Key Features & Specs
- Standard 4wd for Maximum Traction
- Heavy duty drive train with a gear drive transmission 8F/8R
- On-board diagnostics including Service Advisor
- 3PT Hitch Category 1
- Transmission Type Gear - 8F/8R
- 2WD or 4WD 4WD
- Cab or Open Station Open Station
- HP* 42.2
- PTO HP 36
Specifications
3-point hitch
Type | Category 1 |
Lift capacity, 24-in. behind link arms | 944 kg 2081.2 lb |
Dimensions
Front axle clearance | Minimum: 331 mm 13 in. Maximum: 353 mm 13.9 in. |
Approximate shipping weight (open-station; cab) | OOS: 1288 kg 2840 lb Cab: Not applicable |
Turning radius with brakes | 1.63 m 5.3 ft |
Wheelbase | 1574 mm 62 in. |
Electrical
Battery size | 600 CCA |
Alternator (12-V) | 55 amp |
Starter size | 1.4 kW 1.9 hp |
Engine
Air cleaner | Dual element |
Aspiration | Turbocharged |
Injection pump type | High pressure common rail direct injection |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Lubrication | Pressurized |
Emissions compliance | Final Tier 4 |
Compression ratio | 19.1:1 |
Engine model | 3TNV86CT-KJPT |
Cooling system | Liquid |
Rated engine speed | 2800 rpm |
Power take-off (PTO) power | 27.1 kW 36.3 hp |
Engine torque at rated speed | 105.7 Nm 78 lb-ft |
Fuel tank capacity | 36.7 L 9.7 U.S. gal. |
Engine power (gross) | SAE J1995 rated power: 31 kW 41.6 hp 42.2 PS at 2800 rpm |
Cylinders/displacement | 3 / 1.57 L 3 / 95.8 cu in. |
Bore and stroke | 86 x 90 mm 3.39 x 3.54 in. |
Manufacturer | Yanmar® |
Final drive
Type | Spur gear |
Fluid capacities
Transmission and hydraulic system | 33 L 34.8 qt |
Crankcase with filter | 4.5 L 4.8 qt |
Fuel system
Type | High pressure common rail direct injection |
Hydraulics
Type | Open center |
Remote control valves available | Up to two (optional) |
Pump type | Single gear |
Draft control sensing | Position control |
Maximum operating pressure | 172 bar 2495 psi |
Pump rated output | Steering 16.8 L/min 4.4 gpm Implement 22.4 L/min 5.9 gpm 39.2 L/min 10.3 gpm |
Key Specs
Cruise control | No |
Hitch type | Category 1 |
Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
Lift capacity, 24-in. behind link arms | 944 kg 2081.2 lb |
Power take-off (PTO) power | 27.1 kW 36.3 hp |
Wheelbase | 1574 mm 62 in. |
Engine power (gross) | SAE J1995 rated power: 31 kW 41.6 hp 42.2 PS at 2800 rpm |
Approximate shipping weight (open-station; cab) | Open operator station (OOS): 1288 kg 2840 lb Cab: Not applicable |
Implement hydraulics | 22.4 L/min 5.9 gpm |
Steering hydraulics | 16.8 L/min 4.4 gpm |
Miscellaneous
Toolbox | Yes |
12-V Outlet | No |
Tilt steering wheel | No |
Operator station
Gear shift location - console/floor | Right-hand side |
Platform - flat/straddle | Straddle |
Rollover protective structure | Type Foldable ASABE S478 |
Power take-off (PTO)
Control | Mechanical |
Clutch | Transmission |
Brake (for mid and rear PTO) | Wet disk |
Standard | At 2400 rpm: 540 rpm |
Tires
Front | R1 Bar: 7-14 R3 Turf: 27x8.5-15 R4 Industrial: 25x8.5-14 |
Rear | R1 Bar: 11.2-24 R3 Turf: 41x14-20 R4 Industrial: 15-19.5 |
Transmission
Creeper | No |
Final drive | Spur Gear |
Left-hand reverser | Yes |
Differential lock | Yes |
Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
Cruise control | No |
Steering | Power steering |
Brakes | Wet disk |
Transmission gear ranges | Four gears and two ranges |
Axle capacity | Front 880 kg 1940 lb Rear 1600 kg 3527 lb |