Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Cab

Compliance OSHA, SAE, ASAE
Visibility 360 degree (angle)
Noise rating 78 dBA
Doors Two
Seat equipment Air suspension with swivel
Air conditioning, temperature differential 14.4 °C
58 °F

Dimensions

Front axle clearance 35.1 cm
13.8 in.
Approximate shipping weight (open-station; cab) Open operator station (OOS) - 1710 kg
3770 lb
Cab - 2120 kg
4675 lb
Wheelbase 185.5 cm
73 in.
Turning radius with brakes 2.8 m
9.19 ft
Turning radius without brakes 3 m
9.84 ft

Electrical

Battery size 770 CCA
Alternator (12-V) 75 amp
Starter size 2 kW
2.68 hp

Engine

Manufacturer Yanmar
Engine model 4TNV86CT-MJT
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Number of cylinders Four
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element with electronic restriction indicator
Engine torque at rated speed 139 Nm
102.5 lb-ft
Fuel tank capacity Rollover protective structure (ROPS) - 56.9 L
15 U.S. gal.
Cab - 52.2 L
13.8 U.S. gal.
Cylinders/displacement 4 / 2.091 L
4 / 127.6 cu in.
Power take-off (PTO) power PowrReverser transmisison: 30.5 kW
40.8 hp
eHydro transmission: 29.2 kW
39.1 hp
Family EYDXL2.09TDA
FYDXL2.09TDA
GYDXL2.09TDA
Engine power (gross) SAE J1995 rated power: 37.9 kW
50.8 hp
51.5 PS at 2600 rpm
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.

Final drive

Type Planetary
Differential lock Yes

Fluid capacities

Crankcase with filter 5.3 L
1.4 qt
Transmission and hydraulic system 47.3 L
12.5 gal.

Fuel system

Type High pressure common rail direct injection

Hydraulics

Type Open center
Draft control sensing Position control
Remote control valves available Up to six rear remotes
Pump type Single gear
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2
65.8 L/min
17.4 gpm

Key Specs

Hitch type Category 1
Standard transmission; forward/reverse eHydro Transmission (eHST)
Cruise control Standard
Approximate shipping weight (open-station; cab) Open operator station (OOS) - 1710 kg
3770 lb
Cab - 2120 kg
4675 lb
Wheelbase 185.5 cm
73 in.
Steering hydraulics 23.5 L/min
6.2 gpm
Power take-off (PTO) power PowrReverser™ transmisison: 30.5 kW
40.8 hp
eHydro™ transmission: 29.2 kW
39.1 hp
Engine power (gross) SAE J1995 rated power: 37.9 kW
50.8 hp
51.5 PS at 2600 rpm
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb
Implement hydraulics 42.3 L/min
11.2 gpm

Operator station

Platform - flat/straddle Flat
Gear shift location - console/floor PRT - Left-hand side
Rollover protective structure Type
Foldable
Yes

Power take-off (PTO)

Control Independent
Clutch Wet disc
Standard Independent 540 rpm at 2600 rpm
Optional 540E rpm

Tires

Rear tread spacing 137.2 cm
54 in.
Rear Farm - 13.6-28
Turf - 44x18-20 or 22.5LL-16.1
Industrial - 16.9Lx24
Front Farm - 8-16
Turf - 27x10.5-15 or 27x12LL-15
Industrial - 10-16.5
Front tread range 148.1 cm
58.3 in.

Transmission

Final drive Planetary
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet
Cruise control Standard
Differential lock Yes
Optional transmission; forward/reverse 12/12 PowrReverser transmission (PRT)
Transmission gear ranges PRT - 12F/12R eHydro - Infinitely-variable 3 range
Standard transmission; forward/reverse eHydro transmission (eHST)
Creeper SpeedMatch standard
Left-hand reverser PRT only
Axle capacity Front
1600 kg
3528 lb
Rear
2400 kg
5292 lb
Clutch disk diameter wet clutch 129 mm
5.08 in.