Cooling system 62 L
16.3 U.S. gal.
Diesel exhaust fluid (DEF) tank 120 L
31.7 U.S. gal.
Crankcase oil volume 64 L
16.9 U.S. gal.
Fuel tank 1514 L
400 U.S. gal.
Transmission-hydraulic system With 3-point hitch and PTO: 227 L
60 U.S. gal.
Without 3-point hitch and PTO: 220 L
58 U.S. gal.


Wheelbase 4125 mm
162.4 in.
Approximate shipping weight, Open;Cab 20,582 kg
45,375 lb
Overall length Excluding hitch: 8309 mm
327.1 in.
Including hitch and coupler: 8545 mm
336.4 in.
Drawbar clearance 311 mm
12.2 in.


Drawbar category Category 5
Maximum vertical load 5440 kg
12,000 lb

Electrical system

Battery options 12 V
Alternator size Standard: 250 amp
Optional: 330 amp
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Optional: LED
Total cold cranking amps 3 x 925 CCA
Total: 2775 CCA
Working lights Standard: 18 halogen
Optional: 18 or 24 LED plus 8 LED conveninence lights

Engine performance

Power boost 10 percent
PTO torque rise 38 percent
Engine peak torque At 1600 rpm: 2723 Nm 2008 lb-ft
Rated power 434 kW
590 hp
Rated PTO power (hp SAE) 249 kW
335 hp
Maximum engine power 477 kW
649 hp

Engine specifications

Emission level Final Tier 4 (FT4)
Rated speed 2100 rpm
After treatment type Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Aspiration Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Description John Deere PowerTech 13.6L (B20 diesel compatible)
Engine type Diesel, inline, 6-cylinder, wet-sleeve cylinder liners with four valves in-head
Displacement 13.6 L
827 cu in.

Front axle

Front axle differential lock Full-locking electrohydraulic

Hydraulic system

Type Closed-center, pressure-and-flow compensated
SCV control Electronic
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) couplers: 159 L/min
42 gpm
Pump rated output Standard: 208 L/min
55 gpm
Optional: 416 L/min
110 gpm
Number of rear selective control valves (SCVs) Four to eight factory or field installed
Base: four 1.3-cm (1/2-in.) couplers
Optional: five to six 1.3-cm (1/2-in.) couplers factory installed
Optional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed

Key Specs

Hydraulic pump rated output Standard: 208 L/min
55 gpm
Optional: 416 L/min
110 gpm
Engine displacement 13.6 L
827 cu in.
Rear hitch category (SAE designation) Category 4N/4 with capacity: 6804 kg
15,000 lb
Category 4N/N: 9072 kg
20,000 lb
Rated engine power 434 kW
590 hp
Transmission type John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 40 km/h
25 mph
Maximum engine power 477 kW
649 hp
Rated PTO power (hp SAE) 249 kW
335 hp
Engine description John Deere PowerTech™ 13.6L (B20 diesel compatible)
Base machine weight 25,546 kg
56,320 lb


Country of manufacture USA

Operator station

Cab suspension Standard
Instructional seat Standard
Cab glass area 6.64 m2
71.47 sq ft
Display Standard: Generation 4 4600 CommandCenter™: 25.4 cm
10 in.
Optional: Extended monitor
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
25 degree (angle)
Air suspension
Inner cab volume 3.27 m3
115 cu ft
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Optional: Touchscreen radio

Precision AG

Remote diagnostics Available with activated JDLink hardware and activations
Guidance Integrated AutoTrac™
Telematic Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)

Rear axle

Final drive type Bull gear and double idler with floating pinion
Rear differential lock Full-locking electrohydraulic

Rear hitch

Sensing type Electrohydraulic with draft sensing
Hitch category (SAE designation) Category 4N/4 with capacity: 6804 kg
15,000 lb
Category 4N/4: 9072 kg
20,000 lb
Maximum lift capacity behind lift points Category 4N/4: 9072 kg
20,000 lb

Rear power take-off (PTO)

PTO actuation Electrohydraulic
Type Independent
44 mm (1.75 in.) 20-spline, 1000 rpm


Interval for hydraulic/transmission oil change 1500 hours
Interval for engine coolant change 6000 hours
Interval for engine oil change 500 hours


Type Standard: Hydraulic power steering
Optional: ActiveCommand Steering (ACS®)


Midrollers Two
Tread spacing Wide undercarriage: 2218 mm
87 in.
3048 mm
120 in.
Track width Standard: 762 mm
30 in.
914 mm
36 in.
Drive type Camso® 3500 and 6500 Ag Series - reinforced drive lug technology


Type John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h
25 mph


Maximum ballast level 30,391 kg
67,000 lb
Base machine weight 20,582 kg
45,375 lb

Additional information

Date collected 1 March 2021