2230FH

  • John Deere
  • Field Cultivators & Mulch Finishers

Contact Your Preferred Store:

John Deere 2230FH
  • Working widths from 25ft, 6 in. to 69 ft, 6 in. (7.8 to 21.2 m)
  • Follows ground contour, stays level
  • Lattice-style frame design
  • Hydraulically adjustable rolling baskets

Specifications

Centerframe depth control wheels and tires

Type Center frame tires on Walk-Over tandem wheels (bias-ply tire option available)
3-section Option 1: (4) IF280/70 R15 134D tires
Option 2: (4) IF280/70 R15 134D tires
Option 3: (4) IF280/70 R15 134D tires
Option 4: (4) IF280/70 R15 134D tires
Option 5: (4) IF280/70 R15 134D tires
Option 6: (4) IF320/70 R15 144D tires

Depth control

Standard Single-point depth control in base
Options Add TruSet™ in-cab depth/pressure control

Electrical requirements

Standard 9-pin connector for warning lights
Options If adding TruSet, tractor must be GreenStar™ system-ready

Fold

Type Over-center fold

Frame

Number of ranks 3-section
Option 1: 3.4-m (11-ft) center frame with 5-rank tube frame
Option 2: 3.4-m (11-ft) center frame with 5-rank tube frame
Option 3: 3.4-m (11-ft) center frame with 5-rank tube frame
Option 4: 3.4-m (11-ft) center frame with 5-rank tube frame
Option 5: 3.4-m (11-ft) center frame with 5-rank tube frame
Option 6: 3.4-m (11-ft) center frame with 5-rank tube frame
5-section
Option 7: 3.4-m (11-ft) center frame with 5-rank tube frame
Option 8: 3.4-m (11-ft) center frame with 5-rank tube frame
Option 9: 3.4-m (11-ft) center frame with 5-rank tube frame
Option 10: 3.4-m (11-ft) center frame with 5-rank tube frame
Option 11: 3.4-m (11-ft) center frame with 6-rank tube frame
Option 12: 3.4-m (11-ft) center frame with 6-rank tube frame
Option 13: 4.6-m (15-ft) center frame with 6-rank tube frame
Option 14: 4.6-m (15-ft) center frame with 6-rank tube frame
Fore-and-aft clearance On 2.7-m and 3.4-m (9-ft and 11-ft) center frames: 134 in.
3.4 m
On 4.6-m (15-ft) center frames: 164 in.
4.2 m
Underframe clearance 610 mm
24 in.

Ground-engaging components

Options Wide variety of sweeps, shovels, and points

Hitch

Type Floating hitch: 15.2x25.4 cm
6x10 in.
T-hitch, cast-steel hitch link, optional rear hitch

Horsepower required

Horsepower per foot 19.6 to 29.4 kW/m
8 to 12 hp/ft

Hydraulic requirements

Standard 2 SCVs (lift and fold) at 17,237 kPa (2500 psi) for optimum raise times; additional SCV needed for optional rolling basket down pressure

Key Specs

5-section Option 7: 3.83 m (12.58 ft)
Option 8: 3.83 m (12.58 ft)
Option 9: 4.14 m (13.58 ft)
Option 10: 4.32 m (14.17 ft)
Option 11: 4.65 m (15.25 ft)
Option 12: 4.95 m (16.25 ft)
Option 13: 5.05 m (16.58 ft)
Option 14: 5.36 m (17.58 ft)
Horsepower per foot 19.6 to 29.4 kW/m
8 to 12 hp/ft
Miles per hour 10 to 16 km/h
6 to 10 mph
5-section Option 7: 12.34 m (40.5 ft)
Option 8: 13.53 m (44.5 ft)
Option 9: 14.78 m (48.5 ft)
Option 10: 16 m (52.5 ft)
Option 11: 17.22 m (56.5 ft)
Option 12: 18.44 m (60.5 ft)
Option 13: 19.66 m (64.5 ft)
Option 14: 21.2 m (69.5 ft)
Working widths - 3-section Option 1: 7.77 m (25.5 ft)
Option 2: 8.99 m (29.5 ft)
Option 3: 9.6 m (31.5 ft)
Option 4: 10.21 m (33.5 ft)
Option 5: 10.82 m (35.5 ft)
Option 6: 12.95 m (42.5 ft)
Transport height (without rear harrow) - 3-section Option 1: 3.43 m (11.25 ft)
Option 2: 3.94 m (12.92 ft)
Option 3: 4.22 m (13.83 ft)
Option 4: 4.52 m (14.83 ft)
Option 5: 4.9 m (16.08 ft)
Option 6: 4.22 m (13.83 ft)
Rigid frame - 3-section Option 1: 4.75 m (15.58 ft)
Option 2: 4.75 m (15.58 ft)
Option 3: 4.75 m (15.58 ft)
Option 4: 4.82 m (15.83 ft)
Option 5: 4.85 m (15.92 ft)
Option 6: 5.33 m (17.5 ft)
Standard spacing - Inches 8 to 12 hp/ft
6 in.
*22.9 cm
9 in.
and S-tine *11.4 cm
4.5 in.
options
(*spacing may not be exact in all locations)
5-section Option 7: 4.88 m (16 ft)
Option 8: 4.88 m (16 ft)
Option 9: 4.88 m (16 ft)
Option 10: 4.9 m (16.08 ft)
Option 11: 4.93 m (16.17 ft)
Option 12: 4.95 m (16.25 ft)
Option 13: 7.16 m (23.5 ft)
Option 14: 7.16 m (23.5 ft)
Operating depth - Inches Up to 12.7 cm
5 in.

Operating depth

Inches Up to 12.7 cm
5 in.

Operating speed

Miles per hour 10 to 16 km/h
6 to 10 mph

Rear attachments

Coil tine harrow option 2


Spike tooth harrow option 2


Spike tooth harrow option 3


Rolling basket harrow option 4
Spike/tine spacing
26.7 cm
10.5 in.
Effective spacing
4.45 cm
1.75 in.
Spike/tine dimensions
1.9x1.9x30.5 cm
0.75x0.75x12 in.


Adjustments
Tool-free harrow adjustments ranging from 23 to 51 degree (angle)
and hydraulically adjustable baskets up to 5,516 kPa
800 psi
3-bar spike tooth with flat-bar basket
Rolling basket harrow option 1
Rank spacing
38.1 cm
15 in.
Effective spacing
7.62 cm
3 in.
Spike/tine dimensions
Length: 40.6 cm
16 in.
Basket diameter
35.6 cm
14 in.
Bar type
Round
Bar size
Round bar: 2.54 cm
1 in.
Thickness: 0.32 cm
0.125 in.
Bearings
Maintenance-free
Adjustments
Tool-free harrow adjustments ranging from 36 to 75 degree (angle)
and hydraulically adjustable baskets up to 5,516 kPa
800 psi
3-bar coil-tine with round-bar basket
Coil tine harrow option 1 Rank spacing
38.1 cm
15 in.
Tine spacing
22.9 cm
9 in.
Effective spacing
5.72 cm
2.25 in.
Tine dimensions
Long: 40.6 cm
16 in.
Angle
36 to 75 degree (angle)
Adjustments
Tool-free four-position pin adjustments ranging from 36 to 75 degrees
4-bar coil-tine harrow
Rolling basket harrow option 2
Rank spacing
38.1 cm
15 in.
Effective spacing
7.62 cm
3 in.
Spike/tine dimensions
Length: 40.6 cm
16 in.

Bar type
Flat
Bar size
3.8x0.64 cm
1.5x0.25 in.
Bearings
Maintenance-free
Adjustments
Tool-free harrow adjustments ranging from 36 to 75 degree (angle)
and hydraulically adjustable baskets up to 5,516 kPa
800 psi
3-bar coil tine with flat-bar basket
Spike tooth harrow option 1 Rank spacing
30.5 cm
12 in.
Spike spacing
26.67 cm
10.5 in.
Effective spacing
3-bar: 8.89 cm
3.5 in.
6-bar: 4.45 cm
1.75 in.
Spike dimension
1.9x1.9x30.5 cm
0.75x0.75x12 in.
Angle
23 to 51 degree (angle)
Adjustments
Tool-free three-position pin adustment
6-bar spike-tooth harrow
Rolling basket harrow option 3
Spike/tine spacing
26.7 cm
10.5 in.
Effective spacing
4.45 cm
1.75 in.
Spike/tine dimensions
1.9x1.9x30.5 cm
0.75x0.75x12 in.


Adjustments
Tool-free harrow adjustments ranging from 23 to 51 degree (angle)
and hydraulically adjustable baskets up to 5,516 kPa
800 psi
3-bar spike tooth with round-bar basket

Rear hitch

Hydraulic hoses and couplers Two circuits provided
Tongue weight rating Varies by working width
Vertical weight: 680.3 kg
1,500 lb

Stabilizer wheels

Type Mechanical stabilizer wheels and tires (radial tire option available)
3-section Option 1: (4) 11L-15D FI LR D tires
Option 2: (4) 11L-15D FI LR D tires
Option 3: (4) 11L-15D FI LR D tires
Option 4: (4) 11L-15D FI LR D tires
Option 5: (4) 11L-15D FI LR D tires
Option 6: (6) 12.5-L-15 FI LR D tires
5-section Option 7: (6) 12.5-L-15 FI LR D tires
Option 8: (6) 12.5-L-15 FI LR D tires
Option 9: (6) 12.5-L-15 FI LR D tires
Option 10: (6) 12.5-L-15 FI LR D tires
Option 11: (6) 12.5-L-15 FI LR D tires
Option 12: (6) 12.5-L-15 FI LR D tires
Option 13: (6) 12.5-L-15 FI LR D tires
Option 14: (6) 12.5-L-15 FI LR D tires

Standard options

Option 1 Spec
C-shank: 1.9x4.45x61 cm
0.75x1.75x24 in.
Trip force
90.7 kg
200 lb
Trip height
25.4 cm
10 in.
Maximum operating depth
12.7 cm
5 in.
Underframe clearance
61 cm
24 in.
Spacing
True 15.2 cm
6 in.
split-the-middle spacing
TruPosition™ standard
Option 3 Spec
1.27x4.45 cm
0.5x1.75 in.

Underframe clearance
61 cm
24 in.
Spacing
11.4 cm
4.5 in.
S-tine
Option 2 Spec
1.59x4.45 cm
0.625x1.75 in.
Trip force
68 kg
150 lb
Trip height
25.4 cm
10 in.
Maximum operating depth
12.7 cm
5 in.
Underframe clearance
61 cm
24 in.
Spacing
15.2 cm
6 in.
or 22.9 cm
9 in.
TruPosition

Standard spacing

Inches Split-the-middle: 15.2 cm
6 in.
*22.9 cm
9 in.
and S-tine *11.4 cm
4.5 in.
options
(*spacing may not be exact in all locations)

Transport height (without rear harrow)

5-section Option 7: 3.83 m (12.58 ft)
Option 8: 3.83 m (12.58 ft)
Option 9: 4.14 m (13.58 ft)
Option 10: 4.32 m (14.17 ft)
Option 11: 4.65 m (15.25 ft)
Option 12: 4.95 m (16.25 ft)
Option 13: 5.05 m (16.58 ft)
Option 14: 5.36 m (17.58 ft)
3-section Option 1: 3.43 m (11.25 ft)
Option 2: 3.94 m (12.92 ft)
Option 3: 4.22 m (13.83 ft)
Option 4: 4.52 m (14.83 ft)
Option 5: 4.9 m (16.08 ft)
Option 6: 4.22 m (13.83 ft)

Transport width (without rear harrow)

Rigid frame 6.86 m
22.5 ft
3-section Option 1: 4.75 m (15.58 ft)
Option 2: 4.75 m (15.58 ft)
Option 3: 4.75 m (15.58 ft)
Option 4: 4.82 m (15.83 ft)
Option 5: 4.85 m (15.92 ft)
Option 6: 5.33 m (17.5 ft)
5-section Option 7: 4.88 m (16 ft)
Option 8: 4.88 m (16 ft)
Option 9: 4.88 m (16 ft)
Option 10: 4.9 m (16.08 ft)
Option 11: 4.93 m (16.17 ft)
Option 12: 4.95 m (16.25 ft)
Option 13: 7.16 m (23.5 ft)
Option 14: 7.16 m (23.5 ft)

Wing frame wheels and tires

Type Wing frame tires on Walk-Over tandem wheels (radial tire option available)
3-section Option 1: (6) 11L-15 FI LR D tires
Option 2: (6) 11L-15 FI LR D tires
Option 3: (6) 11L-15 FI LR D tires
Option 4: (6) 11L-15 FI LR D tires
Option 5: (6) 11L-15 FI LR D tires
Option 6: (6) 12.5-L-15 FI LR D tires
5-section Option 7: (6) 12.5-L-15 FI LR D tires
Option 8: (6) 12.5-L-15 FI LR D tires
Option 9: (6) 12.5-L-15 FI LR D tires
Option 10: (6) 12.5-L-15 FI LR D tires
Option 11: (6) 12.5-L-15 FI LR D tires
Option 12: (6) 12.5-L-15 FI LR D tires
Option 13: (6) 12.5-L-15 FI LR D tires
Option 14: (6) 12.5-L-15 FI LR D tires

Working widths

5-section Option 7: 12.34 m (40.5 ft)
Option 8: 13.53 m (44.5 ft)
Option 9: 14.78 m (48.5 ft)
Option 10: 16 m (52.5 ft)
Option 11: 17.22 m (56.5 ft)
Option 12: 18.44 m (60.5 ft)
Option 13: 19.66 m (64.5 ft)
Option 14: 21.2 m (69.5 ft)
3-section Option 1: 7.77 m (25.5 ft)
Option 2: 8.99 m (29.5 ft)
Option 3: 9.6 m (31.5 ft)
Option 4: 10.21 m (33.5 ft)
Option 5: 10.82 m (35.5 ft)
Option 6: 12.95 m (42.5 ft)