Bargain Barn
Key Features & Specs
- Adjust depth in six seconds on the go
- In-cab control of each functional area
- 1/10th-in. (2.5-mm) accuracy
- Expanded tractor compatibility
Specifications
Additional Features
| Option 1 | Hydraulically adjustable finishing attachments Knife-edge rolling basket Round-bar rolling basket Coil-tine harrow |
Depth
| Maximum operating depth | 40.6 cm 16 in. |
Depth control
| Option 1 | Single-point crank |
| Option 2 | TruSet™ tillage |
Ground engaging components
| Type | Wingless, LaserRip™ II points: 12.7 cm 5 in. 17.8 cm 7 in. 25.4 cm 10 in. |
| Coverboards | On parabolic standards: 10.2 cm 4 in. 15.2 cm 6 in. 20.3 cm 8 in. |
Hitch
| Fore-aft adjustment | Hitch turnbuckle |
| Design | Single tube |
Horsepower
| Horsepower required per standard | 25.1-41 kW 34-55 hp |
Hydraulics
| Option 2 | 5 SCVs (depth control, front disk, rear conditioner, wingfold, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
| Option 1 | 4 SCVs (depth control, front disk, rear conditioner, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
Key Specs
| Standards | Spacing 61 cm 24 in. |
| Operating speed | 8-11.3 km/h 5-7 mph |
| Transport width | Option 1: Individual blades: 6.1 m 19.9 ft Disk gangs: 5.7 m 18.8 ft Option 2: Individual blades: 6.9 m 22.5 ft Disk gangs: 6.9 m 22.5 ft Option 3: Individual blades: 5.7 m 18.8 ft Disk gangs: 5.8 m 19.1 ft Option 4: Individual blades: 5.6 m 18.3 ft Disk gangs: 5.7 m 18.7 ft Option 5: Individual blades: 5.6 m 18.3 ft Disk gangs: 5.6 m 18.3 ft |
| Working width | Option 1: 4.3 m 14 ft Option 2: 5.5 m 18 ft Option 3: 5.5 m Option 4: 6.7 m 22 ft Option 5: 7.9 m 26 ft |
| Maximum operating depth | 40.6 cm 16 in. |
| Horsepower required per standard | 25.1-41 kW 34-55 hp |
Mulching disk components
| Front frame angle | Fixed: 18 degree (angle) |
| Bearings | Sealed, maintenance-free |
| Scraper | Heavy-duty floating combination scraper (base option) |
| Type of standard | C-spring |
| Description | X-type configuration at front of tool |
| Rear frame angle | Fixed: 18 degree (angle) |
| Depth control | TruSet in-cab controls Single-point depth control |
| Maximum depth | 20.3 cm 8 in. |
| Blade spacing | Individual: 45.7 cm 18 in. Effective - 22.9 cm 9 in. Disk gang: 27.9 cm 11 in. Effective: 14 cm 5.5 in. |
| Base equipment blades | Solid spherical low-concavity disk blades: 660x6 mm 26x0.25 in. |
Rear conditioner
| Bearings | Sealed, maintenance-free |
| Description | Solid-spherical low concavity closing disks (notched optional) |
| Base equipment blades | Individual dual mount: 45.7 cm 18 in. |
| Adjustments | TruSet in-cab controls Mechanical |
Speed
| Operating speed | 8-11.3 km/h 5-7 mph |
Standards
| Spacing | 61 cm 24 in. |
Standards, Option 1
| Type | Parabolic with or without wear shins, straight with wear shins |
| Trip height | Shear bolt protected above: 33 cm 13 in. |
| Trip force | Cushion-trip standard: 1,859.7 kg 4,100 lb |
Tool
| Configuration | Disk - Disk - Ripper - Closing Disk - Finishing Attachment |
| Option 5 | Folding 13-standard on spacing of 61 cm 24 in. |
| Option 1 | Rigid 7-standard on spacing of 61 cm 24 in. |
| Option 3 | Folding 9-standard on spacing of 61 cm 24 in. |
| Option 4 | Folding 11-standard on spacing of 61 cm 24 in. |
| Option 2 | Rigid 9-standard on spacing of 61 cm 24 in. |
Transport clearance
| Standard | 33 cm 13 in. |
Transport width
| Option 4 | Individual blades: 5.6 m 18.3 ft Disk gangs: 5.7 m 18.7 ft |
| Option 2 | Individual blades: 6.9 m 22.5 ft Disk gangs: 6.9 m |
| Option 5 | Individual blades: 5.6 m 18.3 ft Disk gangs: 5.6 m |
| Option 1 | Individual blades: 6.1 m 19.9 ft Disk gangs: 5.7 m 18.8 ft |
| Option 3 | Individual blades: 5.7 m 18.8 ft Disk gangs: 5.8 m 19.1 ft |
Underframe clearance
| Maximum | 95.25 cm 37.5 in. |
Wheels
| Type | Tandem walk-over wheels |
Working width
| Option 3 | 5.5 m 18 ft |
| Option 4 | 6.7 m 22 ft |
| Option 1 | 4.3 m 14 ft |
| Option 2 | 5.5 m 18 ft |
| Option 5 | 7.9 m 26 ft |
