Key Features & Specs
- Powerful Tier 4-compliant diesel engine
- Premium Operator Station with ergonomic seat, armrests and fender lights
- AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
- 3PT Hitch Category 1
- HP 23.9*
- PTO HP 18
- Transmission Type Hydrostatic - 2 Range
- Cab or Open Station Open Station or Cab (optional)
- 2WD or 4WD 4WD
Specifications
3-point hitch
| Type | Limited Category 1 |
| Lift capacity, 24-in. behind link arms | 344 kg 758 lb |
Cab
| Doors | Two |
| Seat equipment | Premium seat |
| Air conditioning, temperature differential | Heat only |
Dimensions
| Limited slip differential | No |
| Wheelbase | 1450 mm 57.1 in. |
| Turning radius without brakes | Outside front tire: 2.51 m 8.2 ft |
| Front axle clearance | 195 mm 7.7 in. |
| Approximate shipping weight (open-station; cab) | Open station: 706 kg 1556 lb Cab: 906 kg 1996 lb |
Electrical
| Alternator (12-V) | 40 amp |
| Battery size | 500 CCA |
| Starter size | 1.2 kW 1.6 hp |
Engine
| Type | Diesel |
| Compression ratio | 23.1:1 |
| Injection pump type | Indirect injection |
| Rated engine speed | 3200 rpm |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Aspiration | Natural |
| Number of cylinders | Three |
| Engine model | 3TNV80F-NCJT |
| Emissions compliance | Final Tier 4 |
| Cylinder liners | Cast-in-block |
| Air cleaner | Dual element with mechanical restriction indicator |
| Engine power (gross) | SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 seconds |
| Bore and stroke | 80 x 84 mm 3.15 x 3.31 in. |
| Engine torque at rated speed | 53.1 Nm 39.2 lb-ft |
| Power take-off (PTO) power | 12.8 kW 17.2 hp |
| Manufacturer | Yanmar® |
| Fuel tank capacity | 24 L 6.3 U.S. gal. |
| Cylinders/displacement | Three cylinders: 1.267 L 77.3 cu in. |
Final drive
| Differential lock | Yes |
| Type | Spur gear |
Fluid capacities
| Crankcase with filter | 2.7 L 2.9 qt |
| Transmission and hydraulic system | 12.3 L 3.2 gal. |
Fuel system
| Type | Indirect injection |
Hydraulics
| Pump type | Single gear |
| Remote control valves available | Three |
| Type | Open center |
| Draft control sensing | Position control |
| Pump rated output | Steering 13.2 L/min 3.5 gpm Implement 13.2 L/min 3.5 gpm 24 L/min 6.3 gpm |
| Maximum operating pressure | 138 bar 2000 psi |
Key Specs
| Standard transmission; forward/reverse | Hydrostatic - two range |
| Cruise control | Standard |
| Hitch type | Limited Category 1 |
| Wheelbase | 1450 mm 57.1 in. |
| Power take-off (PTO) power | 12.8 kW 17.2 hp |
| Implement hydraulics | 13.2 L/min 3.5 gpm |
| Lift capacity, 24-in. behind link arms | 344 kg 758 lb |
| Steering hydraulics | 13.2 L/min 3.5 gpm |
| Engine power (gross) | SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm |
| Approximate shipping weight (open-station; cab) | Open station: 706 kg 1556 lb Cab: 906 kg 1996 lb |
Miscellaneous
| Toolbox | Yes |
Operator station
| Gear shift location - console/floor | Left-hand side |
| Platform - flat/straddle | One-piece semi flat |
| Rollover protective structure | Type Foldable Yes |
Power take-off (PTO)
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Control | Independent |
| Standard | Rear: 540 rpm Mid: 2100 rpm |
Tires
| Front | R3 Turf: 18x8.50-10 R3 Turf Radial: 18x8.50-10 R4: 18x8.5-10 |
| Rear | R3 Turf: 26x12-12 R4: 26x12-12 |
| Front tread range | 931 mm 36.7 in. |
| Rear tread spacing | 895 mm 35.2 in. |
Transmission
| Cruise control | Standard |
| Creeper | No |
| Steering | Power |
| Left-hand reverser | No |
| Differential lock | Yes |
| Final drive | Spur gear |
| Brakes | Wet disc (left-hand pedal) |
| Standard transmission; forward/reverse | Hydrostatic - two range |
| Axle capacity | Front 612 kg 1349 lb Rear 715 kg 1576 lb |
John Deere 1025R Image Gallery

