Specifications

3-point hitch

Type Limited Category 1
Lift capacity, 24-in. behind link arms 344 kg
758 lb

Dimensions

Limited slip differential No
Approximate shipping weight (open-station; cab) Open station: 656 kg
1446 lb
Cab: Not applicable
Wheelbase 1450 mm
57.1 in.
Front axle clearance 195 mm
7.7 in.
Turning radius without brakes Outside front tire: 2.51 m
8.2 ft

Electrical

Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp

Engine

Engine model 3TNM74F-NCJT
Compression ratio 23.5:1
Air cleaner Dual element
Aspiration Natural
Cooling system Water pump
Injection pump type Indirect injection
Number of cylinders Three
Cylinder liners Cast-in-block
Lubrication Pressurized
Rated engine speed 3200 rpm
Emissions compliance Final Tier 4
Type Diesel
Cylinders/displacement Three cylinders: 0.993 L
60.6 cu in.
Bore and stroke 74 x 77 mm
2.91 x 3.03 in.
Manufacturer Yanmar®
Engine torque at rated speed 47.7 Nm
35.2 lb-ft
Power take-off (PTO) power 11.1 kW
14.9 hp
Fuel tank capacity 24 L
6.3 U.S. gal.
Engine power (gross) SAE J1995 rated power: 16 kW
21.5 hp
21.8 PS at 3200 rpm

Final drive

Type Spur gear
Differential lock Yes

Fluid capacities

Crankcase with filter 2.7 L
2.9 qt
Transmission and hydraulic system 12.3 L
3.2 gal.

Fuel system

Type Indirect injection

Hydraulics

Draft control sensing Select control
Type Open center
Remote control valves available Three
Pump type Single gear
Pump rated output Steering
13.2 L/min
3.5 gpm
Implement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Maximum operating pressure 138 bar
2000 psi

Key Specs

Cruise control No
Hitch type Limited Category 1
Standard transmission; forward/reverse Hydrostatic - two range
Power take-off (PTO) power 11.1 kW
14.9 hp
Steering hydraulics 13.2 L/min
3.5 gpm
Engine power (gross) SAE J1995 rated power: 16 kW
21.5 hp
21.8 PS at 3200 rpm
Lift capacity, 24-in. behind link arms 344 kg
758 lb
Implement hydraulics 13.2 L/min
3.5 gpm
Approximate shipping weight (open-station; cab) Open station: 656 kg
1446 lb
Cab: Not applicable
Wheelbase 1450 mm
57.1 in.

Miscellaneous

Toolbox Yes

Operator station

Gear shift location - console/floor Left-hand side
Platform - flat/straddle One-piece semi flat
Rollover protective structure Type
Foldable
Yes

Power take-off (PTO)

Brake (for mid and rear PTO) Wet disk
Control Independent
Clutch Wet disk
Standard Rear: 540 rpm
Mid: 2100 rpm

Tires

Front tread range 931 mm
36.7 in.
Rear tread spacing 895 mm
35.2 in.
Rear R3 Turf: 26x12-12
R4: 26x12-12
Front R3 Turf: 18x8.50-10
R4: 18x8.5-10

Transmission

Brakes Wet disc (left-hand pedal)
Creeper No
Differential lock Yes
Final drive Spur gear
Left-hand reverser No
Steering Power
Cruise control No
Standard transmission; forward/reverse Hydrostatic - two range
Axle capacity Front
612 kg
1349 lb
Rear
715 kg
1576 lb

John Deere 1023E Image Gallery