Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Dimensions

Turning radius with brakes 2.8 m
9.19 ft
Turning radius without brakes 3 m
9.84 ft
Wheelbase 185.5 cm
73 in.
Front axle clearance 25.1 cm
13.8 in.
Approximate shipping weight (open-station; cab) Open station with hydrostatic transmission: 1664 kg
3668 lb
Cab with hydrostatic transmission: Not applicable
Open station with PowrReverser transmission: 1703 kg
3754 lb
Cab with PowerReverser: Not applicable

Electrical

Battery size 770 CCA
Alternator (12-V) 75 amp
Starter size 2 kW
2.68 hp

Engine

Engine model 4TNV86CT-MJT
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Number of cylinders Four
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element
Manufacturer Yanmar®
Engine torque at rated speed 139 Nm
102.5 lb-ft
Power take-off (PTO) power 29.2 kW
39.1 hp
Family EYDXL2.09TDA
FYDXL2.09TDA
GYDXL2.09TDA
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Engine power (gross) SAE J1995 rated power: 37.9 kW
50.8 hp
51.5 PS at 2600 rpm
Fuel tank capacity 56.9 L
15 U.S. gal.
Cylinders/displacement 4 / 2.091 L
4 / 127.6 cu in.

Final drive

Type Planetary
Differential lock Yes

Fluid capacities

Transmission and hydraulic system 47.3 L
12.5 gal.
Crankcase with filter 5.3 L
1.4 qt

Fuel system

Type High pressure common rail direct injection

Hydraulics

Type Open center
Draft control sensing Position control
Remote control valves available Up to three rear remotes
Pump type Single gear
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2 gpm
65.8 L/min
17.4 gpm

Key Specs

Cruise control Optional
Hitch type Category 1
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb
Standard transmission; forward/reverse PowrReverser transmission
Approximate shipping weight (open-station; cab) Open station with hydrostatic transmission: 1664 kg
3668 lb
Cab with hydrostatic transmission: Not applicable
Open station with PowrReverser transmission: 1703 kg
3754 lb
Cab with PowerReverser: Not applicable
Steering hydraulics 23.5 L/min
6.2 gpm
Power take-off (PTO) power 29.2 kW
39.1 hp
Engine power (gross) SAE J1995 rated power: 37.9 kW
50.8 hp
51.5 PS at 2600 rpm
Implement hydraulics 42.3 L/min
11.2 gpm
Wheelbase 185.5 cm
73 in.

Operator station

Platform - flat/straddle Flat
Gear shift location - console/floor PowrReverser - Left-hand side
Rollover protective structure Type
Foldable
Yes

Power take-off (PTO)

Control Position
Clutch Wet disc
Standard Independent 540 rpm at 2600 rpm

Tires

Rear tread spacing 137.2 cm
54 in.
Front Farm - 8-16
Turf - 27x10.5-15
Industrial - 10-16.5
Front tread range 148.1 cm
58.3 in.
Rear Farm - 13.6-28
Turf - 44x18-20 or 22.5LL-16.1
Industrial - 16.9Lx24

Transmission

Final drive Planetary
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet
Cruise control Optional
Differential lock Yes
Optional transmission; forward/reverse eHydro transmission
Standard transmission; forward/reverse PowrReverser transmission
Left-hand reverser PowrReverser transmission only
Axle capacity Front
1600 kg
3528 lb
Rear
2400 kg
5292 lb
Clutch disk diameter wet clutch 129 mm
5.08 in.
Transmission gear ranges PowrReverser: 12F/12R
eHydro: Infinitely-variable three range