fluid (DEF) tank 25 L
6.6 U.S. gal.


Overall height 3160 mm
124.4 in.
Front axle center 588 mm
23.1 in.
Approximate shipping weight, Open;Cab 9300 kg
20,503 lb
Overall width 1892 mm
74.5 in.
Wheelbase MFWD: 2900 mm
114 in.
Overall length 5050 mm
198.8 in.


Drawbar category Category 3
Maximum vertical load Category 3: 1600-2800 kg
3527-6172 lb
Maximum vertical load dependent on drawbar position

Electrical system

Battery options 12 V
Total cold cranking amps 1850 CCA
With cold weather package or IVT: 1400 CCA
Alternator size Standard: 250 amp
Optional: 250 amp
Type of bulb in headlight (Halogen, Zenon, LED) Standard: Halogen, 65 W
Optional: LED
Working lights Standard: 14 halogen
Available: 12 light-emitting diode (LED) plus two halogen

Engine performance

Power boost 10 percent
PTO torque rise 40 percent
Rated power 97/68EC: 184 kW
250 hp
Maximum engine power 97/68EC: 202 kW
275 hp
Rated PTO power (hp SAE) 149 kW
203 hp
Engine peak torque At 1,600 rpm: 1167 Nm
860 lb-ft
Intelligent Power Management (IPM) Transport and/or mobile PTO applications
Additional engine power (hp ISO) at 2100 rpm: 29.8 kW 40 hp
Maximum PTO power 253 hp
186 kW

Engine specifications

Aspiration Turbocharged, variable geometry and fixed turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
After treatment type DOC/DPF/SCR
Description John Deere PowerTech™ PSS
Rated speed 2100 rpm
Emission level Final Tier 4
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Engine family JDXL06.8324
Displacement 6.8 L
415 cu in.

Front axle

Front axle differential lock TLS: Limited slip
TLS with brakes: Full-locking electrohydraulic
Type Standard: Triple-Link Suspension (TLS™)

Front hitch

PTO speed Engine at PTO speed (1000): 1965 rpm
Front power take-off (PTO) 1000 rpm, clockwise rotation (from driving position)
Category Category 3N
Standard lift capacity At hook ends: 3300 kg
7275 lb
Electric power Seven-pin electrical socket
Optional: Three-pin and ISOBUS socket

Hydraulic system

Type Closed-center, pressure/flow compensated
Joystick SCV control Available
Number of mid selective control valves (SCVs) Up to three
SCV control Standard: Electronic
Optional: Electronic
Number of rear selective control valves (SCVs) Standard: Three ISO couplers
Optional: Three to six ISO couplers
Pump rated output Standard: 85 cc pump: 160 L/min
42 gpm
Available flow at a single rear SCV 116 L/min
30.6 gpm

Key Specs

Engine description John Deere PowerTech™ PSS
Rated engine power 97/68EC: 184 kW
250 hp
Base machine weight 9300 kg
20,503 lb
Engine displacement 6.8 L
415 cu in.
Transmission type Infinitely variable transmission (IVT™), 0.05-42 km/h
0.03-26 mph
IVT, 0.05-50 km/h
0.03-31 mph
Rear hitch category (SAE designation) Standard: Category 3/3N: 7400 kg
16,300 lb
Maximum: 10,400 kg
22,900 lb
Maximum PTO power 253 hp
186 kW
Rated PTO power (hp SAE) 149 kW
203 hp
Maximum engine power 97/68EC: 202 kW
275 hp
Hydraulic pump rated output Standard: 85 cc pump: 160 L/min
42 gpm


Loader 680R
Maximum lift height 680R: 4480 mm
176 in.
Lift capacity at full height 680R: 2453 kg
5408 lb
680R: 4480 kg
176 lb


Country of manufacture Germany

Operator station

Instructional seat Standard
dB(A) rating 71 dB
Radio Standard
Cab suspension Optional: Adaptive Hydraulic Cab Suspension Plus (HCS Plus)
Cab glass area 6.11 m2
65.77 sq ft
Display LCD instrument cluster
Standard: CommandCenter™ display: 213.4 mm
8.4 in.
Optional: CommandCenter display: 254 mm
10 in.
Inner cab volume 3.33 m3
117.59 cu ft
Rollover protective structure, OOS Gearshift location - console/floor
Standard: CommandARM™ console
Seat Degree of seat swivel, left hand
7.5 degree
Degree of seat swivel, right hand
30 degree
Standard: Air suspension
Optional: Deluxe air suspension

Precision AG

Remote diagnostics Service ADVISOR™ Remote tool available with JDLink hardware and activations
Telematic Standard: JDLink™ system
Guidance Standard: AutoTrac™ assisted steering

Rear axle

Final drive type Inboard planetary three pinion
Differential controls Full-locking electrohydraulic
Type Standard: Flange, 1892 mm
74.5 in.
Optional: Rack and pinion, 2550 mm
100.4 in.
Rack and pinion, 3009
118.5 in.

Rear hitch

Sensing type Electrohydraulic
Rear axle differential lock Electrohydraulic
Remote control valves available Available: Remote control switch
Maximum lift capacity behind lift points 7000 kg
15,432 lb
Hitch category (SAE designation) Category 3/3N: 7000 kg
15,432 lb
Maximum: 10,400 kg
22,900 lb

Rear power take-off (PTO)

PTO actuation Electrical modulation
Engine rpm (at rated PTO speeds) 1950 engine rpm at 540/1000 rpm PTO
1761 engine rpm at 540E rpm PTO
1756 engine rpm at 1000E rpm PTO
Type Independent
Independent Standard: 45 mm (1.375 in) 540E, 1000, 1000E rpm reversible shaft
Optional: 35 mm (1.375 in) 540, 540E, 1000 rpm reversible shaft


Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours
Interval for engine oil change 750 hours


Type Hydrostatic power


Front 420/85R30
Rear 520/85R42 R1W
Wheel tread range MFWD: With TLS and brakes: 2370 in.
93.3 in.


Reverser Left-hand electrical reverser
Type Infinitely variable transmission (IVT™), 0.05-42 km/h
0.03-26 mph
IVT, 0.05-50 km/h
0.03-31 mph


Base machine weight Front axle
3700 kg
8157 lb
Rear axle
5600 kg
12,345 lb
9300 kg
21,100 lb
9300 kg
20,503 lb
Maximum permissible weight Flange axle: 15,000 kg
33,000 lb
Rack-and-pinion axle: 13,450 kg
29,652 lb

Additional information

Date collected 2-Oct-19