Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 944 kg
2081.2 lb

Dimensions

Front axle clearance Minimum: 331 mm
13 in.
Maximum: 353 mm
13.9 in.
Wheelbase 1574 mm
62 in.
Turning radius with brakes 1.63 m
5.3 ft
Approximate shipping weight (open-station; cab) OOS: 1275 kg
2811 lb
Cab: Not applicable

Electrical

Battery size 600 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp

Engine

Aspiration Natural
Air cleaner Dual element
Injection pump type High pressure common rail direct injection
Number of cylinders Three
Cylinder liners Cast-in-block
Lubrication Pressurized
Emissions compliance Final Tier 4
Compression ratio 19.1:1
Engine model 3TNV88C-KJPT
Rated engine speed 2800 rpm
Cooling system Liquid
Power take-off (PTO) power 22.7 kW
30.4 hp
Manufacturer Yanmar®
Engine torque at rated speed 87 Nm
64.2 lb-ft
Engine power (gross) SAE J1995 rated power: 25.5 kW
34.2 hp
34.7 PS at 2800 rpm
Bore and stroke 88 x 90 mm
3.46 x 3.54 in.
Cylinders/displacement 3 / 1.64 L
3 / 100.2 cu in.
Fuel tank capacity 36.7 L
9.7 U.S. gal.

Final drive

Type Spur gear

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt
Transmission and hydraulic system 33 L
34.8 qt

Fuel system

Type High pressure common rail direct injection

Hydraulics

Draft control sensing Position control
Type Open center
Remote control valves available Up to two (optional)
Pump type Single gear
Pump rated output Steering
16.8 L/min
4.4 gpm
Implement
22.4 L/min
5.9 gpm
39.2 L/min
10.3 gpm
Maximum operating pressure 172 bar
2495 psi

Key Specs

Cruise control No
Hitch type Category 1
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Steering hydraulics 16.8 L/min
4.4 gpm
Lift capacity, 24-in. behind link arms 944 kg
2081.2 lb
Approximate shipping weight (open-station; cab) Open operator station (OOS): 1275 kg
2811 lb
Cab: Not applicable
Power take-off (PTO) power 22.7 kW
30.4 hp
Wheelbase 1574 mm
62 in.
Implement hydraulics 22.4 L/min
5.9 gpm
Engine power (gross) SAE J1995 rated power: 25.5 kW
34.2 hp
34.7 PS at 2800 rpm

Miscellaneous

Toolbox Yes
12-V Outlet No
Tilt steering wheel No

Operator station

Gear shift location - console/floor Right-hand side
Platform - flat/straddle Straddle
Rollover protective structure Type
Foldable
ASABE S478

Power take-off (PTO)

Control Mechanical
Clutch Transmission
Brake (for mid and rear PTO) Wet disk
Standard At 2400 rpm: 540 rpm

Tires

Rear R1 Bar: 11.2-24
R3 Turf: 41x14-20
R4 Industrial: 15-19.5
Front R1 Bar: 7-14
R3 Turf: 27x8.5-15
R4 Industrial: 25x8.5-14

Transmission

Creeper No
Final drive Spur Gear
Left-hand reverser Yes
Differential lock Yes
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Cruise control No
Steering Power steering
Brakes Wet disk
Transmission gear ranges Four gears and two ranges
Axle capacity Front
880 kg
1940 lb
Rear
1600 kg
3527 lb