Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 615.1 kg
1356 lb

Dimensions

Approximate shipping weight (open-station; cab) 1007.9 kg
2222 lb
Turning radius without brakes 2.9 m
9.4 ft
Front axle clearance 36.3 cm
14.3 in.
Wheelbase 159.5 cm
62.8 in.

Electrical

Battery size 500 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp

Engine

Manufacturer Yanmar
Rated engine speed 2400 rpm
Injection pump type Direct injection
Aspiration Natural
Emissions compliance Final Tier 4
Number of cylinders Three
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element
Engine model 3TNV88F-EPJT2
Type Diesel
Family EYDXL1.64NDA
FYDXL1.64NDA
GYDXL1.64NDA
Engine torque at rated speed 72.4 Nm
53.4 lb-ft
Cylinders/displacement 3 / 1.64 L
3 / 100.2 cu in.
Engine power (gross) 18.2 kW
24.7 hp
Bore and stroke 88 x 90 mm
3.46 x 3.54 in.
Power take-off (PTO) power 14.4 kW
19.4 hp
Fuel tank capacity 28.5 L
7.5 U.S. gal.

Final drive

Type Bull Gear

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt
Transmission and hydraulic system 22 L
23.2 qt

Fuel system

Type Direct injection

Hydraulics

Type Open center
Pump type Dual gear
Draft control sensing Position control
Remote control valves available Up to two (optional)
Maximum operating pressure 172.4 bar
2500 psi
Pump rated output Steering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm

Key Specs

Standard transmission; forward/reverse Hydrostatic transmission (HST)
Cruise control Optional
Hitch type Category 1
Lift capacity, 24-in. behind link arms 615.1 kg
1356 lb
Power take-off (PTO) power 14.4 kW
19.4 hp
Steering hydraulics 15 L/min
4 gpm
Approximate shipping weight (open-station; cab) 1007.9 kg
2222 lb
Wheelbase 159.5 cm
62.8 in.
Engine power (gross) 18.2 kW
24.7 hp
Implement hydraulics 20.2 L/min
5.3 gpm

Operator station

Platform - flat/straddle Semi-flat
Gear shift location - console/floor Left-hand side
Rollover protective structure Type
Foldable
ASABE S478

Power take-off (PTO)

Control Independent
Standard Rear - 540 rpm
Brake (for mid and rear PTO) Wet disk
Clutch Wet disk

Tires

Rear Farm - 11.2-24
Turf - 41x14-20
R4 - 15-19.5
R4 - 43x16-20
Front Farm - 7-14
Turf - 27x8.5-15
R4 - 25x8.5-14
R4 - 27x8.5-15

Transmission

Standard transmission; forward/reverse Hydrostatic transmission (HST)
Final drive Bull Gear
Brakes Wet disc
Steering Power steering
Creeper No
Cruise control Optional
Differential lock Yes
Left-hand reverser No
Axle capacity Front
798 kg
1760 lb
Rear
1197 kg
2640 lb