Bargain Barn
Key Features & Specs
- Powerful and fuel-efficient Tier IV Yanmar engine
- Hydro transmission with TwinTouch™ pedals for ease of use
- AutoConnect™ 7-Iron Drive-over mower decks up to 60 inches
- Transmission Type Hydrostatic - 2 Range
- PTO HP 18
- Cab or Open Station Open Station
- 3PT Hitch Category 1
- HP 24.2*
- 2WD or 4WD 4WD
Specifications
3-point hitch
| Type | Limited Category 1 |
| Lift capacity, 24-in. behind link arms | 400 kg 882 lb |
Dimensions
| Limited slip differential | No |
| Approximate shipping weight (open-station; cab) | 813.5 kg 1793.4 lb |
| Turning radius without brakes | 2.65 m 8.7 ft |
| Wheelbase | 1600 mm 63 in. |
| Front axle clearance | 316 mm 12.5 in. |
Electrical
| Battery size | 500 CCA |
| Alternator (12-V) | 40 amp |
| Starter size | 1.2 kW 1.6 hp |
Engine
| Cylinder liners | Cast-in-block |
| Aspiration | Natural |
| Air cleaner | Dual element |
| Rated engine speed | 3200 rpm |
| Engine model | 3TNV80F-NCJT |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Type | Diesel |
| Compression ratio | 23:01 |
| Manufacturer | Yanmar |
| Number of cylinders | Three |
| Emissions compliance | Final Tier 4 |
| Injection pump type | Indirect injection |
| Family | GYDXL1.27NS1 HYDXL1.27NS1 |
| Engine power (gross) | 17.8 kW 23.9 hp SAE J1995 rated power |
| Engine torque at rated speed | 53 Nm 39.09 lb-ft |
| Power take-off (PTO) power | 13.4 kW 18 hp |
| Cylinders/displacement | 3 / 1.267 L 3 / 77 cu in. |
| Bore and stroke | 80 x 84 mm 3.2 x 3.3 in. |
| Fuel tank capacity | 20.4 L 5.39 gal. |
Final drive
| Differential lock | Yes |
| Type | Spur Gear |
Fluid capacities
| Crankcase with filter | 2.7 L 2.9 qt |
Fuel system
| Type | Indirect injection |
| Fuel consumption | 5.8 L/hr 1.5 U.S. gal./hr |
Hydraulics
| Remote control valves available | Two |
| Pump type | Gear |
| Draft control sensing | Position control |
| Type | Open center |
| Maximum operating pressure | 148.2 bar 2150 psi |
| Pump rated output | Steering 13.25 L/min 3.5 gpm Implement 13.25 L/min 3.5 gpm 26.5 L/min 7 gpm |
Key Specs
| Standard transmission; forward/reverse | Hydrostatic - 2 range |
| Cruise control | Standard |
| Hitch type | Limited Category 1 |
| Engine power (gross) | 17.8 kW 23.9 hp SAE J1995 rated power |
| Wheelbase | 1600 mm 63 in. |
| Lift capacity, 24-in. behind link arms | 400 kg 882 lb |
| Implement hydraulics | 13.25 L/min 3.5 gpm |
| Approximate shipping weight (open-station; cab) | 813.5 kg 1793.4 lb |
| Steering hydraulics | 13.25 L/min 3.5 gpm |
| Power take-off (PTO) power | 13.4 kW 18 hp |
Miscellaneous
| Toolbox | Yes |
| Tilt steering wheel | Yes |
| 12-V Outlet | Yes |
Operator station
| Platform - flat/straddle | Three-piece semi flat |
| Gear shift location - console/floor | Left-hand side |
| Rollover protective structure | Type Foldable OSHA, SAE, ASAE |
Power take-off (PTO)
| Clutch | Wet disc |
| Control | Independent |
| Brake (for mid and rear PTO) | Wet disc |
| Standard | Rear - 540 rpm Mid - 2100 rpm |
Tires
| Rear | R3 Turf - 31x13.5-15 R4 Industrial - 12-16.5 R3 Radial - 280/70-R16 |
| Front tread range | 95.3 cm 37.5 in. |
| Front | R3 Turf - 23x8.50-12 R4 Industrial - 23x8.50-12 R3 Radial - 220/55-R12 |
Transmission
| Cruise control | Standard |
| Brakes | Wet disc |
| Differential lock | Yes |
| Left-hand reverser | No |
| Steering | Power steering |
| Final drive | Spur Gear |
| Standard transmission; forward/reverse | Hydrostatic - 2 range |
| Creeper | No |
| Axle capacity | Front 612 kg 1349 lb Rear 1100 kg 2425 lb |
