Key Features & Specs
- Compatible with the 60D and 72D AutoConnect™ drive-over mower decks
- Standard 4WD, cruise control, folding ROPS
- iMatch™ compatible
- 3PT Hitch Category 1
- Cab or Open Station Open Station
- 2WD or 4WD 4WD
-
HP
31.2*
- Transmission Type Hydrostatic
-
PTO HP
24.2
Specifications
3-point hitch
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
Dimensions
| Approximate shipping weight (open-station; cab) | Open station: 1306 kg 2879 lb Cab: Not applicable |
| Wheelbase | 1723 mm 67.8 in. |
| Turning radius with brakes | 2.46 m 8.07 ft |
Electrical
| Alternator (12-V) | 85 amp |
| Battery size | 500 CCA |
| Starter size | 1.4 kW 1.9 hp |
Engine
| Compression ratio | 19.1:1 |
| Emissions compliance | Final Tier 4 |
| Cylinder liners | Cast-in-block |
| Aspiration | Natural |
| Injection pump type | Direct Injection |
| Type | Direct Injection |
| Air cleaner | Dual element |
| Lubrication | Pressurized |
| Rated engine speed | 2500 rpm |
| Cooling system | Water pump |
| Number of cylinders | Three |
| Engine model | 3TNV88C-NJT2 |
| Engine torque at rated speed | 87.5 Nm 64.5 lb-ft |
| Cylinders/displacement | Three cylinders: 1.642 L 100.2 cu in. |
| Power take-off (PTO) power | 18 kW 24.2 hp |
| Manufacturer | Yanmar® |
| Engine power (gross) | SAE J1995 rated power: 22.9 kW 30.7 hp 31.2 PS at 2500 rpm |
| Bore and stroke | 88x90 mm 3.46x3.54 in. |
| Fuel tank capacity | 32 L 8.5 U.S. gal. |
Final drive
| Type | Spur Gear |
| Differential lock | Yes |
Fluid capacities
| Crankcase with filter | 4.5 L 4.8 qt |
Fuel system
| Type | Direct Injection |
Hydraulics
| Draft control sensing | Position control |
| Remote control valves available | Up to three |
| Type | Open center |
| Pump type | Dual gear |
| Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
| Maximum operating pressure | 172 bar 2495 psi |
Key Specs
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Cruise control | Standard |
| Hitch type | Category 1 |
| Wheelbase | 1723 mm 67.8 in. |
| Engine power (gross) | SAE J1995 rated power: 22.9 kW 30.7 hp 31.2 PS at 2500 rpm |
| Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
| Steering hydraulics | 15 L/min 4 gpm |
| Power take-off (PTO) power | 18 kW 24.2 hp |
| Approximate shipping weight (open-station; cab) | Open station: 1306 kg 2879 lb Cab: Not applicable |
| Implement hydraulics | 20.2 L/min 5.3 gpm |
Miscellaneous
| 12-V Outlet | Yes |
| Toolbox | Yes |
| Tilt steering wheel | Yes |
Operator station
| Platform - flat/straddle | Semi-flat |
| Rollover protective structure | Type Foldable ASABE S478 |
Power take-off (PTO)
| Brake (for mid and rear PTO) | Wet disc |
| Control | Independent |
| Clutch | Wet disc |
| Standard | Rear: 543 rpm Mid: 1998 rpm |
Tires
| Front | R1 Ag 7.00-12 R3 Turf 23x8.50-14 R4 Industrial 23x8.50-14 R3 Turf Radial 200/60 R15 |
| Rear | R1 Ag 12.4-16 R3 Turf 14-17.5 R4 Industrial 14-17.5 R3 Turf Radial 300/70 R20 |
Transmission
| Differential lock | Yes |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Cruise control | Standard |
| Creeper | No |
| Steering | Power steering |
| Brakes | Wet disc |
| Final drive | Spur gear |
| Axle capacity | Front 880 kg 1940 lb Rear 1800 kg 3968 lb |
John Deere 2032R Image Gallery

