Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb

Cab

Visibility 360 degree (angle)
Doors Two
Noise rating 80 dBA
Seat equipment Scissor-link
Compliance Complies with OSHA, SAE, and CSA standards for rollover protection

Dimensions

Wheelbase 1727 mm
68 in.
Turning radius with brakes 2.7 m
8.8 ft
Approximate shipping weight (open-station; cab) OOS PowrReverser transmission: 1363 kg
3005 lb
OOS eHydro trasmission: 1382 kg
3047 lb
Cab eHydro transmission only: 1676 kg
3695 lb
Front axle clearance Minimum: 171 mm
6.7 in.
Maximum: 299 mm
11.8 in.
Turning radius without brakes 2.8 m
9.2 ft

Electrical

Battery size 500 CCA
Alternator (12-V) 75 amp
Starter size 1.4 kW
1.9 hp

Engine

Engine model 3TNV86CT-MJT
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Number of cylinders Three
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Engine power (gross) SAE J1995 rated power: 28.5 kW
38.2 hp
38.7 PS at 2600 rpm
Fuel tank capacity OOS: 37.4 L
10 U.S. gal.
Cab eHydro transmission only: 47.6 L
12.6 U.S. gal.
Cylinders/displacement Three cylinders: 1.57 L
95.7 cu in.
Power take-off (PTO) power PowrReverser transmission: 24.4 kW
32.8 hp
eHydro transmission: 22.2 kW
29.8 hp
Engine torque at rated speed 105 Nm
77.4 lb-ft
Manufacturer Yanmar®

Final drive

Type Spur gear

Fluid capacities

Crankcase with filter 4.3 L
4.5 qt
Transmission and hydraulic system PowrReverser transmission: 24.6 L
6.5 U.S. gal.
eHydro transmission: 26.5 L
7 gal.
Cab eHydro transmission only: 26.5 L

Fuel system

Type High pressure common rail direct injection

Hydraulics

Draft control sensing Position control
Type Open center
Remote control valves available Up to six rear remotes
Pump type Single gear
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
34.3 L/min
9.1 gpm
57.8 L/min
15.3 gpm
Maximum operating pressure 172 bar
2495 psi

Key Specs

Hitch type Category 1
Standard transmission; forward/reverse PowrReverser transmission
Cruise control PowrReverser transmission: Not applicable
eHydro transmission: Standard
Power take-off (PTO) power PowrReverser™ transmission: 24.4 kW
32.8 hp
eHydro™ transmission: 22.2 kW
29.8 hp
Steering hydraulics 23.5 L/min
6.2 gpm
Lift capacity, 24-in. behind link arms 995 kg
2194 lb
Engine power (gross) SAE J1995 rated power: 28.5 kW
38.2 hp
38.7 PS at 2600 rpm
Wheelbase 1727 mm
68 in.
Implement hydraulics 34.3 L/min
9.1 gpm
Approximate shipping weight (open-station; cab) Open operator station (OOS) PowrReverser transmission: 1363 kg
3005 lb
OOS eHydro trasmission: 1382 kg
3047 lb
Cab eHydro transmission only: 1676 kg
3695 lb

Operator station

Platform - flat/straddle One-piece semi flat
Rollover protective structure Type
Foldable
Gear shift location - console/floor PowrReverser transmission: Right-hand side
eHydro transmission: Not applicable

Power take-off (PTO)

Brake (for mid and rear PTO) Wet disk
Clutch Wet disk
Control Lever and switch
Standard Independent rear: 540 rpm
Optional PowrReverser transmission: Mid - not applicable
eHydro transmission: Mid - 2100 rpm

Tires

Rear tread spacing 1031 mm
40.6 in.
Rear R1 Bar: 11.2-24
R3 Turf: 41x14-20
R3 Turf Special: 41x18LL-16.1
R4 Industrial: 15-19.5 or 43x16-20
Front R1 Bar: 7-14
R3 Turf : 27x8.50-15
R3 Turf Special: 25/10.5LLx15
R4 Industrial: 25x8.5-14 or 27x8.5-15
Front tread range 1117 mm
44 in.

Transmission

Steering Hydrostatic power steering
Brakes Wet disk
Standard transmission; forward/reverse PowrReverser transmission; 12F/12R
Clutch, wet/dry PowrReverser transmission: Wet disk
Final drive Spur gear
Optional transmission; forward/reverse eHydro transmission
Left-hand reverser PowrReverser transmission only
Cruise control PowrReverser transmission: Not applicable
eHydro transmission: Standard
Transmission gear ranges PowrReverser transmission: 12F/12R
eHydro transmission: three-range, infinitely variable
Axle capacity Front
1450 kg
3197 lb
Rear
1850 kg
4079 lb