4044R

  • John Deere
  • Compact Tractors 4 Series

Contact Your Preferred Store:

John Deere 4044R
Key Features & Specs
  • Naturally aspirated diesel engine
  • PowrReverser™ or eHydrostatic Transmission Options
  • Cab or Open Station configurations
  • Premium features: Hitch Assist, Aux Hitch Control, HST controls
  • HP 43.1
  • PTO HP 33.6
  • 2WD or 4WD 4WD
  • 3PT Hitch Category 1
  • Cab or Open Station Cab or Open Station
  • Transmission Type Hydrostatic – 3F/3R or PowrReverser™  12F/12R

Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Cab

Compliance OSHA, SAE, ASAE
Visibility 360 degree (angle)
Noise rating 78 dBA
Seat equipment Air suspension with swivel
Doors Two
Air conditioning, temperature differential 14.4 °C
58 °F

Dimensions

Turning radius without brakes 3 m
9.84 ft
Front axle clearance 35.1 cm
13.8 in.
Turning radius with brakes 2.8 m
9.17 ft
Wheelbase 185.5 cm
73 in.
Approximate shipping weight (open-station; cab) OOS - 1710 kg
3770 lb
Cab - 2120 kg
4675 lb

Electrical

Battery size 770 CCA
Alternator (12-V) 75 amp
Starter size 2 kW
2.68 hp

Engine

Manufacturer Yanmar
Engine model 4TNV88C-MJT
Rated engine speed 2600 rpm
Type Diesel
Aspiration Natural
Emissions compliance Final Tier 4
Number of cylinders Four
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element with electronic restriction indicator
Injection pump type High pressure common rail direct injection
Engine torque at rated speed 116 Nm
85.6 lb-ft
Power take-off (PTO) power PRT - 25 kW
33.6 hp
eHST - 24.1 kW
32.3 hp
SAE J1995
Family EYDXL2.19NDA
FYDXL2.19NDA
GYDXL2.19NDA
Engine power (gross) 31.7 kW
43.1 hp
PS at 2600 rpm
SAE J1995 rated power
Fuel tank capacity Rollover protective structure (ROPS) - 56.9 L
15 U.S. gal.
Cab - 52.2 L
13.8 U.S. gal.
Bore and stroke 88x90 mm
3.46x3.54 in.
Cylinders/displacement 4 / 2.189 L
4 / 133.5 cu in.

Final drive

Type Planetary
Differential lock Yes

Fluid capacities

Crankcase with filter 5.3 L
1.4 qt
Transmission and hydraulic system 47.3 L
12.5 gal.

Fuel system

Type High pressure common rail direct injection

Hydraulics

Type Open center
Draft control sensing Position control
Remote control valves available Up to six rear remotes
Pump type Single gear
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2 gpm
65.8 L/min
17.4 gpm

Key Specs

Engine power (gross) 31.7 kW
43.1 hp
PS at 2600 rpm
SAE J1995 rated power
Hitch type Category 1
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb
Cruise control Standard
Approximate shipping weight (open-station; cab) OOS - 1710 kg
3770 lb
Cab - 2120 kg
4675 lb
Wheelbase 185.5 cm
73 in.
Standard transmission; forward/reverse eHydro Transmission (eHST)
Power take-off (PTO) power PRT - 25 kW
33.6 hp
eHST - 24.1 kW
32.3 hp
Per SAE J1995
Implement hydraulics 42.3 L/min
11.2 gpm
Steering hydraulics 23.5 L/min
6.2 gpm

Operator station

Platform - flat/straddle Flat
Gear shift location - console/floor PRT - Left-hand side
Rollover protective structure Type
Foldable
Yes

Power take-off (PTO)

Control Position
Clutch Wet disc
Optional 540E rpm
Standard Independent
540 rpm at 2600 rpm

Tires

Front tread range 148.1 cm
58.3 in.
Rear Farm - 13.6-28
Turf - 44x18-20 or 22.5LL-16.1
Industrial - 16.9Lx24
Rear tread spacing 137.2 cm
54 in.
Front Farm - 8-16
Turf - 27x10.5-15 or 27x12LL-15
Industrial - 10-16.5

Transmission

Final drive Planetary
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet
Cruise control Standard
Differential lock Yes
Standard transmission; forward/reverse eHydro transmission (eHST)
Optional transmission; forward/reverse 12/12 PowrReverser transmission (PRT)
Left-hand reverser PRT only
Creeper SpeedMatch standard
Axle capacity Front
1600 kg
3528 lb
Rear
2400 kg
5292 lb
Clutch disk diameter wet clutch 129 mm
5.08 in.
Transmission gear ranges PRT - 12F/12R
eHydro - Infinitely-variable, 3 range