Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 995 kg
2194 lb

Cab

Visibility 360 degree (angle)
Doors Two
Noise rating 80 dBA
Seat equipment Scissor-link
Compliance Complies with OSHA, SAE, and CSA standards for rollover protection

Dimensions

Front axle clearance Minimum: 171 mm
6.7 in.
Maximum: 299 mm
11.8 in.
Approximate shipping weight (open-station; cab) OOS: 1353 kg
2983 lb
Cab: 1633 kg
3600 lb
Turning radius with brakes 2.7 m
8.8 ft
Wheelbase 1727 mile
68 in.
Turning radius without brakes 2.8 m
9.2

Electrical

Battery size 500 CCA
Alternator (12-V) 75 amp
Starter size 1.4 kW
1.9 hp

Engine

Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Natural
Emissions compliance Final Tier 4
Number of cylinders Three
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element
Engine model 3TNV88C-MJTV
Engine power (gross) SAE J1995 rated power: 23.7 kW
31.8 hp
32.2 PS at 2600 rpm
Fuel tank capacity OOS: 37.4 L
10 U.S. gal.
Cab eHydro transmission only: 47.6 L
12.6 U.S. gal.
Engine torque at rated speed 87 Nm
64.2 lb-ft
Manufacturer Yanmar®
Bore and stroke 88x90 mm
3.46x3.54 in.
Cylinders/displacement Three cylinders: 1.64 L
100 cu in.
Power take-off (PTO) power PowrReverser transmission: 19.5 kW
26.1 hp
eHydro transmission: 17.2 kW
23 hp

Final drive

Type Spur gear

Fluid capacities

Crankcase with filter 4.3 L
4.5 qt
Transmission and hydraulic system PowrReverser transmission: 24.6 L
6.5 U.S. gal.
eHydro transmission: 26.5 L
7 gal.
Cab eHydro transmission only: 26.5 L

Fuel system

Type High pressure common rail direct injection

Hydraulics

Type Open center
Draft control sensing Position control
Pump type Single gear
Remote control valves available Up to six rear remotes
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
34.28 L/min
9.1 gpm
57.8 L/min
15.3 gpm
Maximum operating pressure 172 bar
2495 psi

Key Specs

Hitch type Category 1
Standard transmission; forward/reverse PowrReverser transmission
Power take-off (PTO) power PowrReverser™ transmission: 19.5 kW
26.1 hp
eHydro™ transmission: 17.2 kW
23 hp
Per SAE J1995
Engine power (gross) SAE J1995 rated power: 23.7 kW
31.8 hp
32.2 PS at 2600 rpm
Approximate shipping weight (open-station; cab) Open operator station (OOS): 1353 kg
2983 lb
Cab: 1633 kg
3600 lb
Lift capacity, 24-in. behind link arms 995 kg
2194 lb
Cruise control PowrReverser transmission: Not applicable
eHydro transmission: Standard
Steering hydraulics 23.5 L/min
6.2 gpm
Wheelbase 1727 mm
68 in.
Implement hydraulics 34.3 L/min
9.1 gpm

Operator station

Platform - flat/straddle One-piece semi flat
Rollover protective structure Type
Foldable
Gear shift location - console/floor PowrReverser transmission: Right-hand side
eHydro transmission: Not applicable

Power take-off (PTO)

Control Lever and switch
Brake (for mid and rear PTO) Wet disk
Standard Independent rear: 540 rpm
Clutch Wet disk
Optional PowrReverser transmission: Mid - not applicable
eHydro transmission: Mid - 2100 rpm

Tires

Rear tread spacing 1031 mm
40.6 in.
Rear R1 Bar: 11.2-24
R3 Turf: 41x14-20
R3 Turf Special: 41x18LL-16.1
R4 Industrial: 15-19.5 or 43x16-20
Front tread range 1117 mm
44 in.
Front R1 Bar: 7-14
R3 Turf : 27x8.50-15
R3 Turf Special: 25/10.5LLx15
R4 Industrial: 25x8.5-14 or 27x8.5-15

Transmission

Steering Hydrostatic power steering
Differential lock Yes
Brakes Multi-plate wet disk
Standard transmission; forward/reverse PowrReverser transmission; 12F/12R
Clutch, wet/dry PowrReverser transmission: Wet disk
Optional transmission; forward/reverse eHydro transmission
Left-hand reverser PowrReverser transmission only
Final drive Spur gear
Transmission gear ranges PowrReverser transmission: 12F/12R
eHydro transmission: three-range, infinitely variable
Cruise control PowrReverser transmission: Not applicable
eHydro transmission: Standard
Axle capacity Front
1450 kg
3197 lb
Rear
1850 kg
4079 lb