D630 Draper
- John Deere
- Windrowers
Find Your Nearest Location
Key Features & Specs
- 30 ft. (9.1 m) cut width
- Compatible with W200M, W235M, W235R and W260R
- Hydraulic tilt John Deere cutter bar
- Ground speed matching
- Integrated controls
- + Expand All
- - Close All
-
Interchangeable with John Deere rotary platforms
D600 Draper has an interchangeable rotary platform:
- Interchangeable on W200M and R Series units in 30 minutes or less
- Growers can use one traction unit for harvesting both small grains and hay
-
Hydraulic deck shift (double swath package)
John Deere D625, D630, and D636 Drapers can windrow out of the center, right, or left ends of the draper with the press of a button using the hydraulic shift option (double swath package).
- Larger windrows to match combine or self-propelled forage harvester
- Match narrower-width drapers with higher-capacity harvesting
- Place higher-density windrows in front of harvesters when yields are low
- Discharge two windrows side by side for uniform combine or forage harvester feeding
-
Higher productivity with center-driven belts
Center-driven belts
- Deliver increased torque
- Enable greater productivity with minimal belt slippage
- Increase performance in heavy crop conditions
- Draper belts on the D600 are driven from the center of the platform
- Delivers increased belt performance compared to drapers with end-driven belts
Belt drive motors
Due to the motors pulling the belt (instead of pushing in an end drive system), there is less slack in the belt. This delivers an increase in belt torque.
As a result, producers experience minimal belt slippage and increased performance in heavy crop conditions due to the center-driven belt system.
-
Draper hydraulic pump control logic delivers constant header speed
The draper hydraulic pump control adjusts knife, belt, and reel speeds to match the ground speed. This provides consistent feeding as you move through the field.
-
Strong, positive-feeding reel handles all crop conditions
The D600 Series includes an improved cam reel that increases durability in heavy crop conditions. The dual cam drive offers more versatility for operators to match their crop conditions and offers more reel torque for heavy crop conditions. The system can be quickly reconfigured by changing quick couplers to offer a series configuration for a higher reel speed to meet the needs of lighter crop conditions.
.
- Easy reel tooth replacement is done with a 90-degree turn using a wrench. It allows the reel tooth to be removed and replaced.
- Additional teeth can be added at any location along the extruded tooth bar.
-
John Deere parts and service support provide uptime for a timely harvest
Sales, parts, and service support from a local John Deere dealer offers overnight parts delivery and a well-trained support staff.
Auxiliary top auger
Type | Optional: factory-installed cross-pea auger |
Cutterbar
Knife speed | 1,100 to 1,440 spm |
Cutterbar tilt | Hydraulic, adjustable from cab |
Knife drive | Two hydraulic motors and two knife drives |
Type | SCH® Easy Cut with roller guides, spring steep guards, and bolted sections Standard: single knife or dual knife |
Cut width (length) | 7.6 m 25 ft |
Stroke length | 84 mm 3.3 in. |
Dimensions
Transport width (reel fully retracted) | 2.6 m 8.5 ft |
Operating width (field) | 7.6 m 25 ft |
Transport length, hitch extended | 9 m 29.6 ft |
Transport height | 2.44 m 8 ft |
Draper and decks
Remote canvas speed control | Standard |
Draper drive | Two hydraulic motors |
Speed control | Adjustable in windrower cab |
Deck tilt | Standard |
Delivery opening height | 205.7 cm 81 in. |
Deck extensions | Optional, dealer-installed deck extensions: 35.6 cm 14 in. |
Belt width | V-guided draper belt: 106.7 cm 42 in. |
Delivery opening width | Delivery, double swath opening: 137.2 cm 54 in. Delivery, single swath opening: 203.2 cm 80 in. |
Operating speed | 0 to 232 m/min 0 to 760 fpm |
Gauge wheels and transportation
Integrated slow speed transport system | Self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table |
Gauge wheels | Adjustable castoring gauge wheel optional |
Key Specs
Reel type | Hydraulic |
Fingers | Plastic |
Belt width | V-guided draper belt: 106.7 cm 42 in. |
Cut width (length) | 7.6 m 25 ft |
Transport length, hitch extended | 9 m 29.6 ft |
Cutterbar - Type | SCH® Easy Cut with roller guides, spring steep guards, and bolted sections Standard: single knife or dual knife |
Reel
Height control | Hydraulic, adjustable from cab |
Number of bats | Six |
Fingers | Plastic |
Reel lift | Hydraulic, adjustable from cab |
Speed control | Hydro handle, in cab |
Reel type | Hydraulic |
Reel fore and aft | Hydraulic, adjustable from cab |
Diameter | 1118 mm 44 in. |
Weight
Approximate weight (base platform without reel) | 1036 kg 2869 lb |
Approximate weight (base platform with reel) | 2280 kg 5026 lb |