Specifications

Capacities

Crankcase oil volume 64 L
16.9 U.S. gal.
Cooling system 56.5 L
14.9 U.S. gal.
Transmission-hydraulic system With 3-point hitch and PTO: 227 L
60 U.S. gal.
Without 3-point hitch and PTO: 220 L
58 U.S. gal.
Fuel tank 1514 L
400 U.S. gal.
Diesel exhaust fluid (DEF) tank 120 L
31.7 U.S. gal.

Dimensions

Approximate shipping weight, Open;Cab 20,856 kg
45,980 lb
Drawbar clearance Group 48 tires: 527 mm
20.7 in.
Wheelbase 3912 mm
154 in.
Overall length With front weights, excluding hitch and coupler: 7945 mm
312.8 in.
With front weights, including hitch and coupler: 8427 mm
331.8 in.

Drawbar

Drawbar category Category 4 or Category 5
Maximum vertical load Standard: 2470 kg
5450 lb
Optional: Category 4 with heavy-duty drawbar support: 2470 kg
Category 5 with heavy-duty drawbar support: 5440 kg
12,000 lb

Electrical system

Battery options 12 V
Alternator size Standard: 250 amp
Optional: 330 amp
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Optional: LED
Total cold cranking amps 3 x 925 CCA
Total: 2775 CCA
Working lights Standard: 18 halogen
Optional: 18 or 24 LED plus 8 LED conveninence lights

Engine performance

Power boost 10 percent
PTO torque rise 38 percent
Engine peak torque At 1600 rpm: 1800 Nm 1328 lb-ft
Rated PTO power (hp SAE) 249 kW
335 hp
Maximum engine power 316 kW
429 hp
Rated power 287 kW
390 hp

Engine specifications

After treatment type Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Description John Deere PowerTech 13.6L (B20 diesel compatible)
Aspiration Single wastegated turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Engine type Diesel, inline, 6-cylinder, wet-sleeve cylinder liners with four valves in-head
Rated speed 2100 rpm
Emission level Final Tier 4 (FT4)
Displacement 13.6 L
827 cu in.

Front axle

Front axle differential lock Full-locking electrohydraulic
Type Diameter: 120 x 3048 mm
4.72 x 120 in.

Hydraulic system

SCV control Electronic
Type Closed-center, pressure-and-flow compensated
Pump rated output Standard: 208 L/min
55 gpm
Optional: 416 L/min
110 gpm
Number of rear selective control valves (SCVs) Four to eight factory or field installed
Base: four 1.3-cm (1/2-in.) couplers
Optional: five to six 1.3-cm (1/2-in.) couplers factory installed
Optional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) couplers: 159 L/min
42 gpm

Key Specs

Maximum engine power 316 kW
429 hp
Base machine weight 20,856 kg
45,980 lb
Hydraulic pump rated output Standard: 208 L/min
55 gpm
Optional: 416 L/min
110 gpm
Rated PTO power (hp SAE) 249 kW
335 hp
Rear hitch category (SAE designation) Category 4N: 6804 kg
15,000 lb
Category 4N: 9072 kg
20,000 lb
Category 4N/4: 6804 kg
Category 4N/4: 9072 kg
Engine description John Deere PowerTech™ 13.6L (B20 diesel compatible)
Engine displacement 13.6 L
827 cu in.
Rated engine power 287 kW
390 hp
Transmission type John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 40 km/h
25 mph

Miscellaneous

Country of manufacture USA

Operator station

Instructional seat Standard
Display Standard: Generation 4 4600 CommandCenter™: 25.4 cm
10 in.
Optional: Extended monitor
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Optional: Touchscreen radio
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II
Cab glass area 6.64 m2
71.47 sq ft
Inner cab volume 3.27 m3
115 cu ft

Precision AG

Remote diagnostics Available with activated JDLink hardware and activations
Guidance Integrated AutoTrac™
Telematic Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)

Rear axle

Final drive type Inboard planetary with double-reduction axle
Rear differential lock Full-locking electrohydraulic
Type Diameter: 120 x 3048 mm
4.72 x 120 in.

Rear hitch

Sensing type Electrohydraulic with draft sensing
Hitch category (SAE designation) Category 4N: 6804 kg
15,000 lb
Category 4N: 9072 kg
20,000 lb
Category 4N/4: 6804 kg
Category 4N/4: 9072 kg
Maximum lift capacity behind lift points Category 4N/4: 9072 kg
20,000 lb

Rear power take-off (PTO)

PTO actuation Electrohydraulic
Type Independent
44 mm (1.75 in.) 20-spline, 1000 rpm

Serviceability

Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1500 hours
Interval for engine coolant change 6000 hours

Steering

Type Standard: Hydraulic power steering
Optional: ActiveCommand Steering (ACS™)

Tires

Turning radius with brakes Group 47 or Group 48 tires: 6.035 m
19.8 ft

Transmission

Type John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h
25 mph

Weight

Maximum ballast level 27,216 kg
60,000 lb
Base machine weight 20,856 kg
45,980 lb

Additional information

Date collected 1 March 2021