730 Air Disk Drill
- John Deere
- Air Drills
Find Your Nearest Location
Key Features & Specs
- See the flow of seed & fertilizer from the cab with RelativeFlow™ blockage monitoring
- Double-disk openers offer precise depth
- Three tool widths and two seed row spacings
- Field Doc™ and Map-Based Prescriptions
- Opener Double-disk openers
- Transport Width 16 ft. 3 in., 19 ft.
- Fertilizer Placement In Furrow
- Working Width 28 ft., 36 ft., 44 ft.
-
Row Spacing
6 in. (15-cm)
7.5 in. (19-cm)
- + Expand All
- - Close All
-
Integration advantages of Deere tractor, cart, tool and technology
To win big in small grains, it takes a seeding solution that superseeds your expectations. John Deere delivers with a complete line of everything you need – and the sizes you want – to seed for success. Air-hoe drills. Commodity air carts. No-till air drills. Openers. Fertilizer attachments. Central commodity systems. Box drills. Plus precision ag technology to stretch your productivity to higher levels. But it’s far more than iron and technology. It’s the exceptional agronomic know-how and unsurpassed dealer support in all phases of production to keep you running. With our latest additions to equipment and openers, our seeding solutions deliver the next-generation performance you need to help you reach the full potential of each seed. That’s our commitment to you.
-
730 Level-Lift™ frame handles moderate residue with faster working speeds and consistent depth control
The 730 Level-Lift Air Disk Drill frame is very similar to the 2210 Level-Lift Field Cultivator. The 730 LL Air Disk Drill is a secondary tillage and seeding tool, an industry exclusive from John Deere. This frame is designed to offer durable support for the double disk openers while providing flexibility over level to gently rolling terrain.
Frame components include:
- Front-mounted rockshaft
- Tube-Thru-Tube frame
- Hose and wiring harness support and protection
Faster working speeds and consistent depth are results of the above features.
The 730 Level-Lift frames are:
- Constructed of continuous five-bar Tube-Thru-Tube frame
- 10.2-cm x 10.2-cm (4-in. x 4-in.) cross members
- 7.6-cm x 15.2-cm (3-in. x 6-in.) centerframe hitch tubes
- 5-cm x 12.7-cm (2-in. x 5-in.) end tubes
The large frame member sizes, joint welds, and the wheel module placement add to the structural integrity, providing stable, consistent front-to-rear and side-to-side operation.The frame:
- Is 3.4-m (11.2-ft) deep frame (fore-aft)
- Has 61-cm (24-in.) under-frame clearance
- Can handle residue amounts of up to 40 percent
The wings flex 7 degree up and down. They fold over center for a compact transport or storage profile.
The front-mounted rockshaft:
- Offers superior front-frame strength for unmatched side-to-side levelness
- Provides torsional rigidity for the hydraulic system
- Opens up the frame for true shank placement, improving overall residue flow
The TruPosition™ shanks have a trip force at 90.7 kg (200 lb) and a 25.4-cm (10-in.) trip height.
-
Manually steer using a simple user interface
Manual guidance allows operators to manually steer by matching the machine icon with the line on the screen or by using the path accuracy indicator at the top of the guidance view screen.
-
Double-disk openers offer precise depth
The 34.3-cm (13.5-in.) diameter double-disk openers are offset to create a narrow furrow for optimal seed placement. They feature aluminum boots and have a long-arm/short-arm stagger for residue clearance. Either 15.2-cm (6-in.) or 19-cm (7.5-in.) row spacing is available.
NOTE: 15.2-cm (6-in.) spacing is not recommended for heavy, sticky soils such as the Red River Valley of the North.
The 6-mm (1/4-in.) offset creates a leading edge and pinch point that is close to the soil surface for optimal penetration and residue cutting. Alternating of the blades with right and left leading edge prevents side drafting and leaves the field smooth with minimal soil throw.
-
Depth-gauging press wheels give accurate seed placement
Depth-gauging press wheels:
- Allow quick, easy opener depth control
- Assist in controlling furrow depth
- Promote positive seed-to-soil contact for good germination
- Adjustments can be made from 0 cm (0 in.) to 9 cm (3.5 in.) by increments of 6 mm (1/4 in.)
5-cm x 33-cm (2-in. x 13-in.) press wheels are available on the 730
For 15.2-cm (6-in.) row spacing:
- 5-cm (2-in.) x 33-cm (13-in.) (A) (standard equipment)
NOTE: 15.2-cm (6-in.) row spacing is not recommended for high-residue conditions or sticky soils like in the Red River Valley of the North.
For 19-cm (7.5-in.) row spacing:
- 5-cm (2-in.) x 33-cm (13-in.) (A) (standard equipment)
Clearance
Between ranks range | 29 to 41-in. (73.7 to 104 cm) |
Hydraulics | active hydraulic downpressure |
Underframe clearance | 24.1 in. 60.9 cm |
Fore-and-aft | 134 in. 3.51 m |
Freight
Shipping location | Des Moines, IA |
Harrow
Type | Tine tooth |
Attachment | Rolling Basket with 1-bar harrow |
Key Specs
Opener - Type | Double disk |
Number of sections | 3 |
Mainframe - Wing flexibility | 11 degrees up, 9 degrees down |
Harrow - Attachment | Rolling Basket with 1-bar harrow |
Harrow - Type | Tine tooth |
Number of ranks | 4 ranks of c-shanks,1 rank seed openers |
Seeding tool depth control - Range | 1/4 inch increments |
Working widths | 28 ft 8.7 m |
Mainframe - Centerframe width | 11-ft. 8-in. 3.56 m |
Underframe clearance | 24 in. 60.9 cm |
Mainframe
Wing flexibility | 11 degrees up, 9 degrees down |
Cross tubes | 4x4-in. (102x102 mm) |
Type | 3-section drawn flexible |
End tubes | 2x5-in. (50x127 mm) |
Hitch (tubular steel) | 6x10-in. (76x152 mm) |
Folding | over-center |
Centerframe width | 3.56 m 11-ft. 8-in. |
Size | 28 ft 8.7 m |
Rockshaft | 5.5 x 0.312-in. 140 x 7.92 mm |
Opener
Penetration force | Patented Active Hydraulic |
Size | 13.5-in. (343 mm) with 0.25-in. (6 mm) offset |
Type | Double disk |
Boot | aluminum |
Spacing | 6-in. (15.2 cm) or 7.5-in. (19.1 cm) |
Down pressure | Opener down pressure: 105 lb./opener Press wheel down pressure: 65 lb. at 1500 psi |
Quantity | 46 on 7.5-in. spacing 56 on 6-in. spacing |
Seeding tool depth control
Type | On individual openers |
Range | 1/4 inch increments |
Shanks
Arc | 47 degree |
Finishing tool | double bar harrow or rolling basket with single bar harrow |
Type | Tru-Position |
Quantity | 37 |
Trip force | 200 lb 890 N |
Trip clearance | 10 in. 25.4 cm |
Size | 3/4 x 1-3/4 x 24-in. 19 x 44 x 610 mm |
Spacing | 9 in. 22.8 cm |
Sizes
Number of ranks | 4 ranks of c-shanks,1 rank seed openers |
Number of sections | 3 |
Working widths | 8.53 m 28 ft |
Tires
Gauge wheels, wing | 2-7.60x15 8PR |
Castering stabilizer | (2) 7.60x15 8 PR |
Centerframe; standard | (4) 11Lx15 Load Range D walk-over tandems |
Wing; standard | (4) 9.5Lx15 Load Range D walk-over tandems |
Tractor hydraulic requirements
Minimum SCVs | 2 SCVs |
Transport position
Width | 16-ft. 3.6-in. (4.97 m) |
Height | Maximum height: 12-ft. 9.3-in (3.90 m) Minimum height: 11-ft. 4.3-in (3.46 m) |
Transport clearance | With sweep extenders: 16.26-in. (413 mm) Without sweep extenders: 17.26-in. (438 mm) |
Warning lights
Standard | Yes |