![John Deere DH51 Series](https://pape-foursite-stage.s3.amazonaws.com/agriculture.papemachinery.com/9908f3fd-091d-49f9-82d1-49238aae1d7f.jpg)
DH51 Series Offset Disks
- John Deere
- Disks and Vertical Tillage
Find Your Nearest Location
- Adjustable disk blade scrapers increase productivity
- Notched or smooth disk blades available in two sizes
- Durable clevis hitch
- Oil bath tapered roller bearings minimize maintenance
![](https://pape-foursite-stage.s3.amazonaws.com/agriculture.papemachinery.com/9908f3fd-091d-49f9-82d1-49238aae1d7f.jpg)
- + Expand All
- - Close All
-
End washers and wrenches keep gang shaft end nut tight
Keeping gangs tightened increases wear life
Gang nut wrenches are always there when needed
End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.
Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.
-
Clevis hitch is durable for those tough working conditions
Clevis hitch makes hookup easy
Clevis hitch is built strong for tough jobs
The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.
-
Rear hitch for attaching an additional implement
Allows operator to pull an additional implement
A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag.
-
Two separate control arms create consistent performance
Control arms level in ground and during transport
Easy to set for desired soil condition
Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.
-
Adjustable disk blade scrapers increase productivity
Scrapers clean disk blades
Scrapers work great in wet and sticky soils
Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.
-
Transport locks secure disk wings
Transport locks secure disk wings cylinder
Transport locks are standard, ensuring disk wings are in secure transport mode.
-
Oil bath tapered roller bearings minimize maintenance
Minimal maintenance increases work hours
Sealed with industrial-grade seals
Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.
-
Disk blades (notched or smooth) available in two sizes
Notched disk blades
Smooth disk blades
Disk blades are available in 66-cm or 71-cm (26-in. or 28-in.) diameters. Disk blades are available in smooth blades, notched blades, or a combination of front notched blades and rear smooth blades to meet a variety of needs.
For superior penetration in tough soil conditions, weight per blade ranges from 108.9 kg to 154.7 kg (240 lb to 341 lb) depending on the offset disk series and model.
Available blade sizes
Blade option one | 660x7.9 mm 26x0.312 in. |
Blade option two | 711x7.9 mm 28x0.312 in. |
Disk blades
Blade concavity | Standard high, Optional low |
Spacing | 26.7 cm 10.5 in. |
Quantity | 27 |
Type | Notched (front) Notched (rear) Standard Smooth (front) Smooth (rear) Optional Notched (front) Smooth (rear) Optional |
Disk gangs
Front angle | 2 Positions |
Scrapers | Adjustable |
Rear angle | 2 Positions |
Axle material | Round Heat Treated Alloy Steel Threaded on Both Ends |
Axle size | 4.1 cm 1.625 in. or 5.4 cm 2.125 in. |
Bearing standards | Welded, Reinforced |
Bearing wear plates | Standard |
Bearing type | Oil Bath Tapered Roller |
Frame
Duty | General Purpose |
Tube size | 12.7x12.7x0.95 cm 5x5x0.375 in. |
Type | Single Offset Rigid |
Hitch
Front hitch type | Spade |
Key Specs
Disk blades | |
Frame |
Lighting and safety
Safety tow chain | Yes |
Markings | SMV |
Lights | Yes |
Set-up time
Labor hours | 2-3 for two people |
Tires
Type | Implement - Quantity of 4 |
Wheel hub type | 6 Bolt |
Size | 9.5L x 15-in. 8 ply |
Tractor requirements
Recommended PTO hp range | 96-118 kW 129-159 hp |
Recommended drawbar hp range | 82-100.7 kW 110-135 hp |
Transport
Width | 4 m 13 ft |
Ground clearance with base blades | 20.3 cm 8 in. |
Wheel hub bearings | Dual Tapered Roller Bearings |
Warranty
Time period | 1 year |
Weight
Net | 2,887.1 kg 6,365 lb |
Weight per disk blade | 115.7 kg 235 lb |
Working
Maximum penetration | 22.9 cm 9 in. |
Approximate working width | 3.7 m 12 ft |
![](https://pape-foursite-stage.s3.amazonaws.com/agriculture.papemachinery.com/9908f3fd-091d-49f9-82d1-49238aae1d7f.jpg)