Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 615.1 kg
1356 lb

Dimensions

Front axle clearance 36.3 cm
14.3 in.
Turning radius without brakes 2.9 m
9.4 ft
Wheelbase 159.5 cm
62.8 in.
Approximate shipping weight (open-station; cab) 1007.9 kg
2222 lb

Electrical

Battery size 500 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp

Engine

Manufacturer Yanmar
Engine model 3TNV88C-NJT
Rated engine speed 2500 rpm
Injection pump type High pressure common rail direct injection
Aspiration Natural
Emissions compliance Final Tier 4
Number of cylinders Three
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element
Type Diesel
Engine torque at rated speed 87 Nm
64.2 lb-ft
Cylinders/displacement 3 / 1.64 L
3 / 100.2 cu in.
Power take-off (PTO) power 18.6 kW
25 hp
Engine power (gross) 22.9 kW
31.2 hp
Family EYDXL1.64NDA
FYDXL1.64NDA
GYDXL1.64NDA
Fuel tank capacity 28.5 L
7.5 U.S. gal.
Bore and stroke 88 x 90 mm
3.46 x 3.54 in.

Final drive

Type Bull Gear

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt

Fuel system

Type High pressure common rail direct injection

Hydraulics

Type Open center
Pump type Dual gear
Draft control sensing Position control
Remote control valves available Up to two (optional)
Pump rated output Steering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Maximum operating pressure 172.4 bar
2500 psi

Key Specs

Standard transmission; forward/reverse Hydrostatic transmission (HST)
Cruise control Optional
Hitch type Category 1
Wheelbase 159.5 cm
62.8 in.
Implement hydraulics 20.2 L/min
5.3 gpm
Power take-off (PTO) power 18.6 kW
25 hp
Steering hydraulics 15 L/min
4 gpm
Engine power (gross) 22.9 kW
31.2 hp
Approximate shipping weight (open-station; cab) 1007.9 kg
2222 lb
Lift capacity, 24-in. behind link arms 615.1 kg
1356 lb

Operator station

Platform - flat/straddle Semi-flat
Gear shift location - console/floor Left-hand side
Rollover protective structure Type
Foldable
ASABE S478

Power take-off (PTO)

Standard 540 rpm at 2500 rpm
Control Independent
Brake (for mid and rear PTO) Wet disk
Clutch Wet disk

Tires

Rear Farm - 11.2-24
Turf - 41x14-20
R4 - 15-19.5
R4 - 43x16-20
Front Farm - 7-14
Turf - 27x8.5-15
R4 - 25x8.5-14
R4 - 27x8.5-15

Transmission

Standard transmission; forward/reverse Hydrostatic transmission (HST)
Final drive Bull Gear
Brakes Wet disc
Steering Power steering
Creeper No
Cruise control Optional
Differential lock Yes
Left-hand reverser No
Axle capacity Front
798 kg
1760 lb
Rear
1197 kg
2640 lb